Resumo do conteúdo contido na página número 1
Operating Instructions
With Installation Manual
(for qualified service personnel)
Electronic Board
(Interactive Panaboard)
Model No. UB-8325
Panaboard
Stand is optional.
• To assemble this unit, please refer to the Installation manual on page 83 through 99.
• Before operating this unit, please read these instructions completely and keep them carefully for future
reference.
• Because of the nature of the print film, all the printed text will remain on the film.
• This unit is designed for instal
Resumo do conteúdo contido na página número 2
Thank you for purchasing the Panasonic Electronic Board. For optimum performance and safety, please read these instructions carefully. Accessories Q’ty Q’ty • Thermal transfer film . . . . . . . . . . . . . . 1 • Batteries (LR03 “AAA”) . . . . . . . . . . . . . 6 • Markers (Black, Red, Blue-big) . . . . . . 1 each • Power cord . . . . . . . . . . . . . . . . . . . 1 3 • Eraser . . . . . . . . . . . . . . . . . . . . . . 1
Resumo do conteúdo contido na página número 3
Federal Communications Commission Requirements Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmf
Resumo do conteúdo contido na página número 4
Features The UB-8325 is equipped with two interactive functions; Projector mode and Whiteboard mode, in addition to a regular electronic board that utilizes plain paper. It is possible to use this unit as follows. ■ Electronic Board Functions • Allows copying up to 9 copies per screen • Allows printing in 2 level contrast (Normal / Dark) • Allows printing of 2-screens at the time by compressing them into a single sheet of paper ■ Projector Mode (Interactive Function) Connect the Interactive Pan
Resumo do conteúdo contido na página número 5
■ Whiteboard Mode (Interactive Function) By connecting the Interactive Panaboard to a computer, the information written on the Interactive Panaboard is displayed on the computer in real-time. This is called the Whiteboard mode. In this mode, the following operations are possible: • The information written on the Interactive Panaboard using the Electronic Pen with its cap off will be displayed on the computer screen at the same time. • The information erased using the Electronic Eraser will be
Resumo do conteúdo contido na página número 6
Table of Contents Page Before You Start For Your Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • For Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 • For users in the United Kingdom only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 • CD-ROM . . . . . . . . . . . . .
Resumo do conteúdo contido na página número 7
Using Help Before You Start Installation Using the Panasonic-DMS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 • Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 • Panaboard Operation Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 • Printing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Help Daily Care and
Resumo do conteúdo contido na página número 8
Before You Start For Your Safety To ensure safe operation the power cord For Your Safety supplied must be inserted into a standard three-prong AC outlet which is effectively grounded (earthed) through the normal To prevent severe injury and loss of life, read this wiring. section carefully before using the unit to ensure proper and safe operation of your unit. The fact that the equipment operates satisfactorily does not imply that the power CLASS 1 LED PRODUCT point is grounded (earthed)
Resumo do conteúdo contido na página número 9
Before You Start For Your Safety Stop operation immediately if your unit emits Battery smoke, excessive heat, abnormal smell or unusual noise. These conditions can cause Be sure to use the specified type of batteries fire or electric shock. Immediately turn the only. Using incorrect type of batteries can unit off and unplug the power cord, and burn or leak. contact your dealer for service. Ensure that batteries are installed with When disconnecting the unit, grasp the plug correct polar
Resumo do conteúdo contido na página número 10
For Your Safety For users in the United Do not install the unit except by a qualified service personnel. Kingdom only Safety Information After installing or moving the electronic This appliance is supplied with a moulded three pin board, lock the casters and set the fall- mains plug for your safety and convenience. prevention extension legs. A 5 amp. fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5 amps. and that it
Resumo do conteúdo contido na página número 11
Before You Start Precautions Precautions • Do not install the unit where it may be exposed to direct sunlight, near heating equipment, or Installation near air-conditioning vents as this may cause stretching and/or discoloration of the screen. • Do not install the unit in strong sunlight or strong lighting. Proper copying may become impossible. • Do not install the unit in locations where the temperature may change suddenly as this may disable the unit’s ability to make copies. • Make thick
