Resumo do conteúdo contido na página número 1
Party Pub
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
Model Number / No. de Modelo: CB350S
BEER DISPENSER
DISPENSADOR DE CERVEZA
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
La sección en español empieza en la página 19
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications
without notice.
Avanti Products, A Division of the Mackle Co., Inc.
P.O
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS Important Safety Instructions and Appliance Safety 3 Important Safeguides 4 Help Us Help You … 5 Parts and Features 6 Installation Instructions 7 Before Using Your Appliance 7 Electrical Connection 8 Installation of Your Appliance 9 Preparing the Keg 9 - 11 Setting up the Keg 11 Setting up the Gas Cartridge 11 – 12 Adjusting the Gas Pressure 12 Operating Your Appliance 13 Setting the Temperature 13 Interior LED Light 13
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your appliance, follow WARNING these basic precautions: • Read all instructions before using the appliance. • Never allow children to operate, play with, or crawl inside the appliance. • Never clean the appliance parts with flammable fluids. The fumes can create a fire hazard or explosion. • Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of
Resumo do conteúdo contido na página número 4
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: • Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. • Replace all panels before ope
Resumo do conteúdo contido na página número 5
HELP US HELP YOU... Read this guide carefully. Write down the model and serial numbers. It is intended to help you operate and maintain You'll find them on a plate located on the rear your new unit properly. outside wall of the unit. Keep it handy to answer your questions. Please write these numbers here: If you don't understand something or you need more assistance, please call: ____________________________________ Date of Purchase Avanti Customer Service 800-220
Resumo do conteúdo contido na página número 6
PARTS & FEATURES 1 Safety Latch 9 Regulator with pressure gauge and cartridge holder assembly 2 See –thru window 10 Keg Piercing assembly 3 Leveling Legs 11 Keg support rail 4 Upper Door Hinge 12 Glass mug tray 5 Pressure gauge window 13 Cleansing cylinder (Not Shown) 6 Tap with pull handle 14 Keg Seal (Total 2) (Not Shown) 7 Temperature Control Panel 15 Replacement Hoses (Total 2) (Not Shown) 8 Drip Tray 16 Tap Plug (Total 1) (Not Shown) 6
Resumo do conteúdo contido na página número 7
INSTALLATION INSTRUCTIONS Before Using Your Appliance • Remove the exterior and interior packing. • Check to be sure you have all of the accessories. • Clean the interior surface with lukewarm water using a soft cloth. • Prior to operating the appliance, read the following instructions: • Do not use the appliance if the power supply cord is damaged. Should it be the case, it must be replaced by a qualified person so as to avoid any shock hazard. • This appliance is not designed for y
Resumo do conteúdo contido na página número 8
ELECTRICAL CONNECTION Warning Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Avanti Products service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumst
Resumo do conteúdo contido na página número 9
Installation of Your Appliance • Take the appliance out of its packaging (do not allow children to play with plastic parts, as this can cause a possible choking hazard). • Place your Party Pub on a steady and horizontal flat surface, leaving at least 5 inches / 10 cm on either side so as to allow correct ventilation of the appliance. • Set the drip tray into the notches provided. • Install the dispenser handle and the dispensing head to the door, making sure that both end- pieces perfe
Resumo do conteúdo contido na página número 10
IMPORTANT: Before piercing the plug on the top of the keg, you must always follow the instructions marked on the keg to eliminate the excess gas and ensure that the keg has rested long enough to avoid foam coming out through the tap faucet. a) Heineken keg: When using the Heineken type keg: Remove the spout that is supplied with the keg. Remove the adaptor from the keg. Using the Heineken keg adapter supplied with your Mini-Pub attach it to the dispensing end of the spout. Insert the e
Resumo do conteúdo contido na página número 11
CAUTION: allow the beer to rest before piercing the plug so as to avoid beer spray. Piercing pin: Prior to installing the piercing pin in the keg, place it under running water so that it is wet at the time of insertion. Fit the bit vertically and drive it vigorously into the keg. Then, secure the dispensing head on the keg, pull the locking latch outwards then release it. A click should be heard, indicating that the dispensing head is correctly secured on the keg. IMPORTANT: Once t
