Manual do usuário Weber 55355 07/31/02

Resumo do conteúdo contido na página número 1

Burner Tube Replacement Instructions
WARNING: BEFORE STARTING, TURN THE GAS OFF AT THE GAS SUPPLY, DISCONNECT
THE GAS SUPPLY AND CAREFULLY READ THESE INSTRUCTIONS BEFORE REPLACING THE
MAIN BURNERS.
STEP 1 STEP 3
®
Remove the Manifold and Valve Assembly
Remove the Cooking Grates and Flavorizer Bars
Unhook the manifold bracket(1) and unscrew the two nuts(2)
Your Weber Gas Barbecue must be OFF and cool.
that hold the manifold to the cooking box. Pull the manifold
assembly out of the burners and ca

Resumo do conteúdo contido na página número 2

5) Slide the burner assembly out from under the guide Note: The new burner tubes have an insect screen. The screw and washer(1) in the corners of the cooking box. old plastic insect screens are no longer needed. Do not loosen screws. The screws are only guides. New Old (1) 1) Slide new burner tubes back through openings in cookbox. ® 2) Insert Crossover tube into the opening at the end of outside burners (a). If you have a 3rd burner slide the notched end into the ® bracket on the Crossover tub

Resumo do conteúdo contido na página número 3

STEP 5 LP Grills Check: 1) Hose-to-manifold connection. 2) Regulator-to-Cylinder connection. Reinstall the Manifold and Valve Assembly and the  WARNING: If there is a leak at connection (1), Control Panel. retighten the fitting with a wrench and recheck for leaks with soap and water solution. If a leak persists after retightening the fitting, turn OFF Follow steps 1 through 3 in reverse order. the gas. DO NOT OPERATE THE GRILL. Contact Customer Service using the contact information sheet provid

Resumo do conteúdo contido na página número 4

Natural Gas Grills Check: (1) Check: 1) Hose to manifold connection. (2)  WARNING: If there is a leak a connection(1), retighten the fitting with a wrench and recheck for leaks with soap and water solution. If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE GRILL. Contact Customer Service using the contact information sheet (3) provided with your manual(1-800-446-1071). 2) Valves to manifold connection 3) Hose to quick disconnect connection  WARNING: If the