Resumo do conteúdo contido na página número 1
PYD6070/PYD1270
6/12 channel 2 Bus
professional
mixing console
proseries
Resumo do conteúdo contido na página número 2
Your PYLE PRO Series Compact Mixing Console is a sophisticated control center, perfect for mixing sound from multiple signal sources such as MICROPHONES, GUITAR, GUITAR AMP,KEYBOARD, SAMPLER, DRUM MACHINE or AUDIO OUTPUT FROM A VCR. This mixer is ruggedly constructed for home or professional use. Wide range of volume controls permit you to adjust sound levels accurately to achieve just the right mix for playing through your speaker system or for recording. Owner’s Manual Table of Contents i Intr
Resumo do conteúdo contido na página número 3
Safety Instructions CAUTION: To reduce the risk of electronic shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire electric shock, do not expose this device to rain and moisture. This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure-voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you
Resumo do conteúdo contido na página número 4
Features and Controls: PYD6070 Mixer MIC1 & MIC2 Balanced XLR Input Connector For connecting a balanced low impedance microphone with XLR type plug. EFX SEND/RETURN Jacks Permit you to either include externally generated effects (such as a digital sampler or synth) IN the mix, or to process the mixed sound (echo reverb, etc.). HEADPHONES Jack Accepts the headphones with 1/4" plug. CTRL ROOM OUT Jacks To connect the mixer to a second receiver or amplifier powering speakers in the control room or
Resumo do conteúdo contido na página número 5
Features and Controls: PYD1270 Mixer EFX SEND/RETURN (LINE 11/12 Input) Jacks Permit you to either include externally generated effects (such as a digital sampler or synth) IN the mix, or to process the mixed sound (echo reverb, etc.). Use two 1/4" (TRS) jacks of LINE 11/12 as effect return path, turn the EFX GAIN of CH 11/12 fully down to avoid undesirable feedback. LINE 1, LINE 2, LINE 3, & LINE 4 BAL or LINE 5/6, LINE 7/8, LINE 9/10, & LINE 11/12 BAL or UNBAL 1/4" UNBAL 1/4" (TRS) Input Jack
Resumo do conteúdo contido na página número 6
INSTALLATION, PYD6070 Mixers 4 – Pyle Pro Mixer PYD6070/1270 Owner’s Manual
Resumo do conteúdo contido na página número 7
INSTALLATION, PYD1270 Mixers Pyle Pro Mixer PYD6070/1270 Owner’s Manual – 5
Resumo do conteúdo contido na página número 8
Mono Input Channel Controls CH1/CH2 For PYD6070 CH1/CH2/CH3/CH4 For PYD1270 MIC EQ (HI/MID/LO) Each mono input channel comes with an XLR ALL the mono input channels has a 3-band balanced microphone input connector and also equalizer, all bands provide up to 15dB of cut and offers a +48V PHANTOM switch to supply power boost, with a centre detent for OFF. The cut-off for condenser microphones. Please mute the frequencies of HI and LO band are 10 kHz and 100 playback/PA loudspeakers system before s
Resumo do conteúdo contido na página número 9
Stereo Input Channel Controls CH5/6, CH7/8, CH9/10 CH3/4 & CH5/6 For PYD6070 & CH11/12 For PYD1270 LINE, LEFT & RIGHT BAL Each stereo input channel comes with two balanced It determines the level of left and right input 1/4" (TRS) line level input jacks. The unbalanced signals relative to each other before both signals devices can also be connected to this input. If are then routed to the MAIN stereo mix bus, only the jack marked "LEFT" is used, the channel allows you to balance the source in th
Resumo do conteúdo contido na página número 10
Main Section Connections and Controls PYD6070 PYD1270 EFX SEND Jack It is a 1/4" unbalanced jack sends out the signals from mix bus to the external effects unit. EFX RETURN Jacks/Control (PYD6070) The EFX RETURN Jacks bring the output of the external effects unit back into the mixer. These jacks can be used instead as additional line level inputs, but any external effects signal will have to be brought back into the mixer via a normal stereo channel, it does allow you to use the channel EQ on th
Resumo do conteúdo contido na página número 11
TAPE IN Jacks The TAPE IN jacks are used to bring the external signal source (Tape Recorder or CD Player) into the mixer. Like the EFX RETURN jacks, they also can be used as a standard stereo line level input, in other words, the line or tape output of an power amplifier with source selection switch can also be connected here for you to listen to additional source. TAPE OUT Jacks The TAPE OUT jacks are used send the MAIN mix signal to your recording device. The output level is adjusted by the MA
Resumo do conteúdo contido na página número 12
Specifications MONO INPUT CHANNELS Mic Input electronically balanced Sensitivity/Impedance ..............................................1.5 mV/600 Ohms Frequency Response .................................................20 Hz to 20 kHz, +/- 3dB Distortion................................................................0.2%, 1 kHz/1.5 mV input S/N Ratio ................................................................60 dB (with A-WTD) Line Input electronically balanced Frequency Response. .......
Resumo do conteúdo contido na página número 13
Please complete warranty card, detach and return Place Stamp Here PYLE PRO Audio, Inc. 1600 63rd Street Brooklyn, NY 11204 Pyle Pro Mixer PYD6070/1270 –11 Owner’s Manual
Resumo do conteúdo contido na página número 14
Limited Warranty All PYLE PRO products are carefully constructed and tested before shipment. R.A.#: _____________ Units purchased in the USA are warranted to be free of defects in material PYLE PRO Service Center and workmanship for two (2) years from the date of purchase. This warranty 1600 63rd Street is limited to the original retail purchaser of the mixer. Brooklyn, NY 11204 You must also include the following items with your return: Should the unit fail due to factory defects in material or
