Resumo do conteúdo contido na página número 1
IMPORTANT NOTICE TO CONSUMERS
This product has been manufactured according to strict specifications and
voltage requirements that are applicable in the country in which it is
intended that this product should be used. If you have purchased this
product via the internet, through mail order, and/or via a telephone sale,
you must verify that this product is intended to be used in the country in
which you reside.
WARNING: Use of this product in any country other than that for which it
is intended co
Resumo do conteúdo contido na página número 2
Precautions THE FCC REGULATION WARNING (for U.S.A.) Location This equipment has been tested and found to comply Using the unit in the following locations can re- with the limits for a Class B digital device, pursuant sult in a malfunction. to Part 15 of the FCC Rules. These limits are designed • In direct sunlight to provide reasonable protection against harmful in- • Locations of extreme temperature or humidity terference in a residential installation. This equipment • Excessively dusty or dirt
Resumo do conteúdo contido na página número 3
COPYRIGHT WARNING Handling of the internal hard disk This professional device is intended only for Do not apply physical shock to this device. In use with works for which you yourself own particular, you must never move this device or the copyright, for which you have received apply physical shock while the power is turned permission from the copyright holder to pub- on. This can cause part or all of the data on disk licly perform, record, broadcast, sell, and du- to be lost, or may damage the h
Resumo do conteúdo contido na página número 4
Contents Introduction -------------------------------------------------------------------- 6 Features -------------------------------------------------------------------------------------- 6 Connection example ---------------------------------------------------------------------- 6 Parts of the MR-1 -------------------------------------------------------------------------- 7 Front and side panels ---------------------------------------------------------------------------------------- 7 Top panel
Resumo do conteúdo contido na página número 5
8. Other general operations ---------------------------------------------------------- 24 Changing the meter peak hold and the counter mode --------------------------------------------- 24 Editing the project/file name ----------------------------------------------------------------------------- 24 Conserving battery power -------------------------------------------------------------------------------- 26 Setting the date and time -----------------------------------------------------------------
Resumo do conteúdo contido na página número 6
Introduction Thank you for purchasing the Korg MR-1 1-bit mobile recorder. In order to take full advantage of your new equipment, please read this manual carefully and use the product as directed. When you've read the manual, keep it safe for future reference. Features The MR-1 is an ultra-high audio quality stereo portable recorder that can record and play back formats such as CD (16-bit/44.1 kHz), DVD audio (24-bit/192 kHz), and SACD (Super Audio CD) (1-bit/2.8 MHz). The MR-1 has a built-in re
Resumo do conteúdo contido na página número 7
Parts of the MR-1 Front and side panels 9 3 10 1 11 2 12 4 7 5 6 8 1. DC 5V connector Connect the included AC adaptor here (also used for charging the battery). 2. USB connector This lets you use a USB cable to connect the MR-1 to your computer. 3. Display The display shows the level meters and counter during recording and playback, and can also show information about the project (→p.13) or file, and parameter settings. 4. Playback/Pause button This button starts recording or playback. During re
Resumo do conteúdo contido na página número 8
9. Power button (with Hold function) This turns the power on/off (shutdown). By sliding this button to the HOLD position, you can prevent accidental operation from occurring when you inadvertently touch the buttons or the P-dial. 10. Menu button This button accesses the menu list (MENU) screen, allowing you to choose the information or parameters that will be displayed. Each time you press this, you will alternate between the level meter screen and the menu screen. You can also use this button t
Resumo do conteúdo contido na página número 9
Screens and operations Level meter screen and menu list (MENU) screen When you power-on the MR-1, the display will show the level meter screen. When the display shows the level meter screen, pressing the menu button will show the menu list (MENU) screen which lets you proceed to various types of settings or informational screen. You'll use the P-dial from this screen to make various settings. When the display shows the menu list (MENU) screen, pressing the menu button will take you back to the l
Resumo do conteúdo contido na página número 10
Basic operation 1. Power and usage The MR-1 contains a rechargeable battery that is convenient for mobile or outdoor use. If you're in a location where AC power is available, you can also use the MR-1 with the included AC adaptor. If the AC adaptor is connected, recharging will begin regardless of whether the power is on or off. Recharging will end automatically when the battery is full. Using the AC adaptor Plug the power cable of the included AC adaptor into an AC outlet. Connect the DC plug o
