Resumo do conteúdo contido na página número 1
Safety Instructions & Operator’s Manual for
LAWN TRACTOR
HYDROSTATIC DRIVE
SERIES I
MODELS
LT180H33IBV
LT180H38IBV
MODEL NUMBER EXPLANATION
LT 180 H 38 I B V
MODEL DESIGNATION
ENGINE HP * ENGINE TYPE
DRIVE SYSTEM TYPE ENGINE MODEL
CUTTING WIDTH SERIES DESIGNATION
LT – Lawn Tractor Model Designation 33 – 33” Cutting Width Mower
180 – 18.0 HP Engine Horse Power 38 – 38” Cutting Width Mower
H – Hydrostatic Transmission I – Series Designation
B –
Resumo do conteúdo contido na página número 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: This powerful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply with the following SAFETY instructions could result in serious injury or death to the operator or other persons. The owner of the machine must understand these instructions and must allow only persons who understand these instructions to operate machine. Each person operating the machine must be of sound mind
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS PREPARATION OPERATION (Continued From Previous Page) 1. Mount and dismount machine from left side. 6. Check the area to be mowed and remove all objects Keep clear of discharge opening at all times. such as toys, wire, rocks, limbs and other objects 2. Start engine from operator's seat, if possible. that could cause injury if thrown by blade or Make sure blades are OFF and parking brake is interfere with mowing. set. 7. Keep people and pets out of mo
Resumo do conteúdo contido na página número 4
IMPORTANT SAFETY INSTRUCTIONS TOWING MAINTENANCE 1. Tow only with a machine that has a hitch (Continued From Previous Column) 15. Maintain or replace safety and instruction labels designed for towing. DO NOT attach towed as necessary. equipment except at the hitch point. 16. Use only genuine SNAPPER replacement parts 2. Follow the manufacturer’s recommendation for to assure that original standards are weight limits for towed equipment and towing maintained. on slopes. 3. DO
Resumo do conteúdo contido na página número 5
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......... 2 - 4 SECTION 4 - ADJUSTMENTS & REPAIR............................18-33 TABLE OF CONTENTS .........................................5 Engine Adjustments & Repair ......................... 18 Mower Deck & Component Adjustments ....... 18 SECTION 1 - FAMILIARIZATION ..........................6 Blade Brake Adjustment .................................. 18 Components .......................................................6 33” D
Resumo do conteúdo contido na página número 6
Section 1 - FAMILIARIZATION CONTROL PANEL PARK BRAKE CHOKE FAST LEVER SLOW CLUTCH/BRAKE DOWN PEDAL KEY CUTTING HEIGHT OPERATOR’S ENGINE SPEED ADJUSTMENT LEVER SEAT CONTROL STEERING SEAT WHEEL ADJUSTMENT KNOB DASHBOARD CONTROLS SPEED CONTROL FUEL TANK LEVER (UNDER HOOD) BATTERY (UNDER SEAT) HOOD OVERRIDE LEVER HEADLIGHTS BLADE ENGAGEMENT LEVER DISCHARGE DEFLECTOR ENGINE MOWING D
Resumo do conteúdo contido na página número 7
Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECKLIST Make the following checks and perform service as FUEL TANK required before each start-up. 2.1.1. Check tires and add air as needed to bring pressure to 12 P.S.I. in front tires and 12 P.S.I. in rear tires. 2.1.2. Check guards, deflectors and covers to make sure all are in place and securely tightened. If guards are missing or damaged, replace BEFORE using mower. TIGHTEN CAP AFTER 2.1.3. Check
Resumo do conteúdo contido na página número 8
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION 5. Choke engine for cold starting by moving engine 2.3.1. STARTING ENGINE speed control to "CHOKE" position. Little or no choking will be needed when restarting a warm 1. Take a comfortable position in seat of machine, look around to make sure that the area you are going engine. Insert key in switch. Turn key to "START" position to crank engine and hold until engine starts, to mow is clear of people, children and pets. Take not
Resumo do conteúdo contido na página número 9
Section 2 - OPERATING INSTRUCTIONS 2.3 STARTING & OPERATION (continued) 2.4 STOPPING ENGINE, BLADE, & WHEEL DRIVE 2.3.2. STARTING WHEEL DRIVE 2.4.1. STOPPING ENGINE 1. Shift speed control lever to neutral. 1. Stop engine by turning key to the "OFF" 2. Start engine. Refer to Section “STARTING position. See Figure 2.9. ENGINE”. 3. Release clutch/brake pedal. 4. Slowly shift speed control lever forward for forward motion or to the rear for reverse motion. See RUN OFF START Figure 2.
