Resumo do conteúdo contido na página número 1
OPERATOR’S MANUAL
18 VOLT, 1 HOUR CHARGER
P110
Your battery charger has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS n Introduction ..................................................................................................................................................................... 2 �n Safety Rules for Charger ................................................................................................................................................. 3 �n Symbols.................................................................................................................
Resumo do conteúdo contido na página número 3
SAFETY RULES FOR CHARGER n An extension cord should not be used unless WARNING! absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If READ AND UNDERSTAND ALL INSTRUCTIONS. extension cord must be used, make sure: Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. a. That pins on plug of extension cord are the same number, size and shape as those of n Before using battery cha
Resumo do conteúdo contido na página número 4
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Doub
Resumo do conteúdo contido na página número 5
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Resumo do conteúdo contido na página número 6
FEATURES PRODUCT SPECIFICATIONS Charger Voltage......................................................................................................................................................18 Volt DC Charger Input ....................................................................................................................................... 120 V, 60 Hz, AC only Charge Rate ............................................................................................................
Resumo do conteúdo contido na página número 7
ASSEMBLY UNPACKING WARNING: This product has been shipped completely assembled. If any parts are missing do not operate this tool until the n Carefully remove the charger and any accessories from missing parts are replaced. Failure to do so could result the box. Make sure that all items listed in the packing list in possible serious personal injury. are included. n Inspect the charger carefully to make sure no breakage or damage occurred during shipping. WARNING: n Do not discard the pack
Resumo do conteúdo contido na página número 8
OPERATION CHARGING THE BATTERY PACK Battery packs for this tool are shipped in a low charge con- P110 dition to prevent possible problems. Therefore, you should CHARGER charge them until the green LED on the front of the charger comes on. GREEN LED NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operation followed by recharging) for them to become fully charged. CHARGING A COOL BATTERY PACK See Figure 3. If battery pack is within normal temp
Resumo do conteúdo contido na página número 9
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing, use only identical Ryobi replacement plastics are susceptible to damage from various types of parts. Use of any other parts may create a hazard or commercial solvents and may be damaged by their use. Use cause product damage. clean cloths to remove dirt, dust, oil, grease, etc. WARNING: WARNING: Do not at any time let brake fluids, gasoline, petroleum- Always wear safety goggles or
Resumo do conteúdo contido na página número 10
OPERATOR’S MANUAL 18 VOLT, 1 HOUR CHARGER P110 • SERVICE Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers. • MODEL NO. AND SERIAL NO. The model num
