Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Contents Installation ............................................................................................. 3 Step 1: Hardware Installation ............................................................... 3 Step 2: BIOS Configuration.................................................................. 4 Step 3: Driver Installation ................................................................... 5 Step 4: What’s next? ........................................................................
Resumo do conteúdo contido na página número 3
Installation The 10/100Mbps PCI bus Fast Ethernet Card requires Hardware installation first, then BIOS and Driver installation. Step 1: Hardware Installation 1. Turn off your computer and disconnect the power cable. 2. Remove the cover from your computer. Please check your computer’s documentation (particularly your warranty details) for instructions and warnings regarding the removal of covers or installation of add-in boards. 3. Select an empty PCI slot and remove the appropriate expansion
Resumo do conteúdo contido na página número 4
8. Connect the other end of the network cable into a port on your Ethernet hub. 9. Reconnect the power cable and turn on your computer. 10. You may need to follow Step 2: BIOS Configuration. If not, continue to Step 3: Driver Installation and follow the section for your operating system to complete installation of the PCI Network Adaptor. NOTE: You may be asked for your original Windows® CD during the installation process, please have it ready. If your computer came with Windows® pre loaded
Resumo do conteúdo contido na página número 5
Step 3: Driver Installation Before you connect the 10/100Mbps PCI bus Card to the network, you will need to install the appropriate network driver for your operating system. The driver for each networking operating system is included under separate directories on the CD-ROM included with your card. Also included on the CD-ROM is a Help file. If your operating system (eg Linux) is not included in this Quick Start Guide, refer to the Help file for more information. 1. Click on Start - Run and typ
Resumo do conteúdo contido na página número 6
Windows® 95/98 1. As Windows® 95/98 starts the PCI Network Adapter will be found and the Add New Hardware Wizard will start. Click on Next>. 2. Select Search for the best driver for you device (Recommended) and click on Next>. 3. Insert the 110/100Mbps Driver CD- ROM into your CD-ROM drive. 6 NP1100 10/100Mbps PCI Bus Fast Ethernet Card YML567 Rev2
Resumo do conteúdo contido na página número 7
4. Select Specify a location and type in D:\WIN98 for Windows®98 or D: WIN95 for Windows®95 (where “D” is the letter of your CD-ROM drive) and click on Next >. 5. Follow the Add New Hardware Wizard to complete installation of your network card. You may be prompted to insert your Windows®98 or Windows®95 CD- ROM to continue with the installation of the network card. Restart your computer, when prompted to complete the installation. NP1100 10/100Mbps PCI Bus Fast Ethernet Card 7 YML567
Resumo do conteúdo contido na página número 8
Windows® Me 1. As Windows® Me starts the 10/100Mbps Fast Ethernet Adapter will be found and the drivers will be automatically installed. You will need to update the driver to continue. 2. Click on Start – Settings – Control Panel. 3. Open Network and Dial-Up Connections and then open System. 4. Select Device Manager, click on the Realtek RTL8139(A) PCI Fast Ethernet Adaptor under Network Adaptors and click on the Properties button. 5. Select the Driver tab and click on the Update Drive
Resumo do conteúdo contido na página número 9
You may be prompted to insert your Windows®Me CD-ROM to continue with the installation of the network card. 8. Follow the Update Device Driver Wizard to complete the installation and restart your computer when prompted. NP1100 10/100Mbps PCI Bus Fast Ethernet Card 9 YML567 Rev2
Resumo do conteúdo contido na página número 10
Windows® 2000 1. Log into your computer as a user with administrator access. 2. Windows® 2000 will automatically detect the 10/100 PCI Fast Ethernet Network Adapter and install a basic driver that will need to be updated. 3. Click on Start – Settings – Control Panel. 4. Open Network and Dial-Up Connections and then open Local Area Network. 5. Click on Configure and then select the Driver tab. 6. Select Update driver. Choose Display a list of known drivers…. and click on Next >. 10 NP110
Resumo do conteúdo contido na página número 11
