Resumo do conteúdo contido na página número 1
Operators manual
Models:
968999254 / iZ4217TSKAA
968999255 / iZ4817TSKAA
968999256 / iZ4821TKAA
968999257 / iZ5223TKAA
Please read these instructions carefully and make
968999258 / iZ5223TKOA
sure you understand them before using the machine.
968999259 / iZ6123TKAA
MANUAL NO. 539110842 REV. IR (09/08/04)
Resumo do conteúdo contido na página número 2
©2004 Husqvarna. All right reserved. Beatrice, NE. Printed U.S.A. 2
Resumo do conteúdo contido na página número 3
CONTENTS INTRODUCTION .................................. 4-5 OPERATING INSTRUCTIONS ............ 20 SYMBOLS & DECALS ......................... 6 SAFETY INSTRUCTIONS.................... 7 Roll Bar and Seat Belt ................ 20 General use and saftey rules ...... 7-8 Starting and operation ................. 20 Driving on slopes ........................ 9 Controls ...................................... 20-21 Children safety............................ 10 MAINTENANCE ............................
Resumo do conteúdo contido na página número 4
INTRODUCTION Introduction Congratulations Thank you for purchasing a Husqvana ride-on mower. This machine is built for the greatest efficiency and rapid mowing of large areas. Convenient controls and a hydrostatic transmission regulated by steering levers also contribute to the machine’s performance. This manual is a valuable document. Following the instructions (use, service, maintenance, etc.) can considerably increase the life-span of your machine and even increase its resale value. If you se
Resumo do conteúdo contido na página número 5
INTRODUCTION Good Service Husqvarna’s products are sold all over the world and only in specialized retail stores with complete service. This ensures that you as a customer receive only the best support and service. Before the product is delivered, the machine has, for example, been inspected and adjusted by your retailer, see the certificate in the Service Journal in this operator’s manual. When you need spare parts or support in service questions, warranty issues, etc., please consult the follo
Resumo do conteúdo contido na página número 6
SYMBOLS AND DECALS Symbols and Decals These symbols are found on the machine and in the operator’s manual. Study them carefully so that you know what they mean. WARNING! Xxx xxxx xxxx xxxxxxxx xxx x X xxxx xxxxxx xx. xx xxxxxxxx xxxxx xxx xx. Used in this publication to notify the reader of a risk of personal injury, particularly if the reader should neglect to follow instructions given in the manual. IMPORTANT INFORMATION Xxxxxxx xxxx xxxxxxxx xxx xxx xxxx xxxxxx xx. Used in this publication to
Resumo do conteúdo contido na página número 7
SAFETY INSTRUCTIONS Safety Instructions These instructions are for your safety. Read them carefully. WARNING! This symbol means that important safety instructions need to be emphasized. It concerns your safety. General Use • Read all instructions in this operator’s manual and on the machine before starting it. Ensure that you understand them and then abide by them. • Learn how to use the machine and its con- trols safely and learn how to stop quickly. Also learn to recognize the safety decals. •
Resumo do conteúdo contido na página número 8
SAFETY INSTRUCTIONS • Be careful when rounding fixed objects, so that the blades do not hit them. Never drive over WARNING! foreign objects. Engine exhaust and certain vehicle components contain or emit chemi- • Only use the machine in daylight or in other cals considered to cause cancer, well-lit conditions. Keep the machine a safe birth defects, or other reproductive distance from holes or other irregularities in system damage. The engine ex- the ground. Pay attention to other possible haust c
Resumo do conteúdo contido na página número 9
SAFETY INSTRUCTIONS Driving on Slopes Driving on slopes is one of the operations where the risk is greatest that the driver will lose control or the machine will tip over, which can result in serious injury or death. All slopes require extra caution. If you cannot reverse up a slope or if feel unsure, do not mow the slope. Do as follows: • Remove obstacles such as stones, tree branches, etc. • Mow up and down, not side-to-side. • Never drive the rider on terrain that slopes more than 10°. 6003-0
Resumo do conteúdo contido na página número 10
SAFETY INSTRUCTIONS Children: • Serious accidents may occur if you fail to be on guard for children in the vicinity of the ma- chine. Children are often attracted to the ma- chine and mowing work. Never assume that children will stay put where you last saw them. • Keep children away from the mowing area and under close supervision by another adult. • Keep an eye out and shut off the machine if children enter the work area. • Before and during a reversing maneuver, look backward and downward for
Resumo do conteúdo contido na página número 11
