Resumo do conteúdo contido na página número 1
UBW2101
3.5” LCD Portable Wireless
Baby Monitoring System
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Need Help? Get answers 24/7 at our website: www.uniden.com.
Resumo do conteúdo contido na página número 2
Important Safety Precautions This manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: x This equipment is NOT waterproof. DO NOT expose it to rain or moisture. x DO NOT immerse any part of the product in water. Do not
Resumo do conteúdo contido na página número 3
Important Safety Precautions (cont’d) Warnings to Parents and Other Users Failure to follow these warnings and the assembly instructions could result in serious injury or death. This product is not designed or intended for use as a medical monitor, nor should this product be used as a substitution for medical or parental supervision. Always be sure that both the transmitter and receiver are working properly, and are within range of each other. x STRANGULATION HAZARD. Keep the adapter cord
Resumo do conteúdo contido na página número 4
Contents Important Safety Precautions .............................................................2 What’s in the Box .................................................................................4 Parts of the Baby Monitoring System ................................................5 Getting Started .....................................................................................6 Step 1. Set-up and Installation ..........................................................6 Step 2. Basic
Resumo do conteúdo contido na página número 5
Parts of the Baby Monitoring System Camera 13 PWR. DC IN 5V/1A 1. Lens 7. Power/Lullaby play switch 2. IR (Infrared) LEDs 8. Pairing Key 3. Light Sensor 9. Reset 4. Battery Indicator 10. DC IN Jack 5. Link Indicator 11. Power Adapter 6. Power Indicator 12. Goose Neck Mount Stand LCD Monitor (Receiver) 1. Battery Indicator 9. PTT (Push to Talk)/OK 2. Power Indicator 10. Power button 3. Cursor up/Channel switch 11. SD card slot 4. Cursor left/Volume down 12. USB port (reserved use) 5. Cursor down
Resumo do conteúdo contido na página número 6
Getting Started Step 1. Connection & Installation Camera Connection 1. Connect the power cable to the camera’s DC IN jack, and then plug the power adapter to a standard 120V AC wall outlet. 2 2. Slide the power switch down once to turn ON the camera. 1 DC IN 5V/1A # The built-in Lithium-Polymer battery charges automatically when the power adapter is connected. Charge the battery to full capacity before using the monitor in portable mode. The battery is at full capacity when the
Resumo do conteúdo contido na página número 7
Getting Started (cont’d) Installing the Camera on the Goose Neck Mount Stand Use the goose neck mount stand to install the camera at an appropriate angle in a semi-permanent (desktop mount option) or permanent (wall mount option) location. # Ensure the install location is within range of a standard 120 V AC wall outlet. Desktop mount option 1. Select the position for the camera and secure the camera stand. Wall mount option 1. Select the position for the mount stand and mark out the
Resumo do conteúdo contido na página número 8
Step 2: Basic Operation (cont’d) 1) Battery Indicator Green LED: Battery charging; charge battery until green LED turns off. Red LED: Battery low (portable mode); camera will turn off within 3 minutes. Connect the power adapter for charging or continuous use. LED off: Battery fully charged. 2) Link Indicator Flashing LED: Pairing sequence is in process. See Advanced Operation - Pairing Camera section as a guide. Blue LED: Camera is picked up by the LCD monitor. LED OFF: Camera is
Resumo do conteúdo contido na página número 9
Standard View Mode Menu Mode Quad View Mode 3) View Next Camera (CH1-4) Cursor Up Hot Key CH 1 4) Volume Down Cursor Left Hot Key CH 2 5) Lullaby Play Switch Cursor Down Hot Key CH 3 6) Volume Up Cursor Right Hot Key CH 4 7) Enter Menu Mode ESC (back) 8) Manual Record Delete Record File 9) Push to Talk OK (confirm) 10) Power Button Press to turn power ON, press and hold for 2 seconds to turn power OFF. Step 3: Advanced Operation I. Get to Know the Display Icons VOX a b c d
Resumo do conteúdo contido na página número 10
Advanced Operation (cont’d) II. Get to Know the Main Menu 1. Press MENU in standard view mode to display the main menu (the example shows the menu with the Brightness option highlighted). 2. Use / / ◄ / ► to highlight a menu option.◄Press OK to enter the setting menu. 3. Use / to select a setting if necessary. 4. Press ESC to go back or exit the menu. System Setup - Time Setting Set the date and time used for Event List recording. 1. Use / / ◄ / ► to highlight a menu option.
