Resumo do conteúdo contido na página número 1
High Speed High Speed
ADSL2+ Modem ADSL2+ Modem
Connect your PC for high-speed
Internet access
Belkin Tech Support Belkin Ltd.
US: 877-736-5771 4 Pioneer Avenue
310-898-1100 ext. 2263 Tuggerah Business Park
Europe: 00 800 223 55 460 Tuggerah NSW Australia 2259
Australia: 1800 235 546 +61 (0) 2 4372 8600
New Zealand: 0800 235 546 +61 (0) 2 4372 8603 fax
Singapore: 800 616 1790
Belkin B.V.
Belkin Corporation Boeing Avenue 333
501 West Walnut Street 1119 PH Schiphol-Rijk, The Netherlands
Los A
Resumo do conteúdo contido na página número 2
section Table of Contents Introduction Thank you for purchasing the Belkin ADSL 2+ Modem. In minutes 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 you will be able to connect to the Internet. The following is a list Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 of features that make your Modem an ideal solution for your home 2. Make sure you have the following. . . . . . . . .
Resumo do conteúdo contido na página número 3
section Introduction Make sure you have the following 1 Package Contents NAT IP Address Sharing • ADSL Modem 2 Your Modem employs Network Address Translation (NAT) to share the • RJ11 Telephone Cable single IP address assigned to you by your Internet Service Provider while • RJ45 Ethernet Networking Cable 3 saving the cost of adding additional IP addresses to your Internet service • Power Adapter account. • User Manual CD 4 SPI Firewall System Requirements Your Modem is equipped with a firewa
Resumo do conteúdo contido na página número 4
section Knowing Your Modem Knowing Your Modem 1 The Modem is designed to be placed on a desktop. All of the cables When a computer is properly connected to the USB port on the rear exit from the rear of the Modem for better organization and utility. The of the Modem, the LED will light. Solid GREEN means a computer is LED indicators are easily visible on the front of the Modem to provide connected and the drivers are installed. When information is being sent 2 you with information about networ
Resumo do conteúdo contido na página número 5
section Knowing your Modem Connecting your Modem 1 Connecting your Computer via Ethernet 1. Power off your computer and Modem 2 2. Connect your computer to the Ethernet port on the rear of the Modem by using an Ethernet networking cable (an Ethernet 3 network cable is supplied). 3. Power on your computer and Modem. 6. ADSL 4 This port is for connection to your ADSL line. Connect your ADSL line to this port. Connecting your Computer via USB (Windows ME or later) 5 1. Locate a USB cabl
Resumo do conteúdo contido na página número 6
section Connecting your Modem Connecting your Modem 1 6. Select “Search 9. Once the installer has for the best driver finished, click finish. 2 for your device. (Recommended).” and click “Next” 3 4 5 6 7 7. Place a tick next to “CD-ROM drive” and click “Next” Connecting your ADSL Line Connection for the Modem to the ADSL line varies by country and region. Typically it involves line filter or a line filter with built-in splitter to allow simultaneous use of ADSL service and telephone
Resumo do conteúdo contido na página número 7
section Connecting your Modem Setting up your Computer 1 In order for your computer to properly communicate with your Modem, telephone line and you are using an ADSL line filter with built-in you will need to change your computer’s “TCP/IP Ethernet” settings to splitter, connect the splitter to the telephone wall jack providing “Obtain an IP address automatically/Using DHCP”. This is normally the 2 ADSL service. Then, connect the telephone cord from the ADSL default setting in most home com
Resumo do conteúdo contido na página número 8
section Setting up your Computer Setting up your Computer 1 Your network adapter(s) are now configured for use with the Modem. Restart the computer. When the computer restarts, your network adapter(s) are now configured for use with the Modem. 2 Manually Configuring Network Adapters in Mac OS up to 9.x Manually Configuring Network Adapters in In order for your computer to properly communicate with your Modem, you will Windows 98SE or Me 3 need to change your Mac computer’s TCP/IP settings to
Resumo do conteúdo contido na página número 9
section Setting up your Computer Setting up your Computer 1 Your network adapter(s) are now configured for use with the Modem. 2 Recommended Web Browser Settings In most cases, you will not need to make any changes to your web 3 Netscape Navigator 4.0 browser’s settings. If you are having trouble accessing the Internet or the or Higher advanced web-based user interface, then change your browser’s settings 4 to the recommended settings in this section. 1. Start Netscape, click on “Ed
Resumo do conteúdo contido na página número 10
section Setting up your Computer Manually Configuring your Modem 1 Understanding the Web-Based User Interface connection to the Internet” and then click OK. The Modem can be configured by any browser such as Internet 2 Explorer 4.0 or above. Using the web management interface, you may configure the Modem and view statistics to monitor network activity. MAC OS – Safari Type “10.1.1.1” (do not type in anything else such as “http://” or 3 “www”) in your browser’s address bar. Then press the
Resumo do conteúdo contido na página número 11
