Manual do usuário Russound BGD1

Resumo do conteúdo contido na página número 1

BGD1 iBridge Dock
Instruction Manual

Resumo do conteúdo contido na página número 2

Safety Precautions For your safety, please read and follow these precau- ➤ Use the right power. Don’t connect the product tions before installing or using this product: directly to electrical line voltage. Use only the power adapter provided with the product, ➤ Read instructions. Read and understand all the described in the operating instructions, or as applicable instructions before installing or operat- marked on the product. ing the product. ➤ Ground product properly. Make sure the prod- ➤ Re

Resumo do conteúdo contido na página número 3

Product Information The BGD1 also enables program information to Product Overview display on the RNET system’s keypads and touch- The BGD1 iBridge Dock allows you to use an iPod screens. They show playlist, genre, artist, album, ® as a remote source for a Russound RNET or other and song title information from the iPod. multiroom system. Used with a Russound RNET A/V When used with a non-RNET system, the BGD1 only Decoder, it provides either RNET or infrared (IR) con- conveys IR commands from th

Resumo do conteúdo contido na página número 4

Typical Applications Connection to RNET system Multi-Zone Controller CAS44 Power Supply Connection for IR control 4

Resumo do conteúdo contido na página número 5

Installation Connections Setup for RNET Control Note: The BGD1 iBridge Dock requires the use of 1. Connect Decoder to RNET system. With the an RAVD1 RNET A/V Decoder at the audio system, audio system turned off, use an RJ-45 patch cable regardless of which system is used. to connect from either RNET Link jack on the De- coder to an RNET Link jack on the system or an 1. Locate devices. Place the iBridge Dock where RNET source component. Use an RCA patch cable the iPod will be located. Place the R

Resumo do conteúdo contido na página número 6

Installation Setup for IR Control Firmware Update 1. Connect Decoder to audio system. With the From time to time Russound may offer updated audio system turned off, use an RCA patch cable firmware for the BGD1 iBridge Dock. You can to connect from the Decoder’s outputs to a source download updated firmware from the Document input on the audio system. Use an IR link cable or Center at www.russound.com. 1 mono patch cable with ⁄8-inch (3.5 mm) TS connec- 1. Disconnect power. Unplug the power adapt

Resumo do conteúdo contido na página número 7

Operation the display, or select the next or previous song UNO-TS2 Touchscreen Control with the > or < key. You can also press the Shuffle An UNO-TS2 touchscreen with an RNET system soft key to toggle through the iPod’s three shuffle provides the most complete control and feedback mode options. Pressing the Music soft key calls up option for the iPod. The touchscreen allows naviga- the following music request screen: tion through the iPod’s menus to select music by playlist, genre, artist, albu

Resumo do conteúdo contido na página número 8

Supported iPod Models Specifications • iPod mini 4GB 6GB Adapter #3 Switch: 8-position source/function selector • iPod 20GB Adapter #4 RNET A/V connector: 8-pole modular RJ-45 jack • iPod 40GB Adapter #5 OS Update Port connector: 4-pole jack for Programming Cable, Russound part #2500-521065 • iPod with color 20GB 30GB Adapter #6 Power requirement: 12 VDC 1 A (adapter included) • iPod with color 40GB 60GB Adapter #7 Dimensions: 4.72” W x 1.0” H x 2.5” D • iPod nano (adapter included with iPod) (1