Manual do usuário Cooper Lighting INVUE IMI-572

Resumo do conteúdo contido na página número 1

TM
Ascent/Strut Fixtures
Sheet 1 of 5
INSTALLATION INSTRUCTIONS
4/26/04 IMI-572
IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE.
General: Upon receipt of fixture thoroughly inspect for any Safety: This fixture must be wired in accordance with
freight damage, which should be brought to the attention of the national electrical code and applicable local codes
the delivery carrier. Compare the catalog description listed and ordinance. Proper grounding is required to insure
on the pac

Resumo do conteúdo contido na página número 2

TM Ascent/Strut Fixtures Sheet 2 of 5 INSTALLATION INSTRUCTIONS 4/26/04 IMI-572 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values. 5. Using WALL PLATE as a template, drill (4) holes in wall. Install appropriat

Resumo do conteúdo contido na página número 3

TM Ascent/Strut Fixtures Sheet 3 of 5 INSTALLATION INSTRUCTIONS 4/26/04 IMI-572 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN FOR FUTURE REFERENCE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. 8. Push SUPPORT BRACKET into WALL BRACKET and lower 7. Hook WALL BRACKET over WALL PLATE and place fixture until WALL BRACKET fits over WALL PLATE. Tighten SUPPORT BRACKET into SUPPORT HOLES in WALL PLATE 1/4-20 SOCKET

Resumo do conteúdo contido na página número 4

TM Ascent/Strut Fixtures Sheet 4 of 5 INSTALLATION INSTRUCTIONS 4/26/04 IMI-572 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values. 9. To reinstall POWER TRAY, hang POWER TRAY from POWER REFLECTOR Rotation/Remo

Resumo do conteúdo contido na página número 5

TM Ascent/Strut Fixtures Sheet 5 of 5 INSTALLATION INSTRUCTIONS 4/26/04 IMI-572 IMPORTANT: READ CAREFULLY BEFORE INSTALLING FIXTURE. WARNING: Risk of Electric Shock. Disconnect power at fuse or circuit breaker before installing or servicing. WARNING: Risk of Personal Injury. Fixture may become damaged and/or unstable if not installed properly. Tighten all fixture components to their recommended torque values. 12. To remove the REFLECTOR, disconnect the REFLECTOR NEMA TWIST LOCK PHOTOCON