Manual do usuário Schumacher SE-1072

Resumo do conteúdo contido na página número 1

277-999
ELECTRIC CORP.
801 BUSINESS CENTER DRIVE • MOUNT PROSPECT, ILLINOIS  800-621-5485  Ext. 322
Send Warranty Product Repairs to: 605 South Vermilion, Suite C, Brownsville, TX 78521-6851
Call Customer Service if you have questions: 1-800-621-5485
A. IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS -This manual contains
important safety and operating instructions for battery charger Model SE-1072.
A BATTERY CHARGER RECEIVES AC POWER FROM THE ELECTRIC OUTLET, AND
DELIVERS DC CURRENT

Resumo do conteúdo contido na página número 2

2. To reduce risk of battery explosion, follow these Instructions and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of battery. Review cautionary marking on these products and on engine. C. PERSONAL PRECAUTIONS 1. Someone should be within range of your voice or close enough to come to your aid when you work near a lead-acid battery. 2. Have plenty of fresh water and soap nearby for use if battery acid contacts skin, clothing or eyes. 3. W

Resumo do conteúdo contido na página número 3

6. Do not expose charger to rain or snow. F. DC CONNECTION PRECAUTIONS 1. Connect and disconnect DC output clips only after setting any charger switches to off position and removing AC cord from electric outlet. NEVER ALLOW CLIPS TO TOUCH EACH OTHER. 2. Attach clips to battery posts and twist or rock back and forth several times to make a good connection. This tends to keep clips from slipping off terminals and helps to reduce risk of sparking. G. FOLLOW THESE STEPS WHEN BATTERY IS INSTALLED IN

Resumo do conteúdo contido na página número 4

I. GROUNDING AND AC POWER CORD CONNECTION INSTRUCTIONS Charger should be grounded to reduce risk of electric shock. Charger is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an outlet that is properly Installed and grounded in accordance with all local codes and ordinances. DANGER - Never alter AC cord or plug provided - if it will not fit outlet, have proper outlet installed by a qualified electrician. improper connecti

Resumo do conteúdo contido na página número 5

Selector 12 Volt 6 Volt Switch Battery Battery 12V 1 2 24V 2 4 36V 3 6 48V 4 8 60V 5 10 72V 6 12 L. AMP SELECTOR SWITCH The charge rate of either 5 or 10 Amp maybe selected for any selected output voltage. M. CHARGE PERIOD AND TIMER SETTING The approximate time required to bring a battery to a fully charged state depends upon the number of Ampere Hours (AH) depleted from the battery. AH’s are determined by multiplying the number of hours times the number of Amps supplied by a battery to a load.

Resumo do conteúdo contido na página número 6

When A battery reaches 80-85% of full charge, bubbles will appear on the surface of the fluid. As the battery nears full charge, bubbling will become more noticeably vigorous. Disconnecting from Battery: Before disconnecting from battery read Instructions F, G and H carefully. N. STORAGE: Store battery charger in a dry area. P . PROBLEM CHECKLIST 1. If no meter reading, check the following: a. Remove the charger power cord plug from the AC outlet and recheck the battery charger clips for clean,