7. The Upgrade Device Driver Wizard will appear. To continue, click on Next>. 8. Select Display a list of known drivers for this device so that I can choose a specific driver and click on Next>. 9. Select Have Disk and insert the 110/100Mbps Driver CD-ROM into you computer’s CD-ROM drive. 10. When prompted for a location, enter D:\WIN98 (where “D” is the letter of your CD-ROM drive) and Click on OK. Windows 98 and Windows 2000 use the same driver. The NP1100_4 10/100M Wake_On_ Lan F
Resumo do conteúdo contido na página número 12
11. Click on Next > to start the Device Driver Installation. 12. When the Digital Signature Not Found window is displayed click on Yes to continue. 13. Follow the Update Device Driver Wizard to complete the installation. 12 NP1100 10/100Mbps PCI Bus Fast Ethernet Card YML567 Rev2
Resumo do conteúdo contido na página número 13
Windows® XP 1. Log into your computer as a user with administrator access. 2. Windows® XP will automatically detect the 10/100 PCI Fast Ethernet Network Adapter and install a basic driver that will need to be updated. 3. Click on Start – Settings – Control Panel. 4. Open Network and Dial-Up Connections and then open Local Area Network. 5. Click on Configure and then select the Driver tab. 6. Select Update driver. Choose Display a list of known drivers…. and click on Next>. NP1100 10/100Mbps
Resumo do conteúdo contido na página número 14
7. The Hardware Update Wizard will appear. To continue, click on Next >. 8. Select Install from a list or specific location [Advanced] and click on Next>. 9. Select Don’t search. I will choose the driver to install and click on Next>. 10. Select Have Disk and insert the 110/100Mbps Driver CD-ROM into you computer’s CD-ROM drive. 14 NP1100 10/100Mbps PCI Bus Fast Ethernet Card YML567 Rev2
Resumo do conteúdo contido na página número 15
11. When prompted for a location, enter D:\WINXP (where “D” is the letter of your CD-ROM drive) and Click on OK. The NP1100_4 10/100M Wake_On_ Lan Fast Ethernet card will appear in the Network Adaptor window. Click on Next>. 12. When a window is displayed warning about compatibility testing with Windows XP, click on Continue Anyway. 13. The Hardware Update Wizard will continue Click Finish to complete the installation. NP1100 10/100Mbps PCI Bus Fast Ethernet Card 15 YML567 Rev2
Resumo do conteúdo contido na página número 16
Windows® NT 4 1. Click on Start – Settings – Control Panel. 2. Double click on the Network icon. 3. If this is the first time a Network device is being installed in your computer the system will ask if you wish to install a Network Adapter. Select Yes. If a Network Adapter has previously been installed click on the Adapter tab and choose Add. 4. Select Have Disk, insert the 110/100Mbps Driver CD-ROM into your computer’s CD- ROM drive and click on OK. 5. The Select OEM Option window will displa
Resumo do conteúdo contido na página número 17
Step 4: What’s next? Now that the card and operating system drivers are installed you may need to configure the network protocols depending on your network setup. • If you are running a Windows® 95, 98 or Me peer to peer network then you may need to setup file and printer sharing. • If you are running a Windows® NT or 2000 domain you need to configure the Client for Microsoft Networks to log onto your domain. • If you are running a Windows® 95 peer to peer network with shared Internet access vi
Resumo do conteúdo contido na página número 18
Troubleshooting If you experience any problems with the adapter, first verify that the appropriate driver is loaded, that the proper grade of cable is employed for the network connection, and that the supporting hub is functioning properly. 1. Ascertain that the adapter card is fully and firmly seated in the slot connector. 2. Check the length and rating of connecting cables. 3. Ascertain that the adapter’s PCI slot is not deactivated at the BIOS level. The CMOS Setup utility in PCI computers or
Resumo do conteúdo contido na página número 19
Features • Support 32-bit PCI Local Bus Master high-speed operation of Rev.2.1 and Rev.2.2 Specification • Plug-and-Play installation — simply insert the card into a PC and it will automatically be configured by the PC BIOS • One RJ-45 connector: Auto detection of 10Mbps Ethernet and 100Mbps Fast Ethernet • Supports 10/100Mbps NWay Auto-negotiation operation • Supports Full-duplex mode doubles network data rate to 20Mbps/200Mbps • Supports PCI 2.1, PCI 2.2 ACPI power management and Wake-On-LAN •
Resumo do conteúdo contido na página número 20
Specifications Standards: IEEE 802.3 10BASE-T IEEE802.3u 100BASE-TX ANSI/IEEE 802.3 NWay Auto-negotiation IEEE 802.3x Full Duplex flow control PCI Local Bus Rev.2.1, 2.2 Host interface: 32-bit PCI 2.1, 2.2. Bus Master Wake-On-Lan: Magic Packet LinkChg Microsoft wake-up frame LED indicators: Link, Activity Media Interface: RJ-45 EMI Compatiblity: FCC Class B CE Certification, Class B VCCI Class B Temperture: Storage: -10°C ~ 70°C Operating: 0°C ~ 50°C Humidity: 10% ~90% non-condensi
