Resumo do conteúdo contido na página número 1
TM
MOW’N MACHINE
FZ23B
FZ28K
Serial Number 1177489 & Up
MAN0875
(Rev. 3/7/2012)
OPERATOR'S MANUAL
Resumo do conteúdo contido na página número 2
TO THE DEALER: ® Assembly and proper installation of this product is the responsibility of the Woods dealer. Read manual instructions and safety rules. Make sure all items on the Dealer’s Pre-Delivery and Delivery Check Lists in the Operator’s Manual are completed before releasing equipment to the owner. The dealer must complete the online Product Registration form at the Woods Dealer Website which certifies that all Dealer Check List items have been completed. Dealers can register all Woods pro
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SAFETY RULES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 SAFETY DECALS . . . . . . . . . . . . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 4
SPECIFICATIONS Engine: FZ23B. . . . . Briggs & Stratton Vanguard V-Twin, 4-Cycle, Air Cooled FZ28K. . . . . . . . . . . . . . . . . . . . . . . . .Kawasaki, 4-Cycle, Air Cooled Horsepower: FZ23B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 HP FZ28K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 HP Fuel Type:. . . . . . . . . . . Gasoline (minimum 85 octane, unleaded recommended) Standard Tire Size: Front . .
Resumo do conteúdo contido na página número 5
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! equipment for eyes, hair, hands, hearing, and head; Safety is a primary concern in the design and and respirator or filter mask where appropriate. manufacture of our products. Unfortunately, our Make sure attachment is properly secured, efforts to provide safe equipment can be wiped adjusted, and in good operating condition. out by an operator’s single careless act. In addition to the design and configuration of Make sure the drive
Resumo do conteúdo contido na página número 6
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Keep hands, feet, hair, and clothing away from (Safety Rules continued from previous page) equipment while engine is running. Stay clear of all Remove gas-powered equipment from the truck moving parts. or trailer and refuel on the ground. If this is not When improperly operated, power unit can roll possible, then refuel such equipment on a trailer over or upset. Use of rollover protective structure with a portable container, rathe
Resumo do conteúdo contido na página número 7
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Watch for hidden hazards on the terrain during Do not modify or alter or permit anyone else to operation. modify or alter the equipment or any of its compo- nents in any way. Watch for traffic when operating near or cross- ing roadways. Do not work on mower in tilt-up position unless lock-up mechanism is in good condition. Replace if Uneven terrain could overturn the machine. damaged. Do not try to stabilize the machine by putt
Resumo do conteúdo contido na página número 8
SAFETY RULES ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! (Safety Rules continued from previous page) Never store the machine or fuel container near an open flame, spark or pilot light such as on a Battery posts, terminals, wiring insulation, and water heater or other appliance. related accessories contain lead and lead com- pounds, chemicals known to the State of California Do not run engine indoors. Exhaust gases con- to cause cancer and birth defects or other repro- tain carbon monoxi
Resumo do conteúdo contido na página número 9
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! 1 – 72407 2 – 72404 3 – SERIAL NUMBER PLATE MODEL NO. SERIAL NO. Woods Equipment Company Oregon, Illinois, U.S.A. (Safety Decals continued on next page) MAN0875 (2/8/2011) Safety 9
Resumo do conteúdo contido na página número 10
SAFETY & INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately If Damaged! (Safety Decals continued from previous page) 4 – 72408 8 - 07754100 07754100 9 - 72801 5 – 72406 6 – 70376 7 – 72405 BE CAREFUL! Use a clean, damp cloth to clean safety decals. Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter through very small scratches or under edges of decals causing them to peel or come off. Replacement safety decals ca
Resumo do conteúdo contido na página número 11
OPERATION The operator is responsible for the safe operation of toggle switch to lower the deck and cycle through to the this Mow’n Machine. The operator must be properly tilt position. Release switch when deck reaches maxi- trained. Operators should be familiar with the power mum tilt position. To lower the deck, push and hold tog- unit, all attachments that will be used, and all safety gle switch until it cycles to the desired cutting height. practices before starting operation. Read the safet
Resumo do conteúdo contido na página número 12