section Manually Configuring your Modem Manually Configuring your Modem 1 Making Configuration Changes Advanced Setup Configurable parameters have a dialog box or a drop-down list. Once Clicking the Home icon 2 a configuration change has been made on a page, most times you will returns you to the home need to click the “SAVE SETTINGS” or “NEXT” button at the bottom page. The Main Menu links of the page to enable the new setting. Some options may also have an are used to navigate to 3 “ADD”
Resumo do conteúdo contido na página número 12
section Manually Configuring your Modem Manually Configuring your Modem 1 Menu Description System Settings Time Settings 2 Set the time zone and time Menu Description server for the Modem. System Sets the local time zone, the password for 3 This information is used administrator access, the IP address of a PC that for log entries and client will be allowed to manage the Modem remotely, access control. 4 and the IP address of a Domain Name Server. Check “Enable Automatic WAN Specifies t
Resumo do conteúdo contido na página número 13
section Manually Configuring your Modem Manually Configuring your Modem 1 Remote Management WAN By default, management Specify the WAN (Wide Area Network) connection parameters provided 2 access is only available by your Internet Service Provider (ISP). to users on your local network. However, you can 3 ATM PVC also manage the Modem from a remote host by The Modem uses 4 checking the Enabled ATM (Asynchronous check box, and if you Transfer Mode) as its wish you can set a HOST WAN i
Resumo do conteúdo contido na página número 14
section Manually Configuring your Modem Manually Configuring your Modem 1 ATM Interface Parameter Description Clicking on the ATM VC Protocol • Disable: Disables the connection. 2 brings up the following • 1483 Bridging: Bridging is a standardized layer screen. The Modem 2 technology. It is typically used in corporate uses ATM as its WAN 3 networks to extend the physical reach of a single interface. Protocols LAN segment and increase the number of stations including 1483 Routing, o
Resumo do conteúdo contido na página número 15
section Manually Configuring your Modem Manually Configuring your Modem 1 Clone MAC Address Encapsulation Shows the packet encapsulation type. Clicking on the Clone Packet encapsulation specifies how to handle 2 MAC Address brings up multiple protocols at the ATM transport layer. the following screen. • VC-MUX: Point-to-Point Protocol over ATM Virtual 3 Some ISPs may require Circuit Multiplexer (null encapsulation) allows only that you register your one protocol running per virtual ci
Resumo do conteúdo contido na página número 16
section Manually Configuring your Modem Manually Configuring your Modem 1 DHCP Client List The DHCP Clients List Parameter Description 2 displays the IP Address, IP Address The IP address of the Modem. Host Name and MAC Address of each client 3 IP Subnet Mask The subnet mask of the Modem. that has requested an IP DHCP Server To dynamically assign an IP address to client PCs, address since the last enable the DHCP (Dynamic Host Configuration 4 reboot of the Modem. Protocol) Server. Check
Resumo do conteúdo contido na página número 17
section Manually Configuring your Modem Manually Configuring your Modem 1 Address Mapping Special Applications Use Address Mapping to Some applications, such 2 allow a limited number of as Internet gaming, public IP addresses to be video conferencing, translated into multiple Internet telephony and 3 private IP addresses for others, require multiple use on the internal LAN connections. These 4 network. This also hides applications cannot work the internal network for with Network Address
Resumo do conteúdo contido na página número 18
section Manually Configuring your Modem Manually Configuring your Modem 1 NAT Mapping Table NAT Mapping Table 2 displays the current NAPT (Network Address Port Translation) address 3 mappings. The NAT address mappings are 4 listed 20 lines per page, click the control buttons to move forwards and 5 backwards. As the NAT mapping is dynamic, a Refresh button is provided 6 to refresh the NAT Mapping Table with the 7 most up-to-date values. Parameter Description The content of the N
Resumo do conteúdo contido na página número 19
section Manually Configuring your Modem Manually Configuring your Modem 1 Click Add or Edit to display the following page and add a new static RIP Parameter route to the list. The device supports Routing Information Protocol (RIP) v1 and v2 to 2 dynamically exchange routing information with adjacent Modems. 3 4 5 6 7 Parameter Description Index Displays the number of the route. Parameter Description Network Enter the IP address of the remote computer for Address which to set a static rou
Resumo do conteúdo contido na página número 20
section Manually Configuring your Modem Manually Configuring your Modem 1 Routing Table Authentication None: No authentication. Required Password: A password authentication key is 2 included in the packet. If this does not match what is expected, the packet will be discarded. 3 This method provides very little security as it is possible to learn the authentication key by watching RIP packets. 4 MD5: An algorithm that is used to verify data integrity through the creation of a 128-bitmess