Resumo do conteúdo contido na página número 12
Precautions • Dispose of the used thermal transfer film in a trash receptacle for burnable trash. Replacing • A negative of the copied image will remain on the thermal transfer film. (To protect the the Thermal security of your information, we recommend cutting up the used thermal transfer film with Transfer Film scissors or shredder before disposing of it.) Electronic Pen and Electronic Eraser Transmitter • Do not cover the transmitter with your hand while using an interactive function a
Resumo do conteúdo contido na página número 13
Before You Start Precautions If batteries are used improperly, batteries may leak, causing corrosion of the unit, or they may Battery burst. To prevent this, always follow the precautions given below. • Always remove batteries from the Electronic Pen and Electronic Eraser if they are not to be used for an extended period of time. • Use the same type of batteries. Do not mix different types. • Do not mix old and new batteries. • Always insert batteries with their polarity properly oriented as i
Resumo do conteúdo contido na página número 14
Precautions CD-ROM To prevent the CD-ROMs from accidental damages: Do not touch or write on the surface Do not leave the disc out of the Do not leave the disc in direct of the disc. protective case. sunlight or near heat sources. Do not place heavy objects on the To clean the disc, hold the disc by disc case or drop the case. its edges and wipe it from the center to the edges with a dry, soft cloth. 14
Resumo do conteúdo contido na página número 15
Before You Start Part Names and Functions Part Names and Functions Electronic Pen / Electronic Eraser Scanner Position Receiver Electronic Pen / Electronic Eraser Position Receiver Screen Tray Printer Output Port Control Panel This port holds up to 10 (See page 16 for sheets of output paper. details.) Power Switch ON Printer Open Lever OFF Push down this lever to open the printer door. Cord Holder Power Cord AC Inlet Printer Door Open this door to load a Paper Cover thermal transfer film o
Resumo do conteúdo contido na página número 16
Part Names and Functions Control Panel l Advance Key Contrast/Remaining Film Copy Key Indicator Contrast Key Multi-Copy/Stop Key 2-Screen Copy Key Multi-Copy/Error Indicator Panel Name Description This lamp indicator notifies the user when the time to replace the thermal transfer film is approaching (estimated) and of the printing contrast used during copying. Indicator off: Normal printing contrast Indicator on: Darker than normal printing contrast Contrast/ Indicator flashing*: Almost time to
Resumo do conteúdo contido na página número 17
Before You Start Part Names and Functions Electronic Pen and Eraser ■ Electronic Pen (see page 25) Pen button* Pen holder lever * When using the projector mode to operate the computer screen on the Interactive Panaboard screen and operating the pen while holding down the pen button achieves the same function as pressing the right mouse button. ■ Electronic Eraser (see page 26) Eraser cover Eraser cloth 17
Resumo do conteúdo contido na página número 18
Using Installing the Thermal Transfer Film 2) Insert the blue shaft into the front left hole. Installing the Thermal Transfer Film Install the thermal transfer film in the printer. Set the power switch to on ( I ). Blue shaft 1 •“ ” will flash on the Multi-Copy/Error Indicator when the thermal transfer film has run out. •The screen will move to home position and stop. ON 3) Place the blue gear on the front right groove. OFF Blue gear Push down the printer open lever and open 2 the printer d
Resumo do conteúdo contido na página número 19
Using Loading Copy Paper Tighten the film, then close the printer door. 4 Loading Copy Paper 1) Rotate the blue gear in the direction of the arrow to take up the slack on the film. It is possible to load up to 40 sheets of A4 (Letter*) 2 size copy paper [assuming a paper weight of 80 g/m (20 lb.)]. Note that only A4 (Letter*) size paper may be used. When the unit is first used or when “ ” flashes on the Multi-Copy/Error Indicator to indicate that the unit is out of paper, load copy paper as
Resumo do conteúdo contido na página número 20
Loading Copy Paper Pull the paper cover forward as shown in the Close the paper cover until a click is heard. 2 4 figure. Note To prevent paper jams such as those caused 3 by multiple sheets feeding at once, fan the •Close the paper cover, or the unit will not paper thoroughly, square it, align it with the work properly. guide inside, and insert as far as it will go. •The paper cover should be closed to make copies properly. Confirm the both latches are locked. Guide Maximum paper limit No