The PTO control must be in the “OFF” position and the STARTING MOWER OR ATTACHMENT steering handles in the NEUTRAL position before unit can be started. A safety switch behind the operator’s seat will cause the engine to stop if the operator leaves the seat with Make sure people and objects are clear of the PTO or steering handles engaged. The engine will attachment and discharge area before engaging also stop if the steering handles are moved from NEU- PTO. TRAL while the parking brake
Resumo do conteúdo contido na página número 13
the steering handles are moved, the faster the machine will move. Steering Handle Positions Watch for hidden hazards on the terrain during operation. NOTICE Practice steering maneuvers at half throttle. ■ If you become confused during operation, return both handles to the center NEUTRAL posi- STEERING HANDLE OPERATION tion and the power unit will stop. Forward Both handles forward Reverse Both handles rearward Moving steering levers rapidly from forward to Gentle Right Left
Resumo do conteúdo contido na página número 14
The weight transfer is designed to place an additional STOPPING ENGINE load on the drive wheels, providing additional traction. 1. Attach mower to power unit and set to desired CAUTION cutting height. Remove key and store in a secure location to 2. Torque bolt on both sides to 35 lbs-in. prevent unauthorized persons from operating equipment. NOTE: Counterweight is needed to provide adequate stability. Refer to the chart to determine your power 1. Place steering handles in the NEUTRAL position u
Resumo do conteúdo contido na página número 15
___ Do not allow riders. OWNER PRE-OPERATION CHECK LIST (OWNER'S RESPONSIBILITY) ___ Inspect area and remove stones, branches or other hard objects that might be thrown, causing ___ Review and follow all safety rules and safety injury or damage. decal instructions on pages 5 through 10. ___ Check that all safety decals are installed and in ___ Clean air intake screen. Check air cleaner; ser- good condition. Replace if damaged. vice if necessary. ___ Check to make sure all shields and guards are
Resumo do conteúdo contido na página número 16
OWNER SERVICE Change Engine Oil NOTICE Before performing any service or maintenance, ■ Use care to prevent hot oil from contacting lower attachment to ground, turn off power unit bare skin. engine, remove key, and disconnect battery 1. Run engine to allow oil to become hot. This will ground cable (negative -). ensure that most foreign materials are in suspension and will be flushed out with the oil. Before working underneath, read manual instructions, securely block up, and check sta
Resumo do conteúdo contido na página número 17
Figure 5. Lubrication Diagram TAILWHEEL MAINTENANCE Once a year, disassemble tailwheel assembly and inspect roller bearings: 1. Remove dust cap (2) from top of tailwheel assembly (1). 2. Remove cotter pin (3) and slotted hex nut (4). 3. Remove wheel fork (10), bearing cones (6) and remaining hardware from assembly. 4. Inspect bearing cones (6) and bearing cups (7) for wear and replace if necessary. Replace seals and washers as necessary. 1. Tailwheel assembly 5. Pack bearing cones (6) with a go
Resumo do conteúdo contido na página número 18
3. Remove case drain hose fitting from bottom of HYDROSTATIC TRANSMISSION SERVICE reservoir, located outside of power unit frame. NOTICE Allow reservoir to completely drain. ■ Keep transmission oil clean. When adding fluid 4. Remove automotive type filter (Figure 7) by turning take precautions to prevent dirt and other foreign counter-clockwise. material from entering the system. 5. Replace filter by turning until gasket is seated; then NOTE: Check fluid level every 8 hours of operation. turn a
Resumo do conteúdo contido na página número 19
3. Inspect battery to make sure tie-down is tight and CLEANING battery is secured in place. After Each Use 4. Inspect battery case for cracks or leaks; replace ● Remove large debris such as clumps of dirt, grass, battery if necessary. crop residue, etc. from machine. 5. Test battery with hydrometer; recharge battery if ● Inspect machine and replace worn or damaged less than 75% charge is indicated. parts. 6. Add water if necessary. ● Replace any safety decals that are missing or not readable. BU
Resumo do conteúdo contido na página número 20
DEALER SERVICE The information in this section is written for dealer ser- 4. Place steering handles in the neutral position vice personnel. The repair described here requires (pivoted outward) and start engine. special skills and tools. If your shop is not properly 5. If drive wheels turn, turn rod out or in until wheel equipped or your mechanics are not properly trained in stops. this type of repair, you may be time and money ahead 6. Tighten jam nut. to replace complete assemblies. 7. Repeat s
