Resumo do conteúdo contido na página número 1
10. QUALITY CERTIFICATE
LRB 4000CI is suited for usage.
Production date ____________________________
Serial number _____________________________
Operation Manual
Device performance:
Actual data Measured data
Reflective object, m
Non-reflective object, m
Azimuth, °
Elevation, °
RS-232 interface Pass
Quality Inspector signature___________________
Purchase date _____________________________
Salesman ________________________________
Resumo do conteúdo contido na página número 2
9. CUSTOMER SUPPORT IMPORTANT INFORMATION Read prior to activation Should you experience any difficulties with your Newcon OPTIK product, consult the enclosed manual. If the problem You have just purchased a complicated electronic device. To remains unresolved, contact our customer support department at operate it properly, please read this manual carefully. Here are (416) 663-6963 or Toll free at 1-877-398-6666. Our operating some common precautions that must be noted.
Resumo do conteúdo contido na página número 3
8. WARRANTY Features of the LRB 4000CI Laser Rangefinder Binocular NEWCON OPTIK warrants this product against defects in • Latest digital circuitry allows targeting through most types material and workmanship for one year from the date of the of glass original date of consumer's purchase, but no more than 18 • First, last or the most reflective target acquisition months from the date of manufacturing. If your Newcon product • Meters/Yards/Mils/Degrees/KMH/MPH display proves to b
Resumo do conteúdo contido na página número 4
7. TROUBLESHOOTING CONTENTS The range-measuring mode does not work. 1. Brief description Press the Action button again. 2. Appearance of the device Check that the battery is installed properly. Check the charge of 3. Supplied accessories the battery. Replace it if it is weak. 4. Technical characteristics 5. Operation instructions How can I clear last reading before making next measurement? 5.1. Preparing the device for operation Direct the unit’s LCD reticle at the new targe
Resumo do conteúdo contido na página número 5
6. STORAGE AND MAINTENANCE INSTRUCTIONS. CAREFULLY READ ALL THE INSTRUCTIONS BEFORE USING! Precautions: LRB is a sophisticated precision optical instrument equipped with electronics. Therefore, it should be handled with FAILURE TO OBEY THE INSTRUCTIONS WILL VOID due care. THE WARRANTY! • Keep your device away from direct sunlight, impacts, dust, moisture, and sudden changes of temperatures. o • Do not keep the device at temperatures higher than 65 C o 1. BRIEF DESCRIPTION (
Resumo do conteúdo contido na página número 6
2. APPEARANCE OF THE DEVICE 5.6. Computer interconnectivity The unit is equipped with standard RS-232 interface. The data is transmitted as ASCII code with fixed baud rate of 9600 bit/sec. 5.7. Test modes 4 Mode 16 is designated to test the display. When you choose this mode all segments and indicators will flash during 8 6 1 seconds. This time should be enough for extensive display testing. 7 Mode 17 calibrates the digital compass. If the System was exposed to a stron
Resumo do conteúdo contido na página número 7
There are four statistical qualifications of the reflected signal: • NO TARGET REFLECTION – when a steady reflected signal isn’t received. Numerical display shows four dashes at 1 the distance displaying area; 1 • TARGET REFLECTION LOW – when the number of steady received reflected signals is just enough to make 9 acceptable conclusion about the measured distance; • TARGET REFLECTION MED - when the number of 10 steady received reflected signals is in medium range and enough to
Resumo do conteúdo contido na página número 8
7 4. TECHNICAL CHARACTERISTICS 1. Optics Magnification, x 7 Objective Lens, mm 50 Exit Pupil Diameter, mm 7.1 Field of View 5 ° Type of Coating Fully multi-coated optics Interpupilary distance, mm 58-72 Diopter adjustment range ±4 Axial Resolution, ” 6 Image tilt, maximum - Horizontal 60” - Vertical 30” 2. Range Finder Type Class 1, eye safe, 905nm Measuring Range, m 20 – 4,000 Accuracy ± 1m ± 0.1% 'Last Target' measurement Yes Meters/Yards display Yes Last 10 readi
Resumo do conteúdo contido na página número 9
M/° - units of angular measurement: mils or degrees 5.4. Gating distance selection Shape of the reticle: cross shape or rectangular shape (2). You can exclude all targets, which are closer than the preset distance. This is useful when you aim your target through bushes rEC1 - recall function. Upon pressing the Action button (6) (fig. or wires, or you are not interested in targets closer than a certain 1) the Display will sequentially show results of last 10 measurements, starting from the
Resumo do conteúdo contido na página número 10
5. OPERATION INSTRUCTIONS 5.1. Preparing the device for operation. • Open battery compartment cover (10) (Fig. 2). Liquid Crystal Display (LCD) • Insert one 9V battery (sold separately) into the battery 7 compartment observing correct polarity. • Close the battery compartment cover (10), tighten the screw. 6 1 After changing the battery, it is recommended to run the cLr (CLEAR) mode and Compass Calibration mode (refer mode 8 selection procedure). 5 5.2. Measuring p
Resumo do conteúdo contido na página número 11
override reticle type and target selection with the sub selection code. For example, Standard 1 mode implies cross reticle. If you choose rectangular reticle (sub selection code 10), you change the reticle shape and leave all other parameters of this mode intact. If then you choose Standard1 again, the reticle will turn back crosshair. The last set mode overwrites all features that it controls. The third standard mode is assigned to Code 8. It determines measurement units and features
Resumo do conteúdo contido na página número 12
The mode selection logic allows choosing the nearest (‘first’), operating buttons and after 8 seconds enters the passive zero the farthest (‘last’) or the most reflective (‘auto’) target. Besides, power state. you can exclude all targets that are closer than the predefined Note: If you set the gating distance larger than any accessible distance (gating distance selection, see below). target, you will be unable to obtain any result even if the target reflection is high (see below). 5.3. M
Resumo do conteúdo contido na página número 13
Fig.4 Mode switching trek A Select Code 11 M Last this mode Go to next Target mode Mode Screen display A Select Code 12 M First this mode Go to next Target mode A Select Code 13 M Auto A Auto this mode Select M Meter 1) Standard 1 , , , Degree Degree Go to next this mode Target Target Go to next mode mode A Code 14 M Auto Select A Meter this mode KMH Select M Mills Mills 1) Standard 2 Meter Go to next this mode , , , Target mode Go to next mode A Select Code 15 M M A Select this mode Yard MPH G
