Resumo do conteúdo contido na página número 1
Push 2 TV Adapter
(PTV1000)/Intel Wireless
Display User Manual
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134
202-10591-01
January 2010
Resumo do conteúdo contido na página número 2
© 2010 by NETGEAR, Inc. All rights reserved.. Technical Support Please refer to the support information card that shipped with your product. By registering your product at http://www.netgear.com/register, we can provide you with faster expert technical support and timely notices of product and software upgrades. NETGEAR, INC. Support Information Phone: 1-888-NETGEAR, for US & Canada only. For other countries, see your Support information card. E-mail: support@netgear.com North American NETGEA
Resumo do conteúdo contido na página número 3
Regulatory Compliance Information This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority. NOTE: This product's firmware limits operation to only the channels allowed in a particular Region or Country. The
Resumo do conteúdo contido na página número 4
• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two co
Resumo do conteúdo contido na página número 5
Contents Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual About This Manual Conventions, Formats, and Scope ................................................................................... ix Revision History ................................................................................................................. x Chapter 1 Connecting Using Intel Wireless Display ...........................................................................................1-1 Step 1: Ope
Resumo do conteúdo contido na página número 6
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Cords and Cables ....................................................................................................2-1 On/Off Button ...........................................................................................................2-2 Changing the TV Input .............................................................................................2-2 Adapter Encountered a Problem on Startup ...............................
Resumo do conteúdo contido na página número 7
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Global Volume Control ...........................................................................................2-12 Windows Audio Mixer .............................................................................................2-12 Changing the Sound using the Windows Control Panel ........................................2-12 How do I Train My Displays? .............................................................................
Resumo do conteúdo contido na página número 8
About This Manual ® The NETGEAR Push 2 TV Adapter (PTV1000)/Intel® Wireless Display User Manual describes how to install, configure and troubleshoot the Push 2 TV Adapter (PTV1000)/Intel Wireless Display. The information in this manual is intended for readers with intermediate computer and Internet skills. Conventions, Formats, and Scope The conventions, formats, and scope of this manual are described in the following paragraphs: • Typographical Conventions. This manual uses the following typ
Resumo do conteúdo contido na página número 9
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual For more information about network, Internet, firewall, and VPN technologies, see the links to the NETGEAR website in Appendix B, “Related Documents.” Note: Product updates are available on the NETGEAR, Inc. website at http://kbserver.netgear.com/products/PTV1000.asp. Revision History Version Part Number Date Description Number 202-10591-01 1.0 December Original publication 2009 x v1.0, January 2010
Resumo do conteúdo contido na página número 10
Chapter 1 Connecting Intel Wireless Display allows consumers to use their HDTV as a huge, remote screen for their laptop. With Intel Wireless Display, consumers can connect their laptop to their TV and enjoy and share their personal media collections, latest YouTube videos, downloaded or streamed movies, music, or a variety of other Internet content from the comfort of their couch. Intel Wireless Display requires the following key elements: • Push 2 TV adapter. The adapter receives Wi-Fi sig
Resumo do conteúdo contido na página número 11
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Some laptops may have a button or key that starts Intel Wireless Display. This key will be located in different places depending on the brand of laptop. It is usually found on or around the keyboard. The key will contain a small version of the symbol below. Figure 1-1 If this is the initial set up continue to Step 2. If this is the not the initial set up, it is not necessary to repeat Steps 2 and 3. Proceed to Step 4. Step 2: Wind
Resumo do conteúdo contido na página número 12
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Step 4: Scanning for Adapters After opening Intel Wireless Display (or after agreeing to the license), the application begins scanning for available adapters and the status reads Scanning for adapters. Figure 1-2 If the application does not automatically begin scanning, click the Scan for available adapters button. Step 5: Detected Adapter After the scan is complete, any adapters in range will be displayed in the Detected adapters
Resumo do conteúdo contido na página número 13
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual • ID. If the default name has not been changed, use the ID to distinguish multiple entries and find your adapter. • Model. This is the adapter manufacturer and product model name. • Signal. The number of bars represents signal strength. The scale ranges from one bar (weakest signal) to five bars (strongest signal). The bars turn from green to yellow if the signal strength falls below three bars. Step 6: Connecting to the TV To con
Resumo do conteúdo contido na página número 14
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual First Time Connection Procedures This section continues from the end of Step 6 in the Using Intel Wireless Display section. Follow the steps below to complete the initial set up. Changing the TV Input Different TV brands have various methods of changing the TV input. Five of the most common processes are covered here. If these options do not cover your TV, consult your TV owner’s manual for additional help. • Some TV remote contro
Resumo do conteúdo contido na página número 15
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Step 1: Entering a Security Code When the Enter security code screen appears, type the security code shown on the TV. Figure 1-3 The security code numbers shown above are for example only! The numbers on your TV will be different. Type the numbers from your TV into the field displayed on your laptop screen: Figure 1-4 On your TV, click the Continue button after typing the security code. To stop the set up process click Cancel. For
Resumo do conteúdo contido na página número 16
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Step 2: Security Configuration Successful The Security configuration successful TV message indicates a correct security code entry. Step 3: Adapter is Connected After the laptop connects to the adapter, the TV shows Connected. Please wait. This message appears for only a few seconds. If the TV reads Connected. Please wait for more than 1 minute, the connection attempt failed. For help, see the “Common Solutions to Many Issues” on
Resumo do conteúdo contido na página número 17
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Step 5: Finishing the Initial Set Up Process After the Connected. Please wait message disappears, the laptop screen and TV screen are the same. Congratulations! You have successfully completed the set up process! Click the Register link to register your adapter and receive product support and software updates. When you are done registering your product, click the Finish button to exit the set up process. If the laptop and TV are n
Resumo do conteúdo contido na página número 18
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual Exiting To exit Intel Wireless Display, click the Disconnect button, wait until the adapter disconnects, and click the Close Window button (red x) in the upper right corner of application window. If you click the Close Window button while still connected, you are asked if you want to close the connection. Click Yes to exit or No to cancel exiting. To not view this screen again, select the Don’t ask me next time check box. If you
Resumo do conteúdo contido na página número 19
Chapter 2 Troubleshooting Look through the Troubleshooting contents for a topic that comes closest to describing your problem. If you are unable to resolve the problem after reading through the Troubleshooting topics, search the FAQ topics. For additional help, visit http://kbserver.netgear.com/products/ PTV1000.asp. Initial Set Up Problems Cords and Cables The power cord connects to the rear panel of the adapter. Plug the other end of the power cord into an electrical outlet. The HDMI cable
Resumo do conteúdo contido na página número 20
Push 2 TV Adapter (PTV1000)/Intel Wireless Display User Manual white, and red). Connect each cord and cable into their correct inputs on the TV. (See your TV owner’s manual if needed.) Once plugged in, make sure the cords and cables are pushed all the way into their correct input positions. Using the composite video cable (the yellow input on the Audio/Video cable) may cause the TV image to be off-centered. Consult the TV owner’s manual for image adjustment. On/Off Button The On/Off button is
