Resumo do conteúdo contido na página número 1
Operator′s manual
Rider 318
Rider 320 AWD
Please read the operator’s manual carefully and make sure yo u
understand the instructions before using the machine.
E E E En n n ng g g glllliiiis s s sh h h h
Resumo do conteúdo contido na página número 2
CONTENTS Fitting the cutting head ................................................. 22 Contents Removing the cutting unit ............................................. 23 CONTENTS Checking and adjustment of the cutting unit’s ground Contents ...................................................................... 2 pressure ....................................................................... 23 Service journal Checking the cutting unit’s parall
Resumo do conteúdo contido na página número 3
Service journal 13 Tell customer about: Pre-delivery service Needs and benefits of following the service 1 Charge the battery for 4 hours at max. 3 amp. schedule. 2 Fit steering wheel, seat and any optional Servicing and the influence of this journal on the equipment. second-hand value of the machine. 3 Check and adjust tyre pressure (60 Kpa, 0.6 bar, Range of applications for BioClip. 9 PSI). Complete proof of sale etc. 4 Adjust cutting unit: Adjust lift springs (effective weig
Resumo do conteúdo contido na página número 4
INTRODUCTION Dear Customer, Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a patented articulated steering. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine. This operator’s manual is a valuable document. By following its instructions (on ope
Resumo do conteúdo contido na página número 5
KEY TO SYMBOLS Symbols Noise emission to the environment These symbols are on the machine and in the instructions. according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label. WARNING! Careless or incorrect use can result in serious or fatal injury to the operator or others. Clutch in Please read the operator’s manual carefully and make s
Resumo do conteúdo contido na página número 6
KEY TO SYMBOLS Starting instructions Switch off the engine and take off the ignition cable before repairs or maintenance Check the engine’s oil level Check transmission oil level Lift up the cutting unit Apply the parking brake. If the engine is cold, use the choke Release the parking brake before driving 6 – English
Resumo do conteúdo contido na página número 7
WHAT IS WHAT? 12 3 4 6 7 8 5 14 15 11 12 13 9 10 Location of the controls 1 Speed limiter for driving forward 9 Parking brake 2 Speed limiter for reversing 10 Lock button for parking brake 3 Lifting lever for the cutting unit 11 Seat adjustment. 4 Cutting height adjustment lever 12 Lever to disengage the driving front axle, Rider 320 AWD 5 Ignition lock 13 Fuel cap 6 Throttle control/choke control 14 Battery 7 Counter 15 Lever to disengage the drive, Rider 318. Lever to disengage the driving
Resumo do conteúdo contido na página número 8
SAFETY INSTRUCTIONS • Stop the engine and prevent the engine from being Safety instructions started until you have cleaned the outlet channel. These instructions are for your safety. Read them carefully. • Look out for the ejector and do not direct it towards anyone. Insure your Rider • Stop the engine and prevent it from starting before you • Check the insurance coverage for your new Rider. clean the cutting unit. • Contact your insurance company. • Remember that the driver is responsible fo
Resumo do conteúdo contido na página número 9
SAFETY INSTRUCTIONS • Never allow children or other persons not trained in the This is what you do use of the machine to use or service it. Local laws may • Remove obstacles such as stones, branches, etc. regulate the age of the user. • Mow upwards and downwards, not sideways. WARNING! You must use approved personal • Do not use the machine on ground that slopes more than protective equipment whenever you use the 10°. ! machine. Personal protective equipment • Take extra care if any attach
Resumo do conteúdo contido na página número 10
SAFETY INSTRUCTIONS • Follow the manufacturer’s recommendations regarding • Petrol and petrol fumes are poisonous and extremely wheel weights or counterbalance weights to increase flammable. Be especially careful when handling petrol, as machine stability. carelessness can result in personal injury or fire. • Only store fuel in containers approved for the purpose. IMPORTANT INFORMATION • Never remove the fuel cap and fill the fuel tank when the engine is running. Wheel weights fitted on the rear
Resumo do conteúdo contido na página número 11
SAFETY INSTRUCTIONS • Do not change the setting of governors. If you run too fast, Engage the parking brake and tie the tension belts around you risk damaging the machine components. See chapter stable parts on the machine, e.g. frame or rear wagon. on Technical data for highest permitted engine speed. Secure the machine by tensioning the belts towards the back and the front of the trailer respectively. • Never use the machine indoors or in spaces lacking proper ventilation. Exhaust fumes co
