Manual do usuário Kettler 2577

Resumo do conteúdo contido na página número 1

2577 18” Square Side Table
Contents: Tool Required:
(2) Legs #3 Phillips Head
(1) Center Brace Screwdriver
(1) Table Top
(6) 1/4 - 20 x 2” Bolts
Assembly Instructions
1.
Place leg inside the frame underneath the
table top aligning the predrilled holes. Insert
two 1/4-20 x 2” bolts then tighten them with the
phillips screwdriver. Repeat on the other side.
2.
Place the center support brace vertically
between the legs aligning the predrilled holes.
Insert a 1/4-20 x 2” bolt thru the hole

Resumo do conteúdo contido na página número 2

Care & Maintenance Ocean Comfort products are constructed from HDPE (High Density Polyethelene), primarily a recycled material. UV inhibitors are also added to resist fading. Simply maintain your furniture by cleaning with soap and warm water to ensure its long lasting beauty. A soft bristle brush can be used on any tough to clean stains. Stainless steel hardware is used in the assembly of these products and should be rinsed regularly with fresh water if being used in a coastal environment.