Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
OVERVIEW The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal Processor which allow wireless communications on devices such as Mobile phones, Smartphones and PDA’s. It is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding a phone. The Supertooth II will work with any Bluetooth cellular phones available provided that they respect the Bluetooth Protocol. Don't forget: Drive safely and wi
Resumo do conteúdo contido na página número 3
CONTENTS OVERVIEW..................................................................................................... 2 CONTENTS .................................................................................................... 3 GETTING STARTED ..................................................................................... 4 VEHICLE PLACEMENT............................................................................................. 4 CHARGING THE SUPERTOOTH II..............
Resumo do conteúdo contido na página número 4
GETTING STARTED VEHICLE PLACEMENT The optimum place to position the Supertooth II in the vehicle is on the sun visor. The Supertooth II sun visor clip is designed to be reversible to easily transfer the Handsfree Kit in case you change the position of the sun visor. Fix the metal clip of SuperTooth II to the sun visor. Sun Visor Fixing the Clip
Resumo do conteúdo contido na página número 5
CHARGING THE SUPERTOOTH II SuperTooth II can be charged in a car using the SuperTooth II Car Charger or at home using the Wall charger. 1. Connect the charger’s plug into the Charger Input of SUPERTOOTH II. Charge Indicator Status: • Red = Low battery • Steady Green = Fully charged • Alternate Red/Green = indicates charging 2. When fully charged, disconnect the charger. Bluetooth Indicator Status: • Blinking Blue = standby (when Swivel Arm is
Resumo do conteúdo contido na página número 6
BLUETOOTH PAIRING PROFILES IMPORTANT NOTICE!!! You must establish the correct Bluetooth Pairing Mode for your mobile phone before connecting. If your handset is not listed on the next page, look in your phones manual to find the right Bluetooth Profile to use. Alternatively, call the Blueant Customer Support Team or visit www.blueant.com.au for more information. Note: Most newly released phones use the Bluetooth Handsfree Profile.
Resumo do conteúdo contido na página número 7
SUPERTOOTH II COMPATIBILITY Required Profile Phone models Headset Hands free BlackBerry 7100v / 7100g / 7290 / 7250 I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i I-Mate Jam / Pocket Pc / Smartphone 2 / HP IPAQ 6315 / 6365 / 6385 MOTOROLA A1000 / E1000 / A925 / A835 / E398 / MPX220 / MPX / V3 / V80 / V600 / V620 / V525 / V535 Nokia 810 / 3230 / 3650 / 3660 / 6230 / 6255 / 6260 / 6260 / 6310 / 6310i / 6600 / 6630 / 6650 / 6670 / 6820 / 7280 / 7600 / 7610 / 8910 / 8
Resumo do conteúdo contido na página número 8
EXAMPLE PROCEDURE FOR PAIRING TO A MOBILE PHONE • Pairing to your phone is not possible while charging the Supertooth. • First, refer to the Compatibility Table above for suggested pairing modes to determine what pairing mode is best for your phone. • Pairing will create a link or connection between the two Bluetooth devices, SuperTooth II and your phone. • This kit supports either Handsfree or Headset pairing. • The Handsfree and Headset pairing procedures are different
Resumo do conteúdo contido na página número 9
HANDSFREE pairing: (Example) 1. Bring the mobile phone to about 20cm from SuperTooth II. 2. The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTo
Resumo do conteúdo contido na página número 10
HEADSET Pairing: (Example) 1. Bring the mobile phone to about 20cm from the Supertooth II. 2. SuperTooth II is initially off. Turn it on by flipping up the Swivel Arm to 55º position. The Bluetooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and Pick- Up/Hang-Up Button for about 10seconds. A distinctive tone will be heard and The Bluetooth indicator LED will change from blinking blue to alternate blinking red and blue. 4. Pres
Resumo do conteúdo contido na página número 11
Note: If pairing has failed, repeat the procedure. If pairing succeeded, then your SuperTooth II kit is now ready to use. You can now make or answer a call using your kit instead of your phone. Important Remarks: • On some versions of Nokia, Motorola, Sony Ericsson and Sharp phone software, the kit will not connect automatically to the cell phone until you do One press on the Pick- Up/Hang-Up Button of the Supertooth II to connect to the cell phone. • If disconnection problem are enco
Resumo do conteúdo contido na página número 12
MAKING/RECEIVING CALLS ANSWERING A CALL When the phone receives a call, a ring tone is heard on SuperTooth II and at the same time on the telephone (depending on your phone model). 1. Shortly press the Pick-Up/Hang-Up Button to answer the call. 2. When communication is over, press the Pick-Up/Hang-Up Button to terminate the call. MAKING A CALL USING THE SUPERTOOTH II Normal dialing 1. Enter the contact number and press send on the phone. Normally, audio will be on the kit
Resumo do conteúdo contido na página número 13
Redialing (Handsfree profile only) Make a long press on the Pick-Up/Hang-Up Button. Audio will be on the Supertooth II. Audio Transfer Kit to Phone Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone. Phone to Kit For Nokia Phones: Flip up the Swivel Arm from 0º to 55º or 210º positions. This will automatically transfer the audio from phone to kit. For Other Phone
Resumo do conteúdo contido na página número 14
VOLUME LEVELS – Finding The Right Balance 1) The Supertooth II has a very powerful speaker that is designed to boost low level voice signals if required. Use the Volume Control Knob to turn down levels if too much signal is present and distortion or echo occurs. The Supertooth II sounds best when it is loud enough to cut through to be heard without becoming too loud and distorting. 2) In your phone, set up a Sounds Profile with lower ringing volumes and keypad tones and activate when
Resumo do conteúdo contido na página número 15
MANUALS FOR INDIVIDUAL MOBILE If your phone does not appear below, please use a manual for a similar PHONES phone or use the Example Pairing procedure above. Also check the website for newly updated models and also for older outdated models. www.blueant.com.au BLACKBERRY 7100v / 7100g / 7290 / 7250 ............................................... 16 IMATE POCKET PC / JAM .......................................................................... 18 IMATE PDA2k / PDA2K EV-DO...........
Resumo do conteúdo contido na página número 16
BLACKBERRY 7100v / 7100g / 7290 / 7250 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You may need to register your device to download updates. For Blackberry go to www.blackberry.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices.
Resumo do conteúdo contido na página número 17
2. When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Pick-Up/Hang-Up button once on the Supertooth. 3. To terminate the call, press down the Pick-Up/Hang-Up Button. e. MAKING A CALL with the Supertooth on Normal dialing With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most dire
Resumo do conteúdo contido na página número 18
IMATE POCKET PC / JAM Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your Imate to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap . Scroll down to
Resumo do conteúdo contido na página número 19
d. MAKING A CALL with the Handsfree Kit on Normal dialing With your Imate you can make a call using different methods. Please refer to your PC Phone’s User Guide. The most direct method is by using the Phone keypad. 1. Press button to bring up the dialer screen. 2. Tap the number on the keypad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediately on the H
Resumo do conteúdo contido na página número 20
IMATE PDA2k / PDA2K EV-DO Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates. For Imate go to www.clubimate.com a. ACTIVATING THE BLUETOOTH You must activate the Bluetooth feature of your device to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices. 1. Tap the Blue
