Resumo do conteúdo contido na página número 1
Models
20” Push
& )
&
&
&
! '( $#
!"# $ !# %##
&
Resumo do conteúdo contido na página número 2
MURRAY, INC. One Year Limited Warranty Murray, Inc. warrants to the original purchaser that this unit shall be free from defects in ma- terial and workmanship under normal use and service for a period of One (1) Years from the date of purchase; however, this warranty does not cover engines, accessories (such as snow blowers, snow blades, grass baggers and plows), transmissions, batteries and Nor- mal Wear Parts (except as noted below) or transaxles as the companies that manufacture these items f
Resumo do conteúdo contido na página número 3
OWNER’S INFORMATION This instruction book is written for a person with some mechanical ability. Like most service books, not all the steps are described. Steps on how to loosen or tighten fasteners are steps anyone can follow with some mechanical ability. Read and follow these instructions before you use the unit. Know your product: If you understand the unit and how the unit operates, you will get the best performance. As you read this manual, compare the illustrations to the unit. Learn the lo
Resumo do conteúdo contido na página número 4
IMPORTANT Safe Operation Practices for Walk–Behind Mowers. This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. I. General Operation tion which can cause drowsiness or affect your ability to operate this machine safely. 1. Read, understand, and follow all instruc- 15. Never operate mower in wet grass. Always tions on the machine and in the manual(s). be sure of your footi
Resumo do conteúdo contido na página número 5
IMPORTANT DO NOT: nect the spark plug wire, and keep the wire away from the plug to prevent accidental Do not mow near drop–offs, ditches, or em- starting. Always wear eye protection when bankments. The operator could lose footing you make adjustments or repairs. or balance. 4. Keep all nuts and bolts, especially blade at- Do not mow excessively steep slopes. tachment bolts, tight and keep equipment in Do not mow on wet grass. Reduced footing good condition. could cause slipping. 5. Never tamper
Resumo do conteúdo contido na página número 6
SAFE MOWING GUIDE Every person who uses power equipment gency. Learn how to cut and how to keep con- must learn the difference between proper and trol of the mower at all times. improper use, safe and unsafe mowing prac- Many mowers are started manually. When us- tices. Read the next few pages carefully. ing a pull start or rope start, place your feet They can help you learn. Too often the mow- firmly and away from the blade. Hold the rope er user is inexperienced, not properly in- handle secure
Resumo do conteúdo contido na página número 7
SAFE MOWING GUIDE bruises, or even put out an eye. Often the per- improve the performance, help the engine stay son hurt by a thrown object is a bystander such cooler, extend the life of moving parts, and as a child, another family member or a neigh- minimize the danger of fire. People get burned bor. Keep people and pets completely away working with and around their mowers for oth- from the mowing area. Direct the mower’s dis- er reasons than fire and explosions. It takes charge away from areas
Resumo do conteúdo contido na página número 8
SAFE MOWING GUIDE Use only original equipment or approved sub- in the rain is no fun and it is dangerous. Always stitutions as service parts. If you need profes- seek shelter in an electrical storm. In extreme- sional service, select a shop that is an ly dry mowing conditions, your safety glasses can serve a dual purpose by protecting your Authorized Service Center for your brand of mower. If you plan to service the unit yourself, eyes from dust and thrown objects, also a dust follow directions
Resumo do conteúdo contido na página número 9
SAFE MOWING GUIDE While mowing, if you hit a foreign object, stop position when mowing and bagging. When the engine. Remove the spark plug wire. Care- bagging, slower ground speed will provide the fully and thoroughly inspect the mower for best results. damage. Make necessary repairs before re- Change the mowing pattern slightly each time starting. If the unit starts to vibrate abnormally, you cut. If you always cut the same way, the stop the engine immediately and check for the grass will devel
Resumo do conteúdo contido na página número 10
STEPS TO FOLLOW BEFORE MOWING Be sure to dress correctly. Wear hard shoes, not sandals or tennis shoes. Examine the blade. A blade that is bent, cracked, or damaged must be replaced with a factory replacement blade. Fill the fuel tank outside. Clean off spilled fuel. Read and follow the Owner’s Manual, the instructions with the engine, and the instructions with any attachments. Owner’s Manual instructions are for your safety and the safety of others. Exhaust fumes are dangerous. Sta
Resumo do conteúdo contido na página número 11
