Resumo do conteúdo contido na página número 1
NETWORK INTERCOM SYSTEM
AN-8000 SERIES
Quickstart Guide
Thank you for purchasing AIPHONE's Network Intercom system.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
AN Quickstart Guide Overview Network Design Setup a network your system will use to communicate between devices System Name The first (and critical) step in editing an existing system or designing a new one Unit Scan Give your equipment IP addresses Equipment List Tell the software what hardware you have Station Table Give your equipment dialing extension numbers Setting up Door Stations Tell the doors which master to call Setting up Master Stations Set a master to auto ans
Resumo do conteúdo contido na página número 4
Unit Scan Unit Scan is used to make IP address assignments to the hardware. With the Unit Scan window open click the Scan button. When the equipment list appears, double click each address and change it to match what you were given by the network administrator and press enter to save each setting. Once you have assigned the devices unique IP addresses, put a check in the box next to each device and hit Configuration to save those settings to the devices. You may then close the Unit
Resumo do conteúdo contido na página número 5
Station Table The Station Table is the tab that allows us to assign extensions to allow the end user to dial between equipment. Switch to the Station Table tab and fill out the blank column Station Number for each device. If you need more than 2 digits, change the Station No. digits field first and press Enter to accept. To assign a Station Number, double click on the field you wish to change, and your curser will appear. Enter the extension you wish the End User to dial in order to
Resumo do conteúdo contido na página número 6
Paging To set up paging switch to the Paging tab and select the stations you’d like to be in Zone 1, Zone 2, and so on by adding check marks next to those stations. A paging zone can be equipment like a Door station or Master station, a Paging amp, or a combination of them. Any master may initiate a page by pressing the Paging key then the zone #. Paging is used when you want to make a one-way announcement to one or more stations and / or paging amps and is preceded by an announcemen
Resumo do conteúdo contido na página número 7
Advanced: Incoming Calls To set up automatic transferring and multiple masters getting a call, the feature intended must be enabled and then specific assignments must be made in the called station’s Function Settings(2) tab. There are 5 ways to handle an incoming call. Group call: Enabled in the called station’s Station tab. Each incoming door call will also ring up to 15 additional masters. Call forwarding: Enabled in the Exchange’s Function Settings tab, or in Function Settings1 tab o
Resumo do conteúdo contido na página número 8
Advanced: Background Music and Camera Call Up Give the quantity of MI’s is given in the Equipment Registration tab and then the Multi Interface tab may be used. Each AN-8000MI provides 2 paging amp connections which you can configure using the Function Settings tab. The Audio I/O may be used to bring in a music source, select BGM on that channel. Once the background music is chosen for one of those 2 outputs, each Exchange or IP Master Function Settings(1) tab can be used to set up
Resumo do conteúdo contido na página número 9
Troubleshooting the Network (such as the PoE switch from PowerDsine) typically do With as many steps there are and as many not block internal traffic which is the main reason we options to set in this system somewhere along the line a recommend setting up the equipment in this simulated mistake could be made, or even the best software setup test environment before deploying it in the field. It will won’t work at a particular site because of some external however block incoming WAN traffic
Resumo do conteúdo contido na página número 10
screenshots it is still “New System” which means an uploaded? Does it ask for a user name and password? upload has not been attempted and the default system Remember to try the system name and password you name and password should still work, assuming of gave it in addition to the default AN-8000 and guest course no one else has attempted to upload settings to password. If it only accepts the default information it that device. You can directly log in and undo settings probably doesn’t ha
