Resumo do conteúdo contido na página número 1
Operator´smanual
Z4818BIA/968999250
Please read the operator’s manual carefully and make sure you
understand the instructions before using the machine.
English
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
OPERATOR’S MANUAL RIDER Z4818 Maintenance ......................................................... 35 Contents Maintenance Schedule...................................... 35 Contents...................................................................1 Battery............................................................... 37 Introduction .............................................................3 Ignition System.................................................. 38 Congratulations...............
Resumo do conteúdo contido na página número 4
WARNING! Failure to follow cautious operating practices can result in serious injury to the operator or other persons. The owner must understand these instructions, and must allow only trained persons who understand these instructions to operate the mower. Each person operating the mower must be of sound mind and body and must not be under the influence of any mind altering substance. WARNING! Engine exhaust, some of its constituents, and certain vehicle componets contain or emit chemicals k
Resumo do conteúdo contido na página número 5
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvarna ride-on mower. This machine is built for the greatest efficiency and rapid mowing primarily of large areas. Controls in one place and a hydrostatic transmission regulated by steering controls also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the lifespan of your machine and even increase its resale va
Resumo do conteúdo contido na página número 6
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follo
Resumo do conteúdo contido na página número 7
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxxxxxx xxxx xxxxxxxx xxx x Xxxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to n
Resumo do conteúdo contido na página número 8
SYMBOLS AND DECALS Keepasafe Shut off engine Use on No Read distance from & remove key slopes no passengers Operator´s the machine. before greater Manual. performing any than 10°. maintenance or repair work. Whole Severing Do not open Careful Careful going body of fingers or remove backing up, forward, exposure &toes. safety watch for watch for to thrown shields while other people. other people. objects. engine is running. Moving sharp blades under cover English-6
Resumo do conteúdo contido na página número 9
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. Learn how to use the machine and its controls safely and learn how to stop quickly. Also learn to recognize the safety decals. O
Resumo do conteúdo contido na página número 10
SAFETY INSTRUCTIONS Shut down the blades when not mowing. WARNING! Be careful when mowing around fixed Engine exhaust and certain objects, so that the blades do not hit vehicle components contain them. Never drive over foreign objects. or emit chemicals considered Only use the machine in daylight or in to cause cancer, birth defects, other well-lit conditions. Keep the or other reproductive system machine a safe distance from holes or damage. The engine exhaust other irregularities in the
Resumo do conteúdo contido na página número 11
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if you feel unsure, do not mow the slope. Do as follows Remove obstacles such as stones, tree branches, etc. Watch out for and avoid driving over furrows, holes, and bumps. On uneven terrain, the machine can t
Resumo do conteúdo contido na página número 12
SAFETY INSTRUCTIONS Children Serious accidents may occur if you fail to be on guard for children in the vicinity of the machine. Children are often attracted to the machine and mowing work. Never assume that children will stay put where you last saw them. Keepchildrenawayfromthe mowing area and under close supervision by another adult. Keep an eye out and shut off the machine if children enter the work area. 8011-517 Before and during a reversing maneuver, Never allow children to operate
Resumo do conteúdo contido na página número 13
SAFETY INSTRUCTIONS Maintenance WARNING! The engine must not be started when the driver’s floor plate or any protective plate for the mower deck’s drive belt is removed. Stop the engine. Prevent the engine from starting by removing the spark plug cables from the spark plugs or by removing the ignition key before making any adjustments or performing maintenance. Never fill the fuel tank indoors. Fuel and fuel fumes are poisonous and extremely flammable. Be especially cautious when handling
Resumo do conteúdo contido na página número 14
SAFETY INSTRUCTIONS Acid in the eyes can cause blindness, contact a doctor immediately. Be careful when servicing the battery. Explosive gases form in the battery. Never perform maintenance on the battery when smoking or near open flames or sparks. The battery can explode and cause serious injury/damage. Ensure that nuts and bolts, especially the fastening bolts for the blade attachments, are properly tightened, torqued and that the equipment is in good condition. 6003-009 Do not modify
Resumo do conteúdo contido na página número 15
SAFETY INSTRUCTIONS Stop and inspect the equipment if you run over or into anything. If necessary, Use protective glasses for make repairs before starting. maintenance work. Never make adjustments with the engine running. The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer. The blades are sharp and can cause cuts and gashes. Wrap the blades or use protective gloves when handling them. Check the parking brake’s functionality
Resumo do conteúdo contido na página número 16
SAFETY INSTRUCTIONS Customer responsibilities Read and observe the safety rules. Follow a regular schedule in maintaining, caring for and using your mower. Follow the instructions under "Maintenance” and "Storage” sections of this owner’s manual. WARNING! This mower is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, bush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting app
Resumo do conteúdo contido na página número 17
CONTROLS Controls This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with a Briggs and Stratton four-stroke V-Twin engine developing 18 horse power. Transmission from the engine is made via two belt-driven hydraulic gears, one for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed. 8011-710 Zero Turn Rider 8011-769 Locations of the controls Control Locations Page Page 1. Tension relief le
Resumo do conteúdo contido na página número 18
CONTROLS 1. Tension Relief Lever Used to release the belt tension on the deck belt for ease in removing or replacing the belt. CZ20 Tension relief lever IMPORTANT INFORMATION The machine must be absolutely stand still when applying the parking brake. 2. Parking Brake The parking brake is found on the left of the machine. Pull the lever backward to activate the brake and forward to release it. 8011-711 Parking brake not activated English-16
Resumo do conteúdo contido na página número 19
CONTROLS 3. Motion Control Levers The machine’s speed and direction are continuously variable using the two steering controls. The steering controls can be moved forward or backward about a neutral position. Furthermore, there is a neutral position, which is locked if the steering controls are moved outward. When both controls are in the neutral position (N), the machine stands still. By moving both controls an equal amount forward or backward, the machine moves in a 8011-789 straight
Resumo do conteúdo contido na página número 20
CONTROLS 4. Fuel Shut Off Valve The fuel shut off valve is located under the fuel tank. The valve has two positions; ON and OFF. 8011-712 Fuel shut off valve in OFF position 5. Seat adjustment knobs The seat can be adjusted lengthways. When making adjustments, loosen the four knobs under the seat pan, after which the seat can be moved backward or forward. CZ-1 Lengthways adjustment English-18
