Resumo do conteúdo contido na página número 1
OPERATING INSTRUCTIONS
BATTERY CHARGER IR-200BC
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ........................... 2 5. CHARGING ................................................. 5
2. GENERAL DESCRIPTION ......................... 3 6. TROUBLESHOOTING ................................ 7
3. HANDLING PRECAUTIONS ...................... 3 7. SPECIFICATIONS ...................................... 8
Accessories ................................................. 8
4. NOMENCLATURE AND FUNCTIONS ....... 4
T
Resumo do conteúdo contido na página número 2
1. SAFETY PRECAUTIONS • Before installation or use, be sure to carefully read all the instructions in this section for correct and safe operation. • Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or cautions regarding safety. • After reading, keep this manual handy for future reference. Indicates a potentially hazardous situation which, if mishandled, could WARNING result in death or serious personal injury. Indicates a potentially haza
Resumo do conteúdo contido na página número 3
• Switch off the power, and unplug the power supply • Make sure to observe the following handling plug from the AC outlet for safety purposes when precautions so that a fire or personal injury does cleaning or leaving the unit unused for 10 days or not result from leakage or explosion of the battery. more. Doing otherwise may cause a fire or electric · Be sure to use only the rechargeable battery shock. designed for use with the infrared wireless microphone • Use the dedicated AC adapter for the
Resumo do conteúdo contido na página número 4
4. NOMENCLATURE AND FUNCTIONS 2 3 4 5 8 6 7 6 1 7 1. Power switch 5. Infrared wireless microphone receptacle To turn on the power, set this switch to the [ ] • Use the mounting adapter when charging the position. To turn off the power, shift this switch IR-200M microphone. back. • When charging the IR-300M microphone, remove the mounting adapter and insert the 2. Mounting Adapter microphone directly into the receptacle. (factory-attached to the charger) Used when charging the IR-200M handheld
Resumo do conteúdo contido na página número 5
5. CHARGING Avoid charging microphones installed with rechargeable batteries other than the dedicated IR-200BT battery. CAUTION Charging any other than the specified battery could result in fire or personal injury due to battery rupture. Notes • Use the charger in locations where the ambient temperature range is between 0 and 40 ºC (32 to 104 ºF). • Charge the IR-200BT battery before using it. • If an infrared wireless microphone containing an IR-200BT battery has been stored for a long period
Resumo do conteúdo contido na página número 6
Step 4. Turn off the power of the infrared wireless microphone to be charged, then insert the 2 IR-200BT rechargeable batteries into the microphone. For proper battery insertion, refer to the instruction manual enclosed with the infrared wireless microphone. Note Charging cannot be correctly performed if the infrared wireless microphone's power switch is set to the ON position. Step 5. Insert the infrared wireless microphone fully into Removing the mounting adapter the charger's microphone rece
Resumo do conteúdo contido na página número 7
6. TROUBLESHOOTING Symptom Possible cause Remedy Power indicator does not • The AC adapter is not plugged into • Make sure the AC adapter is light even if the power a working AC outlet, or is not plugged in to a working AC wall switch is turned on. plugged in correctly. outlet correctly. • AC adapter plug is not connected to • Connect the plug to the charger's the charger. power input terminal. Charging indicator (red) •The batteries used in the • Install the appropriate dedicated IR- does not l
Resumo do conteúdo contido na página número 8
7. SPECIFICATIONS Power Source AC mains, 50/60 Hz (Power is supplied from the enclosed AC adapter.) Current Consumption Max. 2 A Charging Time Max. 3 hours 1 Number of wireless 2 pieces* microphones to be charged simultaneously Operating Temperature 0 to 40 °C (32 to 104 °F) Operating Humidity 30 to 85% RH Finish Case: ABS resin, metallic gray, 50% gloss, paint Microphone receptacle section: PPE resin, black 2 Dimensions 238 (w) x 83 (h* ) x 98 (d) mm (9.37" x 3.27" x 3.86") Weight 635 g or 1