Resumo do conteúdo contido na página número 12
PRESENTATION The parking brake lock disengages automatically when the Presentation brake pedal is pressed. Congratulations on your choice of an excellent quality product that will give you great pleasure for many years. This Cutting unit operator’s manual describes Rider 318 and Rider 320 AWD. Rider 318 and Rider 320 AWD can be equipped with three Rider 320 AWD is equipped with all wheel drive. different cutting units. The power transmission from the engine is handled by a hydrostatic trans
Resumo do conteúdo contido na página número 13
PRESENTATION Seat Release lever The seat has a jointed attachment on the front edge and can The release control must be pulled out in order for the be tipped forward. machine to be moved when the engine is shutoff. The seat can also be adjusted lengthways. Should you attempt to drive the machine with the clutch controls pulled out it will not move. The drive on the axle is Loosen the handles under the seat and adjust it forwards or disengaged when one of the controls is pulled out. backwards
Resumo do conteúdo contido na página número 14
T RT S A START START START Driving Move the throttle in between positions 1 and 2. Before starting 1 2 • Read the safety instructions and information concerning 3 the placement of controls and functions before starting. • Perform daily maintenance before starting as set out in the Maintenance schedule. 5 Turn the ignition key to the start position. IMPORTANT INFORMATION The air intake grille in the engine cover behind the driver’s seat must not be blocked by, for example, clothing, leaves, g
Resumo do conteúdo contido na página número 15
Driving 4 Press in the lock button on the lifting lever and lower the Connecting the jump leads cutting unit. IMPORTANT INFORMATION • Connect each end of the red cable to the POSITIVE pole The life span of the drive belts is increased significantly if (+) on each battery, exercise care not to short circuit any the engine runs at a low speed when the blades are of the ends against the chassis. engaged. Therefore apply full throttle first when the cutting unit has been moved to the mowing posi
Resumo do conteúdo contido na página número 16
START START Driving Cutting tips Stop the engine Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. Avoid idling the engine for long periods, as there is a risk of carbon build-up on the spark plugs. 1 Lift up the cutting unit by pulling the lever backwards to its locked position. WARNING! Clear the lawn from stones and other objects which can be thrown out by ! the blades. • Localise and mark stones and ot
Resumo do conteúdo contido na página número 17
Maintenance Maintenance schedule The following is a list of the maintenance which should be conducted on the machine. For those points not described in this manual, visit an authorised service workshop. Daily maintenance At least Maintenance Maintenance before starting once a year interval in hours 25 50 100 200 Cleaning X Check the engine’s oil level X Check the engine’s cooling air intake X Check the fuel pump air filter X Check the steering wires X Check the battery X Check the safety system
Resumo do conteúdo contido na página número 18
Maintenance Right-hand fender Cleaning Remove the accelerator knob (1), screws (2 and 3), and Clean the machine directly after use. It is much easier to wash remove the cover. off grass cuttings before they dry. 2 1 2 2 Left-hand fender Oily dirt can be removed using a cold degreasing agent. Loosen the screws holding the wing cover and lift off the Spray on a thin layer. cover. Rinse at normal water pressure. Do not direct the jet towards electrical components or bearings. Do not rinse hot
Resumo do conteúdo contido na página número 19
Maintenance • If necessary, the wires can be adjusted by tightening the 2 Loosen the locking nuts (1). adjuster nuts on each side of the steering collar. Do not over tighten the cables; they should only be drawn in towards the steering collar. 3 Tension the cable using the adjuster screw (2) until the Hold the cable, for example using an adjustable wrench, play in the cable is taken up. so that it does not twist. 4 Tighten the locking nuts (1). If the adjustment is only made on one side, the
Resumo do conteúdo contido na página número 20
Maintenance 3 Remove the filter cartridge from the filter housing. Replacement of fuel filter Replace the fuel filter every 100 running hours (once per season) or more frequently if it is clogged. IMPORTANT INFORMATION Never run the engine without the air filter fitted. Do not use compressed air to clean the paper filter. Replace the filter as follows: The filters must not be oiled. They must be fitted dry. 1 Open the engine cover. 4 Remove the foam rubber prefilter which is placed around 2 Move the hose