SAFETY INSTRUCTIONS • Allow the engine to cool before refueling. Do not smoke. Do not fill fuel in the vicinity of sparks or open flames. • If leaks arise in the fuel system, the engine must not be started until the problem has been resolved. WARNING! The engine, the exhaust system, • Store the machine and fuel in such a way that and the hydraulic system’s compo- there is no risk of leaking fuel or fuel vapor nents become very warm during leading to damages. operation. • Check the fuel level bef
Resumo do conteúdo contido na página número 12
SAFETY INSTRUCTIONS • Never use the machine indoors or in spaces lacking proper ventilation. The exhaust fumes contain carbon monoxide, and odorless, poi- sonous, and lethal gas. • Stop and inspect the equipment if you run over or into anything. If necessary, make repairs before starting. • Never make adjustments with the engine run- ning. • The machine is tested and approved only with the equipment originally provided or recom- mended by the manufacturer. • The blades are sharp and can cause cu
Resumo do conteúdo contido na página número 13
SAFETY INSTRUCTIONS Roll Over Protection System WARNING! This structure’s capability may be imparired by structural damage if overturned, or al- teration occurs. If any of these conditions take place, the total structure MUST be re- placed. DO NOT use ROPS as a lifting, attaching or anchoring point. DO NOT exceed Max GVW: 2822; ROPS mass 34 lbs./16 kg. Read machine operator’s manual before each use. Securely fasten your seat belt if the unit has a ROPS. Where possible, avoid operating the unit n
Resumo do conteúdo contido na página número 14
PRESENTATION Presentation Lawnmowers and all power equipment, can be potentially dangerous if used improperly. Thank you for buying a HUSQVARNA! Before Safety requires good judgement, careful use in operating your new mower, read, understand and accordance with these instructions and com- follow the safety instructions and other directions mon sense. in this manual. ROPS Deck Lift Lever Motion Control Levers Fuel Cap Park Brake Lever Blade Engagement Switch Key Switch Hour Meter 14
Resumo do conteúdo contido na página número 15
SETUP AND ADJUSTMENTS WARNING! No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- 4. Torque all 1/2” hardware to 80 ft./lbs. (110 N•m). tery cable removed from battery. 5. Install and tighten knobs against the side post. Setup Uncrate machine. LATCH PIN TOP LOOP ROPS Assembly (Roll Over Protection System) KNOB ROPS Assembly Components 1 - Top Loop 1/2C X 3 1/4 CAPSCREW 1 - Left Side Post 1/2C CENTERLOCK 1 - Right Side Post NUT 1 -
Resumo do conteúdo contido na página número 16
SETUP AND ADJUSTMENTS Control Arms Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1 Control Motion Arm Seat Install Control Lever 1. Remove seat assembly from the crate. 2. Remove the four 5/16C nyloc nuts or 5/16C studed knobs from the bottom of the seat. Retain for use later. 3. Align the seat bottom with the holes in the seat FIG - 1 fra
Resumo do conteúdo contido na página número 17
SETUP AND ADJUSTMENTS Adjustments Lift Lever Cutting Height Stop the mower and disengage the blades. Raise the deck height lever to the transport posi- tion. Deck Height Adjusment Plates Remove the height adjustment pin and place it in the desired cutting height hole. Lower the lift lever down onto pin. NOTE: Anti-scalp rollers must be in the proper position for maximum deck floata- tion. See the decal on the front deck for proper settings. FIG - 4 FIG - 4 Mower Deck Leveling For proper performa
Resumo do conteúdo contido na página número 18
SETUP AND ADJUSTMENTS Park Brake Adjustment For Models: 968999256, 968999257, 2. If adjustment is needed, loosen the lock nut 968999258, 968999259 next to the yoke. Remove the pin from the front yoke so you can rotate the yoke on the adjust- 1. Stop engine and remove key. Release park ment link until the proper gap is achieved. brake and measure the length of the spring. The distance between the washer on each end 3. Make sure the brake arm on both sides does of the spring should be 2-7/8". FI
Resumo do conteúdo contido na página número 19
SETUP AND ADJUSTMENTS Begin with either side and put the motion control lever into the neutral position. Adjust the motion control linkage by rotating the double nuts in the proper direction until the wheel stops rotating. FIG - 7 Move the motion control lever forward then into the neutral position and place it into the neutral slot. The wheel must be stopped com- pletely at this point. Now do the same in reverse and release the lever. The lever should return to neutral on its own. Motion Contr
Resumo do conteúdo contido na página número 20
OPERATION Operating instructions By moving the levers an equal amount forward or back the machine will move in a straight line in Roll Bar and Seat Belt that direction. FIG - 8 Operate the unit with the roll bar in the raised and locked position and use seat belt. There is no Movement of either lever forward will cause the rollover protection when the roll bar is down. If it is right or left wheel to rotate in a forward direction. necessary to lower roll bar do not wear the seat To stop movement
