Manual do usuário Rolls PROMIX IV MX124

Resumo do conteúdo contido na página número 1

SETTING THE LOW CUT AND PHANTOM POWER SWITCHES
On the left side are the Phantom Power and Low-Cut switches.
Phantom
Low Cut
Phantom
Low Cut
Phantom
Low Cut
Phantom
Low Cut
Phan Pwr ON=dwn
Low Cut ON=up
As shown here, under each number is a P indicating Phantom Power, and an L which
indicates Low-Cut.When the P switch is DOWN, the phantom power is ON, when it is UP,
MX124
the phantom power is OFF. When the L switch is UP, the low-cut is ON, when it is DOWN,
the low-cut is OFF.
LIMITED WARRANTY

Resumo do conteúdo contido na página número 2

INTRODUCTION Phone/Aux: 1/4” and 1/8” (3.5mm) TRS jacks which may be connected to a pair of head- Thank you for your purchase of the MX124 ProMix IV. This unit is designed and manufac- phones for personal monitoring, or to a stereo unbalanced input of a signal processor, tured to mix four microphones together and send their combined signals out stereo trans- amplifier, or camera. former-balanced XLR outputs, or front panel 1/4” and 1/8” stereo outputs. The individually Clip LED: Indicates that