Resumo do conteúdo contido na página número 12
• Connect the hose by inserting it into the hose outlet (to check that the hose is correctly connected, try to remove it by slightly pulling it. Resistance indicates that the hose is correctly connected. In order to disconnect the hose, push in the blue plastic collar on the hose outlet while pulling the hose). See below. • Place the face of the regulator into the opening on the door and hold it in place with the latch provided. • Close the door. b) 255 gram (9 oz) cy
Resumo do conteúdo contido na página número 13
OPERATING YOUR PARTY PUB Setting the Temperature You will need to set the temperature to best suit your taste. The temperature can be set from 38º to 43ºF (3° to 6°C), using the temperature selectors ( and ) located below the temperature display. You can select temperature display setting from Fahrenheit to Celsius degree by pushing appear in blue color in the temperature display window. Interior LED Light The Party Pub is also equipped with an interior LED light, that
Resumo do conteúdo contido na página número 14
• Unlock the dispensing head from the keg by pushing the catch and remove the piercing pin from the keg. b) To clean the beer lines • Fill the cleaning bottle supplied with your appliance half-way with lukewarm water. As required, you may add a bit of detergent. Push it firmly onto the dispensing kit. • Reconnect the hoses on the dispensing kit as indicated in section "Setting up the keg". • Open the valve of the pressure gauge and set the pressure to 1.0 bar for 5 s
Resumo do conteúdo contido na página número 15
DRAUGHT BEER TROUBLE GUIDE CLOUDY BEER When beer in glass appears hazy, and not clear. Causes Corrections 1) 1) • Over chilling beverage cooler and/or • Excessive low temperatures may cause hazy, beverage lines. cloudy beer, particularly when beer lies in cold coil for long periods of time. Make certain that lines are thoroughly cleaned, and then raise temperature slightly. 2) 2) • General conditions causing cloudy • See wild beer corrections #2, #5, #6, and #7, and beer. fla
Resumo do conteúdo contido na página número 16
LOOSE FOAM Causes Corrections • Large soap-like bubbles (sometimes • This is generally a Flat Beer condition: the Causes called fish eyes). Foam settles quickly. and corrections for Flat Beer should be followed. WILD BEER Beer, when drawn, is all foam, or too much foam, and not enough liquid beer. Cause Corrections 1) 1) • Improper drawing beer into glass. • Open faucet quickly and completely. • Check and find the correct distance to hold glass from faucet when drawing. Pr
Resumo do conteúdo contido na página número 17
Staple your sales receipt here. Proof of YOUR Avanti Products WARRANTY original purchase date is needed to obtain service under warranty. WHAT IS COVERED LIMITED ONE-YEAR WARRANTY LIMITED SECOND THROUGH For one year from the date of purchase by the original owner, Avanti Products will, at its FIFTH YEAR WARRANTY option, repair or replace any part of the unit, For the second through the fifth year from date which proves to be defective in material or of original purchase, Avanti P
Resumo do conteúdo contido na página número 18
SERVICE FOR YOUR APPLIANCE We are proud of our customer service organization and the network of professional service technicians that provide service on your Avanti refrigerators. With the purchase of your Avanti unit, you can be confident that if you ever need additional information or assistance, the Avanti Products Customer Service team will be here for you. Just call us toll-free. AVANTI PRODUCTS CUSTOMER SERVICES Product Information Whatever your questions are about our products,
Resumo do conteúdo contido na página número 19
INSTRUCCIONES DE SEGURIDAD ADVERTENCIA: Para reducir el riesgo de incendio, choque eléctrico, o daños cuando use electrodomésticos, siga estas precauciones: Lea todas las instrucciones antes de usar su Dispensador de Cerveza. Nunca limpie el Dispensador de Cerveza con líquidos inflamables. Los vapores pueden causar fuego o explosión. No almacene o use gasolina o cualquier otro líquido o material inflamable cerca de este o cualquier otro electrodoméstico. Los vapores pueden causar fue
Resumo do conteúdo contido na página número 20
GUIAS DE SEGURIDAD Antes de usar el Dispensador de Cerveza, posiciónelo correctamente e instálelo como se describe mas adelante; por favor lea el manual cuidadosamente. Para reducir el riesgo de fuego, choque eléctrico o daños cuando use el Dispensador de Cerveza, siga precauciones básicas, incluyendo las siguientes: PELIGRO • Enchufe en un tomacorriente de 3 orificios, no remueva la tercera punta, no use un adaptador ni use un cable de extensión. • Reemplace todos los paneles antes d
