Resumo do conteúdo contido na página número 1
Rider 1030 BioClip
Rider 1200
Operator´s manual
Please read these instructions carefully and make sure
you understand them before using the machine.
101 89 37-26
Resumo do conteúdo contido na página número 2
Svenska – 31 Sve-5 225/232/235 Bruk 31 97-11-25, 08.46
Resumo do conteúdo contido na página número 3
CONTENTS Operator’s Manual for Rider 1030 BioClip and Rider 1200 Safety instructions ............................................. 2 Checking the engine’s oil level....................... 19 Safety rules for USA ........................................ 2 Checking the engine’s cooling air intake........ 19 Explanation of symbols ..................................... 4 Checking the fuel pump’s air filter.................. 19 Safety instructions ............................................. 5 Check
Resumo do conteúdo contido na página número 4
SAFETY INSTRUCTIONS !! 1. Safety rules for USA Safe operation practices for ride-on mowers IMPORTANT! This cutting machine is capable of amputating hands and feet and throwing objects. Failure to ob- serve the following safety instructions could result in serious injury or death. Use slow speed. Choose a low gear so that I. General operation you will not have to stop or shift while on the 1. Read, understand and follow all instructions in slope. the manual and on the machine before start- Follow
Resumo do conteúdo contido na página número 5
SAFETY INSTRUCTIONS IV. Service 1. Use extra care in handling gasoline and other fuels. They are flammable and vapours are explosive. a) Use only an approved container. b) Never remove gas cap or add fuel with the engine running. Allow engine to cool before refuelling. Do not smoke. c) Never refuel the machine indoors. d) Never store the machine or fuel container inside where there is an open flame, such as Danger, keep hands and feet away in a water heater. 2. Never run a machine inside a close
Resumo do conteúdo contido na página número 6
EXPLANATION OF SYMBOLS These symbols are on the machine and in the instructions. Study them carefully so that you know what they mean. Read the instructions. R N Reverse Neutral Fast Slow Engine off Battery Choke Fuel Oil pressure Cutting height Backwards Forwards Ignition Hydrostatic freewheel ! ! ! ! ! Use hearing protection Clutch in Clutch out Parking brake Brake Warning European standard for Sound level Warning! Rotating blades Warning! Risk that the machine
Resumo do conteúdo contido na página número 7
RIDER RIDER 970 RIDER 970 970 RIDER 850 RIDER 850 RIDER 850 RIDER 850 RIDER RIDER 850 850 SAFETY INSTRUCTIONS These instructions are for your safety. Read them carefully. This symbol implies that important safety rules are applicable. This is for your safety and the operating reliability of the machine. ! General use: • Make yourself familiar with the controls and how to stop quickly. • Read all the instructions in Operator’s Manual and on the machine before starting it. Make sure you understan
Resumo do conteúdo contido na página número 8
SAFETY INSTRUCTIONS • Watch out for traffic when working close to a road, or crossing one. • Be careful when rounding a fixed object so that the blades do not hit it. Never drive intentionally over a foreign object. • The machine is heavy and can cause very severe crush injuries. Be extra careful when loading it on a trailer or truck. • Be careful when pulling a load or using heavy equipment. a. Only use approved tow hooks. b. Limit the load to what you can manage safely. c. Do not make sharp tu
Resumo do conteúdo contido na página número 9
RIDER 970 RIDER 970 RIDER 970 RIDER 850 RIDER 850 RIDER 850 RIDER 850 RIDER RIDER 850 850 SAFETY INSTRUCTIONS Do not do the following: • Avoid unnecessary turns on slopes, and if turning is necessary turn slowly and gradually, downwards if possible. • Do not cut close to edges, ditches or banks. The machine can suddenly tip over if a wheel goes over the edge of a drop or a ditch, or if a bank gives way. • Do not cut wet grass. It is slippery and the tyres can loose their grip so that the machin
Resumo do conteúdo contido na página número 10
RIDER RIDER RIDER 850 RIDER 850 RIDER 850 RIDER 850 850 850 RIDER 970 RIDER 970 RIDER 970 SAFETY INSTRUCTIONS • Check the fuel level each time before using the machine, and leave space for the fuel to expand since the heat from the engine and hot sun can cause the fuel to run over. • Avoid overfilling. If petrol has been spilt on the machine wipe it up and wait until it has evapor- ated before starting the engine. If petrol is spilt on clothes, change them. • Be extra careful when handling batt
Resumo do conteúdo contido na página número 11
PRESENTATION Presentation The power transmission from the engine is handled These instructions describe two machine models, by a hydrostatic gearbox which enables stepless Rider 1030 Bioclip and Rider 1200. variation of the speed with the foot pedals. Rider 1030 Bioclip and Rider 1200 are fitted with There is one pedal for driving forward and one for Vanguard V-Twin engines from Briggs & Stratton of reversing. 18 h.p. The cutting unit on Rider 1200 has rear ejection Rider 1030 has a cutting unit
