Manual do usuário American Standard Mirror with Medicine Cabinet 6771

Resumo do conteúdo contido na página número 1

Installation
Instructions
THE
“”
™
COLLECTION
by 6771
MIRROR/MEDICINE CABINET
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.

To ensure that your installation proceeds smoothly--please
Certified to comply with ANSI A112.18.1
read these instructions carefully before you begin.



Recommended Tools
Regular Screwdriver
10'
Drill
Tape Level
Tape Measure

REQUIRED WALL OPENING

Caution; Before cutting into any exist

Resumo do conteúdo contido na página número 2

INSTALL MIRROR/MEDICINE CABINET Note: Cabinet can be installed either right hand or left hand by rotating cabinet180 degrees. Install MIRROR/MEDICINE CABINET into finished opening in wall. Check for level and that cabinet frame fits flush against finished wall. Shim as required to make level. (Figure A) Drill two 1/8" dia. pilot holes into top and bottom of cabinet. Secure cabinet to framing with wood screws. (Figure B) PILOT HOLES Figure A Figure B INSTALL MOUNTING PLATES Note: Refer to Fig

Resumo do conteúdo contido na página número 3

INSTALL HINGES AND SIDE MIRRORS Figure A: Medicine cabinet and side mounting plates installed. Figure B: Install ESCUTCHEON (1a) and HINGE (2a) onto bottom MOUNTING PLATE (3a). Secure with MOUNTING SCREW (4). Do not fully tighten at this time. Figure C: Insert HINGE (2b) into top hinge hole of MIRROR (5). Place ESCUTCHEON (1b) onto upper MOUNTING PLATE (3b). Tape in place if necessary. Figure D: Hold MIRROR (5) with HINGE (2b) and install MIRROR (5) onto bottom HINGE (2a). Install upper HINGE

Resumo do conteúdo contido na página número 4

C/L 2 3 Cabinet 4 1 TEMPLATE TEMPLATE FOR CORNERS 1 AND 3 THE “” ™ COLLECTION by C/L OUTLINE OF MOUNTING PLATE MODEL NUMBER MARK MOUNTING 6771 LOCATION 1-15/16" C/L 2 3 Cabinet 1-3/32" 4 1 TEMPLATE TEMPLATE FOR CORNERS 2 AND 4 THE “” ™ COLLECTION by C/L MODEL NUMBER OUTLINE OF MOUNTING PLATE 6771 MARK MOUNTING LOCATION 1-15/16" 1-3/32"