ASSEMBLY Read and follow the assembly and adjustment NOTE: Torque is measured in foot pounds instructions for your mower. All fasteners are (metric N.m). This measurement describes in the parts bag. Do not discard any parts or how tight a nut or bolt must be. The torque material until the unit is assembled. is measured with a torque wrench. WARNING: Before doing any TOOLS REQUIRED assembly or maintenance to the 1 Pliers mower, remove the wire from the 2 Adjustable open end wrenches 1 Blade type
Resumo do conteúdo contido na página número 12
ASSEMBLY * % # $ " * * ' (" Bolt WARNING: The chute deflector 1x121 is necessary for your safety and protection. Do not operate the mower if the chute deflector is Washer missing or is not installed cor- 17x37 rectly. Nut 15x116 1. Attach the chute deflector to the mower housing with a bolt, washer, and nut (Figure 1). Make sure the fasteners are tight. Chute Deflector Figure 1 * % # $ " * *#'" 1. Put the ends of the lower handle into the handle slots (Figure 2). 2. A
Resumo do conteúdo contido na página número 13
ASSEMBLY HOW TO ASSEMBLE THE CONTROLS TO THE HANDLE Two types of handles are shown in Figure 4. with Tecumseh engine, make sure the stop The engine on your model will determine lever bracket is on the right side of the han- which type of handle is on your model. Type A dle. is for models with Briggs & Stratton engines. Type B is for models with Tecumseh engines. 1. Mount the ends of the engine stop lever into the top holes of the handle. Note: On models with Briggs & Stratton en- gines, make sur
Resumo do conteúdo contido na página número 14
ASSEMBLY 3. Attach the engine stop cable to the en- Briggs gine. Models with Briggs & Stratton en- Engine gines are shown in Figure 5. Models with Tecumseh engines are shown in Figure 6. 4. Make sure the engine stop cable moves freely. If the cable does not move freely, re- peat the above steps. Engine Stop Cable CAUTION: A cable that is bent or damaged will not work correctly. Before you use the unit, replace a damaged cable. 5. Attach the cable to the handle with the cable fastener(s) as sh
Resumo do conteúdo contido na página número 15
ASSEMBLY HOW TO ASSEMBLE THE Mower Housing WHEELS WITH AXLE BOLTS 1. To change the height of cut, change the position of the axle bolts on the mower housing. Make sure you assemble each axle bolt in the same hole position so that the mower will cut level. Hub Cap 2. Assemble the wheel to the mower hous- Flange Nut ing with an axle bolt, washer, and flange 15x68 nut (Figure 8). To tighten, turn the axle Washer bolt. Do not turn the flange nut. 845 Axle Bolt 3. If your model has hub caps, push t
Resumo do conteúdo contido na página número 16
OPERATION ENGINE STOP LEVER WARNING: Always use a safety gasoline container. Do not smoke Release the engine stop lever and the engine when adding gasoline to the fuel and the blade will automatically stop. To run tank. When inside an enclosure, the engine, hold the engine stop lever in the Operating position (Figure 9). do not add gasoline. Before you add gasoline, stop the engine and Before you start the engine, operate the en- gine stop lever several times. Make sure the let the engine cool f
Resumo do conteúdo contido na página número 17
MAINTENANCE Grass and other debris can keep the mower ENGINE MAINTENANCE from working correctly. After you mow, clean Use the following maintenance section to keep the mower housing as follows. your unit in good operating condition. All the 1. Stop the engine. maintenance information for the engine is in 2. Disconnect the wire from the spark plug. the ”Engine Instruction Book”. Before you start 3. Clean the top and the bottom of the mower the engine, read this book. housing. WARNING: Before you
Resumo do conteúdo contido na página número 18
MAINTENANCE 6. Mount the blade with the curved edges to- BLADE SERVICE ward the housing. If the blade is upside WARNING: Before you inspect down, the blade will not cut correctly and the blade or the blade adapter, can cause an accident. disconnect the wire to the spark 7. Fasten the blade with the original wash- plug. If the blade hits an object, ers and bolt. Make sure the outside rims stop the engine. Disconnect the of the Belleville washers are toward the wire to the spark plug. Check the bl
Resumo do conteúdo contido na página número 19
MAINTENANCE CHECK THE LEVEL OF CUT Test the unit in a small area. If the height of cut Blade is not level or if the cut grass is not discharged, the cause can be: (1) the blade is bent or dam- aged, (2) the blade is not sharp, (3) a worn blade, (4) or a broken blade adapter. Before you use the unit, correct the problem. File Blade is balanced when parallel to the ground. Ground Figure 14 5. Make sure the blade is balanced. Use a screwdriver and hold the blade parallel to the ground a
Resumo do conteúdo contido na página número 20
TROUBLE SHOOTING CHART The Engine will not start. 1. Make sure the fuel tank is filled with clean gasoline. Do not use old gasoline. 2. On a cold engine, push the primer button (optional on some models). For the number of times required to push the primer button, see the engine manufacturer’s instructions. 3. Make sure the wire for the spark plug is connected to the spark plug. 4. Adjust the Carburetor. See the “Engine Instruction Book”. 5. There is too much gasoline in the engine cylinder. Remo
