Resumo do conteúdo contido na página número 1
Installation Installation Guide
Wireless USB to VGA Adapter
GUW2015V
PART NO. M1063
1
Resumo do conteúdo contido na página número 2
2 3
Resumo do conteúdo contido na página número 3
Table of Contents System Requirements 4 Frequently Asked Questions 25 Important Information 5 Technical Specifications 26 Package Contents 6 Limited Warranty 28 Device Overview 7 Federal Communications Commission 29 (FCC) Statement Wireless USB VGA Software Installation 9 Contact 30 Cable Association with the Wireless USB 12 Enabled PC Connecting Wireless USB VGA Adapter 16 Wireless USB VGA Display Settings 19 Wireless USB VGA Adapter in wired mode 24 2 3
Resumo do conteúdo contido na página número 4
System Requirements ® - Microsoft Windows XP 32-bit (Service Pack 2) ® ® - Microsoft Windows Vista 32/64-bit - Minimum CPU requirement: 2GHz (single core), memory: 1GB* - Wireless USB enabled PC (embedded or via Wireless USB Host Adapter) - USB 2.0 Compliant hardware and system - Display with VGA port (VGA cable not included) * In order to support 720p video, minimum system requirements CPU: 2GHz (single core), RAM: 1GB. While playing 720p video, the system should not be doing other CPU/memory
Resumo do conteúdo contido na página número 5
Important Information Before you get started, please NOTE: Do not place Wireless USB devices under direct sunlight or near high heat emitting devices; Do not place Wireless USB devices near water or wet surfaces to avoid electric hazards; Do not place Wireless USB devices on any moving or unstable surfaces. 4 5
Resumo do conteúdo contido na página número 6
Package Contents 1 x Wireless USB to VGA Adapter (for Monitor/TV/Projector) 1 x USB 2.0 A to mini-B Cable (3 ft.) 1 x Velcro fabric hook-and-loop fastener 1 x Power Adapter (full range) 1 x Quick Start Guide 1 x Registration / Warranty Card 1 x Installation CD (with User Manual) 6 7
Resumo do conteúdo contido na página número 7
Device Overview Wi Wir re eless VGA Adapter less VGA Adapter 1 2 3 4 5 6 7 8 6 7
Resumo do conteúdo contido na página número 8
4. PWR plug Wi Wir re eless VGA Adapter less VGA Adapter a. Power adapter socket 1. VGA : VGA Activity Indicator 5. RESET a. LED is solid when display cable is connected a. Association history can be erased by pressing and b. LED is blinking when data is being transferred holding this button for 10 seconds 6. HOST 2. PWR: Power Indicator a. This button is used to select a different Wireless a. LED is solid when power is applied USB Host Adapter 3. 1 – 2 – 3: Status Indicator 7. USB connector
Resumo do conteúdo contido na página número 9
Wireless USB VGA Software Installation Please always check www.iogear.com for latest drivers. IMPORTANT NOTE: If installing on Windows XP, Service Pack 2 (SP2) is required, verify that this has been installed on your PC before installing the Wireless USB VGA Adapter software. Before installing the GUW2015V software, please make sure that the Wireless USB VGA Adapter is not connected to the computer, and the Wireless USB VGA Adapter is not powered. Step 1 – Insert installation CD into dri
Resumo do conteúdo contido na página número 10
Step 3 – Choose installation method. The next screen will let you choose whether you want to install the latest software from the IOGEAR website or if you want to install the software directly from the installation CD. 10 11
Resumo do conteúdo contido na página número 11
If selecting Option 2: Download latest software installer from the Web, a web browser window will launch directing you to the IOGEAR website where you’ll find the most up-to-date software. Once you download the software, double-click on the .exe file to begin the installation process. If selecting Option 1: Install directly from CD, the installation will start automatically. Important: After the wizard has finished installing the software, reboot your computer if prompted to do so. 10 11
Resumo do conteúdo contido na página número 12
Cable Association with the Wireless USB Enabled PC In order to establish a secure wireless connection between the Wireless USB enabled PC and the Wireless USB VGA Adapter, you will need to go through the cable association process. If you have a removable Wireless USB host adapter, please make sure it is plugged in now. To start, plug the power cable into the Wireless USB VGA adapter. 12 13
Resumo do conteúdo contido na página número 13
Then use the included USB 2.0 A to mini-B cable to connect the Wireless USB VGA Adapter to your PC. 12 13
Resumo do conteúdo contido na página número 14
Windows will detect that a new device has been connected. This will automatically install the necessary drivers and start the Wireless USB Association process. Once the association process has been successfully completed, you will see the wireless connection status showing Association Successful. (Wording may vary depending on which software comes with your Wireless USB Host adapter). Click OK to close the window. After completing the association process, unplug the USB 2.0 A to mini B cable
Resumo do conteúdo contido na página número 15
The host adapter manager utility will display the Wireless USB VGA icon which shows the status link (signal strength ) when connected. If the Wireless USB VGA adapter is not connected, then the Wireless USB VGA icon will be grayed out. Illustration on the right is for your reference. Please note, your host adapter manager utility may vary depending on which host you are running with the Wireless USB VGA adapter. Congratulations, your Wireless USB to VGA Adapter is ready for use. 14 15
Resumo do conteúdo contido na página número 16
Connecting Wireless USB VGA Adapter Please make sure the PC is Wireless USB enabled either with embedded Wireless USB solution or with the Wireless USB Host Adapter plugged in before you connecting the Wireless USB VGA Adapter. Verify that the antenna on the Wireless USB VGA adapter is securely attached and pointed in a vertical position. Connect one end of the VGA cable (not included) to the Wireless USB VGA Adapter, and the other end to your display’s blue VGA port. 16 17
Resumo do conteúdo contido na página número 17
For LCD Monitor/ Flat-Panel TV For Projector 16 17
Resumo do conteúdo contido na página número 18
You may use the included Velcro® fabric hook-and-loop fastener to attach the Wireless USB VGA adapter to your projector or LCD display in order to ensure a good line-of-sight signal with the Wireless USB Host adapter. Change your display’s setting to select VGA as your input device. Please refer to the operating instructions supplied with your display. 18 19
Resumo do conteúdo contido na página número 19
Wireless USB VGA Display Settings By default, the display monitor connected to the Wireless USB VGA adapter will be set to the best resolution and will extend your screen to the right. You may change the screen mode and the operation mode by double clicking on the Monitor icon in the Windows system tray. A menu will appear and you will have the ability to change parameters such as resolution, color quality, mirror mode or extension mode and more. You may also modify your display settings b
Resumo do conteúdo contido na página número 20
Video Mode Configuration as shown above, another is to go to Control Panel, double click on “Display”, then choose By default, your installation will be set with the “Settings” tab. best resolution for your computer and will extend your screen to the right. You may change the Mirror Mode screen mode and the operation mode. Mirror mode duplicates the primary display to Note: If no output is seen on the monitor con- the monitor connected to the Wireless USB VGA nected to the Wireless USB VGA