Resumo do conteúdo contido na página número 10
Section 2 - OPERATING INSTRUCTIONS 2.4 STOPPING 2.4.5. RELEASING PARK BRAKE 2.4.3. STOPPING MOWER BLADE 1. Fully depress clutch/brake pedal. Move park brake 1. Stop mower blade by moving blade engagement lever down to the "OFF" position. See Figure 2.11. lever “DOWN” to release park brake. Release clutch/brake pedal. See Figure 2.13. PARK BRAKE BLADE LEVER CLUTCH/BRAKE ENGAGEMENT PEDAL LEVER OFF FULLY DEPRESS FIGURE 2.11 CLUTCH/BRAKE PEDAL WARNING Once blade
Resumo do conteúdo contido na página número 11
Section 2 - OPERATING INSTRUCTIONS 2.6. ROLLING TRACTOR WITH ENGINE OFF 2.6.1. Rolling Hydro Models 1. With engine "OFF", move to rear of tractor. 2. Pull the roll release control all the way out to disengage the hydro transmission. See Figure 2.15. WARNING PULL ROLL RELEASE DO NOT disengage the hydro transmission and coast CONTROL ALL THE WAY OUT TO DISENGAGE down slopes. DO NOT use Roll Release Control to HYDRO TRANSMISSION disengage the hydro transmissi
Resumo do conteúdo contido na página número 12
Section 2 - OPERATING INSTRUCTIONS 2.7. REVERSE LOCKOUT MECHANISM 2.7.1. Reverse Lockout Mechanism Override 1. Stop machine. Stop blades. Data indicates that tragic back-over accidents occur 2. Depress and hold Override Lever. each year. These accidents usually involve 3. Raise blade engagement lever to "ON". unsupervised children. Many times these children have 4. Release override lever. been given rides on the machine and have been trained to view this potentially dangerous piece
Resumo do conteúdo contido na página número 13
Section 3 - MAINTENANCE 3.1 INTRODUCTION 4. Check blade for straightness. Refer to Section To retain the quality of the Tractor, use genuine “ADJUSTING MOWER BLADE”. SNAPPER replacement parts only. Contact a local 5. Check torque of blade mounting bolts. Torque to: SNAPPER dealer for parts and service assistance. For 33” deck – 30 to 40 ft. lbs. See Figure 3.2. the correct part or information for a particular Tractor, 38” deck – 70 to 80 ft. lbs. See Figure 3.3. always me
Resumo do conteúdo contido na página número 14
Section 3 - MAINTENANCE 3.2.3. CHECK MOWER BLADE (Continued) 2. Change air filter. Pull up and rotate the air cleaner latch to remove cleaner cover. See Figure 3.5. IMPORTANT: When cover is removed, you are viewing the carburetor side of the air filter, which will appear clean. Remove filter and pre-cleaner for inspection. AIR CLEANER LATCH TORQUE 38” BLADES TO 70 TO 80 FT. LBS. FIGURE 3.3 3.2.4. CHECK 33" DECK DRIVE BELT 1. With engine "OFF", m
Resumo do conteúdo contido na página número 15
Section 3 - MAINTENANCE 3.3.2. MOWER COMPONENTS 3. Clutch/Brake Pivot 1. Check deck drive belt for proper tension. Refer The clutch/brake pivot is located on the left hand underside of the tractor and is lubricated with one to Section “CHECK DECK DRIVE BELT”. 2. Check blades for sharpness, wear, damage and shot of general purpose grease. See Figure 3.8. torque. Refer to Section “MOWER BLADE REPLACEMENT”. CLUTCH/BRAKE 3. Check mower deck for proper levelness. Refer PIVOT LUBRICATION
Resumo do conteúdo contido na página número 16
Section 3 - MAINTENANCE 6. Steering Drag Link Lubricate both ends of steering drag link with a small amount of SAE30 oil. See Figure 3.10. LUBRICATE COMPONENTS ON UNDERSIDE OF TRACTOR DRAG LINK LUBRICATION POINT BLADE ENGAGEMENT LEVER FIGURE 3.10 FIGURE 3.12 3.3.4. TRACTOR LUBRICATION (Continued From Previous Page) 9. Park Brake Lever 7. Steering Tie Rod Using general purpose grease, lubricate the park Lubricate both ends of steering tie rod with a small brake lev
Resumo do conteúdo contido na página número 17
Section 3 - MAINTENANCE 3.4 SERVICE - ANNUALLY 3.4.3. SPARK PLUG 3.4.2. FUEL FILTER Remove and replace engine spark plug. Refer to engine owner's manual for correct replacement plug 1. Service fuel filter as instructed below, on COLD ENGINE ONLY! and gap specifications. 3.4.4. HYDROSTATIC TRANSMISSION OIL NOTE: It may be necessary to drain the fuel tank before removing fuel filter to prevent spillage of gasoline. The hydrostatic transmission does not require maintenance. If any pro
Resumo do conteúdo contido na página número 18
Section 4 - ADJUSTMENT & REPAIR WARNING DO NOT attempt any adjustments, maintenance or service with the engine or blade running. STOP blade. STOP engine. Set brake. Remove key. Remove spark plug wire from spark plug and secure wire away from spark plug. Engine and components can be extremely hot. Avoid burns by allowing engine and components sufficient time to cool. 4.1 ENGINE ADJUSTMENTS & REPAIR Refer to the engine owner's manual for those adjustments and/or repairs that can be
Resumo do conteúdo contido na página número 19
Section 4 - ADJUSTMENT & REPAIR 8. (33" Deck) To adjust tension, remove extension rod WARNING mounting bolt and nut. See Figure 4.4. DO NOT attempt any adjustments, maintenance or 9. Move extension rod to next hole towards rear of service with the engine or blade running. STOP blade. deck and secure with mounting bolt and nut. STOP engine. Set brake. Remove key. Remove spark 10. Measure extension spring with blade engagement plug wire from spark plug and secure wire away from lever
Resumo do conteúdo contido na página número 20
Section 4 - ADJUSTMENT & REPAIR 4.2.4. ADJUSTING MOWER BLADE – 33” DECK 4.2.5. 33" DECK LEVEL ADJUSTMENT (SIDE TO SIDE) (Continued from previous page) NOTE: Adjust tire pressure, 12 P.S.I. front and rear, before adjusting deck. 1. Move tractor to a firm, level surface. 2. Turn engine "OFF". Remove key. 3. Place a piece of angle iron under center rear of deck. 4. Remove hair pins and washers securing rear of deck MEASURE THE DISTANCE to sector plates. See Figure 4.7. BETWEEN DECK L
