Resumo do conteúdo contido na página número 1
VIDEO
DOORPHONE
Model 94531
SEt uP AND OPERAtINg INStRuctIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed exclusively by Harbor Freight t ools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE tHIS MANuAl.
© ®
Copyri
Resumo do conteúdo contido na página número 2
SPEcIFIcA tIONS Electrical Requirements AC Adapter Power Input: 120 VAC / 60 Hz AC Adapter Power Output: 15 VDC AC Adapter Type: Class II Transformer AC Adapter Plug Type: 2-Prong (Non-Polarized) AC Adapter Power Cord Type: 22 AWG x 2C x 6 Ft. Camera Dimensions 4-1/2” W x 7-7/8” H x 2-1/4” Depth Camera Specifications Power Input: 15 VDC / Power Consumption: 10 Watts 380 Line Resolution / Six Infrared LED’s 13 Ft. (4m) Maximum Night Viewing Call & Talk Push-Button Control Monitor Dimensions 10-3/
Resumo do conteúdo contido na página número 3
edges, or moving parts. Replace damaged Power cords immediately. Damaged Power Cords increase the risk of electric shock. 5. Disconnect the Ac Adapter from the power source before making any adjustments, changing accessories, or storing the Video Doorphone. Such preventive safety measures reduce the risk of electric shock. 6. use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one product may become hazard- ous when use
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See t able A.) 6. If you are using an extension cord outdoors, make sure it is marked with the suf- fix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified elec- trician
Resumo do conteúdo contido na página número 6
Resumo do conteúdo contido na página número 7
6. Position the Indoor Unit Mounting Plate (4) against the wall, aligning the four small rectangular openings in the Mounting Plate with the four pre-drilled holes in the wall. Screw four Screws (5) with four Washers (5) into the plastic Wall An- chors (5) to secure the Mounting Plate to the wall. NOtE: Use a leveling device to ensure the Mounting Plate is straight and level before tightening the Screws. (See Figure c.) ScREW (8) OutDOOR uNIt MOuNtINg PlA tE (7) WAll ANcHOR (5) ScREW 5 F
Resumo do conteúdo contido na página número 8
to ensure the Mounting Plate is straight and level before tightening the Screws. (See Figure D.) t o connect the Wiring: Note: The Outdoor Unit (11) is factory pre-wired with approximately fifty feet of Tele- phone Cord (6). If more length is required between the Indoor Unit (1) and Out- 2 door Unit, use RVV5 x 0.5 mm cord (not included). (See Assy. Diagram.) 1. WARNINg! Avoid accidental electrical shock. If running the Telephone Cord (6) within wall, floor, or ceiling spaces from the O
Resumo do conteúdo contido na página número 9
INDOOR uNIt FEA tuRES POWER ON INDIcAt OR MONIt OR ElEctRONIc DOOR HANDSEt uNlOcK Butt ON AlARM Butt ON MONIt OR Butt ON FIguRE F OPERAtINg INStRuctIONS Note: The Camera on the Outdoor Unit (11) has a maximum field of vision of approxi- mately 13 feet. (See Figure E.) 1. To operate the Video Doorphone, press the Call Button on the Outdoor Unit (11). A chime will immediately sound on the Indoor Unit (1), and the visitor’s image will automatically appear on the Monitor of the Indoor Unit. (Se
Resumo do conteúdo contido na página número 10
Resumo do conteúdo contido na página número 11
PlEASE READ tHE FOllOWINg cAREFull Y THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEI- THER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS
Resumo do conteúdo contido na página número 12
ElEctRIcAl ScHEMAtIc ELECTRONIC LOCK (NOT INCLUDED) Note: If connecting the Indoor Unit (1) to an electronic lock, terminals C and D on the 2 Indoor Unit must be connected with the electronic lock using RVV2 x 1.0mm or 2 RVV2 x 1.5mm cord. SKU 94531 For technical questions, please call 1-800-444-3353 PAGE 12 REV 07h SKU 94531 For technical questions, please call 1-800-444-3353 PAGE 12