Resumo do conteúdo contido na página número 11
Remaining battery indication The battery icon in the level meter screen indicates the approximate remaining battery ca- pacity, and whether the battery is being recharged. If you continue playback or recording without using the AC adaptor even though the low battery indication is shown, the shutdown screen will appear automatically when the bat- tery capacity is exhausted, and the power will turn off after several seconds. Battery icon Battery full: Recharging is complete (the battery capacity
Resumo do conteúdo contido na página número 12
2. Connecting your monitor equipment Connect stereo headphones to the headphone jack. Use the volume buttons to adjust the vol- ume. If you're connecting the MR-1 to a monitor system, connect your stereo cable (mini) to the OUTPUT. Connecting headphones won't cut the sound from the output jacks. If you're recording from a mic, we recommend that you monitor through headphones to reduce the risk of acoustic feedback. 3. Turning the power on/off The MR-1 contains an internal hard drive, and is a pr
Resumo do conteúdo contido na página número 13
4. Playing back the demo project The MR-1 contains a high-quality demo project that was recorded in DFF(DSDIFF) format. Here's how to play back this project. What is a project? When you record on the MR-1, two files are created; an audio file and a project file (contain- ing protection data and markers, etc.). These two files are collectively called a "project," and can be operated on the MR-1 as if they were a single audio file. (→p.44 "Hard disk structure and files") Playing back When you've t
Resumo do conteúdo contido na página número 14
5. The level meter screen When you turn on the power, the level meter screen is shown in the display. When the menu list (MENU) screen is shown, you can also access the level meter screen by pressing the menu button. This screen shows information such as the MR-1's operating status and recording/playback format. Protect indicator Recorder status Project/file format Remaining battery indicator Counter Project/file playback location indicator Project/file name (current project/file) Level meter
Resumo do conteúdo contido na página número 15
6. Recording When you record on the MR-1, date and time information is automatically added to the file so that you can manage your projects more easily. If you set the date and time on the MR-1 (→p.28), the date and time will be correct. However, if the rechargeable battery does not have enough power to turn the MR-1 on and you let it sit for a few days, the date and time settings will be reset, so you'll need to set them correctly after recharging the battery. Selecting your recording device In
Resumo do conteúdo contido na página número 16
Recording using the line inputs Set the input switch to LINE. If the level is too low even after you've adjusted the gain (→p.16), set the input switch to MIC. Selecting the recording format Here's how to select the recording format. Each time you record, a new project will be created in the recording format you've selected. The default setting is WAV 16-bit 44.1 kHz. 1. Press the menu button, and in the menu list, use the P-dial to select and confirm "REC MODE." The record mode (REC MODE) setti
Resumo do conteúdo contido na página número 17
2. Press the menu button, and in the menu list, use the P-dial to select and confirm "REC LEVEL." The recording level (REC LEVEL) setting screen will appear. 3. Make sure that the screen indicates Input Gain: (Manual). If this is not shown, turn the P-dial to select the appropriate screen. 4. Use the P-dial to select and confirm InL Gain. The selection icon will change from " " to " ", and the input jack L gain value will be high- lighted. 5. Use the P-dial to select the gain value while you wat
Resumo do conteúdo contido na página número 18
7. Other playback/record operations Selecting and playing back a project/file You can use the rewind and fast-forward buttons or the P-dial to select the project/file that you want to play. However if the playback mode (→p.31) is set to "Current Proj/File", you can not use the rewind/fast-forward buttons to select the project/file. When you turn on the power, the most recently selected project/file will be selected. Selecting a project/file using the rewind & fast-forward buttons During playback
Resumo do conteúdo contido na página número 19
or Push Play/Pause Button 4. Press the play button to begin playing the selected project/file. Alternatively, you can begin playback by using the P-dial to select and confirm "Play Now" in the file edit screen. Using the Auto Gain Control mode The Manual setting is convenient if you are able to predict the audio level of the source you're recording. However, you may want to use the Auto setting if the audio level will be changing significantly, or if you intentionally want to limit the dynamic r
Resumo do conteúdo contido na página número 20
6. When you've finished making settings, press the menu button to return to the record- ing level (REC LEVEL) setting screen. Alternatively, you can return by using the P-dial to select and confirm "<- Back" in the screen. Gain Decrease Threshold Slope Input level Gain Increase Threshold Slope Slope Input level 0s Hold Duration Gain Decrease (Gain Reduction) Threshold (-24.0 ... 0.0 dB, OFF/ Forty-nine steps in 0.5 dB increments: default setting is OFF) When the incoming signal exceeds the speci