Resumo do conteúdo contido na página número 11
Advanced Operation (cont’d) II. Get to Know the Main Menu Camera Setup - Turn Camera(s) On/Off 1. Use ◄ / ► to select the camera you want to turn off. 2. Press OK to change ON/OFF status. # Make sure available cameras are set to ON for SCAN or Quad mode. Camera Setup - Camera Scan Period 1. Use ◄ / ► to change Scan Time interval from OFF/5 sec/15 sec/ Quad. 2. Press OK to confirm the settings. # To leave Quad display, simply press Pairing - Pairing a Camera directional keys to enter single
Resumo do conteúdo contido na página número 12
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Pairing - Pairing a Camera 1. Use ◄ / ► to select a channel. 2. Press OK to start system countdown from 60 seconds. 3. Within the 60 second countdown, press PAIR at the camera side. The camera signal will display when pairing is complete. Power Saving - Power Saving Use to turn Power Saving ◄ / ► mode ON/OFF. If VOX is turned on, the receiver and camera will come out of Power Save mode when sound is detected according to
Resumo do conteúdo contido na página número 13
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) VOX Setting - VOX Sensitivity (VOX is voice activation) Use to adjust the VOX ◄ / ► sensitivity level. Level 1 - low sensitivity. Level 3 - high sensitivity. # At OFF setting, the VOX function is disabled. VOX Setting - Enable VOX Recording When set to ON, the system will auto record for 30 seconds when the camera is triggered by voice. # Please set VOX sensitivity to level 1~3 to enable use of this function. Brightness - B
Resumo do conteúdo contido na página número 14
Advanced Operation (cont’d) II. Get to Know the Main Menu (cont’d) Alarm Setup - Alarm Setup 1. Use ◄ / ► to move between the items. 2. Press OK to shift to ON/OFF. VOX alarm ON: The monitor will give an alarm for 15 seconds when the camera is triggered by voice. Battery low alarm ON: The monitor will give an alarm for 15 seconds when the camera battery is low. Out of range alarm ON: The monitor will give an alarm for 15 seconds when the monitor and camera(s) are out of wireless transmit
Resumo do conteúdo contido na página número 15
About Digital Wireless Technology This section offers some helpful information to overcome most problems you may encounter. Problem Diagnosis About 2.4GHz Digital Wireless Signal This innovative digital wireless solution integrates advanced Frequency Hopping Spread Spectrum (FHSS) technology. This technology greatly reduces the interference that comes from other devices using the same radio frequency (2.4GHz), e.g. WIFI, Bluetooth, cordless phone...etc. You can now experience improv
Resumo do conteúdo contido na página número 16
Troubleshooting Guide If you have any trouble with your baby monitor, check this section first. If you need help, visit the customer support page of our website listed on the front cover. Problems Possible Causes Remedies Check power adapter and power No power supply to cable connection, or battery has run camera (Battery low) out. Camera is not paired See pairing operation for detail. System with receiver message Move the camera closer to the shows Service out of range monitor. “NO Sig
Resumo do conteúdo contido na página número 17
Product Specification Camera Unit Monitor Unit 4 Maximum Channels Communication 500 feet (300 m) in open space Range 320 x 240 (QVGA) Resolution Operating -10˚C (+14˚F) ~ +40˚C (+104˚F) Temperature Operation Voltage DC 5V / 1A DC 5V / 1A Current 680 mA (max) 680 mA (max) Consumption 10 feet (3 m) Night Vision 2.4 in (60mm) (W) 5.1 in (130mm) (W) 4.6 in. (116mm) (H) 3.5 in (90mm) (H) Dimensions 1.3 in (32mm) (D) 1.1 in (27mm) (D) Storage Media Management SD Card Capacity Recording Time 1 GB
Resumo do conteúdo contido na página número 18
FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN) 300328. These lim
Resumo do conteúdo contido na página número 19
One Year Limited Warranty Important: Evidence of original purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORPORATION (“Uniden”). ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials & craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate & be of no further effect 12 months after the date of original r
Resumo do conteúdo contido na página número 20
20