Resumo do conteúdo contido na página número 12
PRESENTATION Throttle control The throttle control regulates the engine speed, and thereby also the rotation speed of the blades. To increase or reduce the engine speed the control is moved forwards or backwards. Choke lever The choke lever is used for cold starting and to give the engine a richer fuel mixture. For cold starting the lever is moved backwards to its end position. Speed limiter 1 The speed of the machine is steplessly regulated 2 with two pedals. Pedal (1) is used to drive forwards
Resumo do conteúdo contido na página número 13
PRESENTATION Cutting unit Rider 1030 has a Bioclip unit which cuts the grass finely by cutting it several times before it is returned to the lawn as fertiliser. The cutting unit on Rider 1200 has rear ejection, i.e. the grass cuttings are thrown out behind the cutting unit. Lift lever for cutting unit The lift lever is used to set the cutting unit in transport or mowing position. 1. Pull back the lever to the locked position for transport. The cutting unit will lift up and the blades stop
Resumo do conteúdo contido na página número 14
PRESENTATION Lever for adjustment of the cutting height The cutting height can be adjusted to 7 different positions with the cutting height lever. To achieve an even cutting height it is important that the tyre pressures are the same on the front wheels (60 kPa). Parking brake The parking brake is applied as follows: 1. Push down the brake pedal. 2. Push in the lock button on the steering column. 3. Release the brake pedal while holding the button pressed. The parking brake lock disengages autom
Resumo do conteúdo contido na página número 15
DRIVING Before starting • Read the safety instructions and information on the location and function of the controls before starting (see pages 5–12). • Conduct daily maintenance before starting (see maintenance schedule on page 17). • Adjust the seat to the required position. Starting the engine 1. Lift up the cutting unit by pulling the lever back- wards to locked position (transport position) and apply the parking brake. 2. Move the throttle control to the middle position. 3. If the engine is
Resumo do conteúdo contido na página número 16
DRIVING 5. When the engine starts release the ignition key immediately back to neutral position. IMPORTANT INFORMATION Do not run the starter for more than about 5 seconds at a time. If the engine does not start, wait about 10 seconds before trying again. 6. Push the choke lever gradually forward when the engine has started. 7. Set the required engine speed with the throttle control. WARNING! Never run the engine indoors, in en- ! closed or poorly ventilated areas. The exhaust fumes contain toxi
Resumo do conteúdo contido na página número 17
DRIVING 3. Select the required cutting height (1–7) with the cutting height lever. 4. Push in the lock button on the lift lever and lower down the cutting unit. Cutting tips WARNING! ! Clear the lawn from stones and other objects which can be thrown out by the blades. • Localise and mark stones and other fixed objects to avoid collision. • Start with a high cutting height and reduce down until the required mowing results are obtained. • The mowing results are best with a high engine speed (fast
Resumo do conteúdo contido na página número 18
DRIVING WARNING! Never drive the machine on ground ! at an angle of more than 15°. Mow slopes upwards and downwards, never across. Avoid sudden changes in direction. MAX 15 Stopping the engine Preferably allow the engine to idle for a minute to obtain normal working temperature before stopping it if it has been working hard. 1. Lift up the cutting unit by pulling the lever back to the locked position. 2. Move the throttle control to the MIN. position. Turn the ignition key to the STOP. Disengage
Resumo do conteúdo contido na página número 19
MAINTENANCE Maintenance schedule The following is a list of the maintenance which should be conducted on the machine. For the items which are not described in these instructions go to an authorised service workshop. Daily Maintenance interval main- in hours Maintenance Page tenance before start 25 50 100 300 Check the engine’s oil level 19 l Check the engine’s cooling air inlet 19 l Check the fuel pump’s air filter 19 l Check the transmission’s air inlet 20 l Check the transmission’s oil level
Resumo do conteúdo contido na página número 20
MAINTENANCE Dismantling of the machine hoods Engine hood Release the two rubber straps on the rear edge of the engine hood and lift off the hood. Front hood 3 Dismantle the screws (1, 2 and 3) and lift off the 2 front hood. 1 Right-hand fender Dismantle the foot-plate (1), screws (2 and 3), and 2 lift off the fender. 1 3 Left-hand fender Dismantle the screws (1 and 2), and lift off the 1 fender. 2 18 – English
