Resumo do conteúdo contido na página número 1
A-DLR-00- 12()
Additional Information for
Using Sony Wall-Mount Bracket (SU-WL500)
Compatible TV models for this Wall-Mount Bracket information:
KDL-60NX801/KDL-60NX800/KDL-55HX701/KDL-46HX701/KDL-40HX701/KDL-52EX707/
KDL-46EX707/KDL-40EX707/KDL-32EX707/KDL-46EX705/KDL-40EX705/KDL-32EX705/
KDL-60EX703/KDL-52EX703/KDL-46EX703/KDL-40EX703/KDL-60EX701/KDL-52EX701/
KDL-46EX701/KDL-60EX700/KDL-52EX700/KDL-46EX700/KDL-40EX700/KDL-32EX700/
KDL-40EX40B/KDL-32EX40B/KDL-46EX607/KDL-40EX607/KDL-32EX
Resumo do conteúdo contido na página número 2
Installing the Wall-Mount Bracket Install the Base Bracket and Mounting Hooks. 1 Open the Wall-Mount Bracket package and check for all the required parts along with the Instructions. 2 Decide where you want to install your TV. Refer to the TV installation dimensions table. Dimension Table (except (KDL-32EX * KDL-32EX *) only) Screen center point Unit: inches (mm) Model Name Length for each mounting angle Display Screen center dimensions dimensions Angle (0°) Angle (20°)
Resumo do conteúdo contido na página número 3
Unit: inches (mm) Model Name Length for each mounting angle Display Screen center dimensions dimensions Angle (0°) Angle (20°) 3 7 3 7 3 3 7 42 / 25 / 3 / 17 4 / 12 / 24 / 17 / KDL- 4 8 4 8 4 8 8 (1,085) (656) (95) (431) (121) (323) (616) (454) 46EX60 * 1 7 1 3 3 1 7 37 / 22 / 5 / 17 4 / 11 / 21 / 17 / KDL- 2 8 4 4 4 2 8 (952) (581) (133) (431) (120) (297) (546) (454) 40EX60 * 1 3 3 3 1 5 7 30 / 18 / 7 / 17 4 / 10 / 18 / 17 / KDL- 8 4 8 4 4 8 8 (764) (475) (185) (431) (120
Resumo do conteúdo contido na página número 4
CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV’s operating instructions for its weight. 3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. 4 Disconnect all the cables from the TV. 5 Secure the Mounting Hook to the rear of the TV. Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to the “Screw and Hook Locations Diagram/Table” s
Resumo do conteúdo contido na página número 5
KDL- EX60 * only Screw (+PSW6 × 16) Square hole Mounting Hook KDL- EX70 * only Screw (+PSW6 × 16) Before installing, remove screws Square hole Mounting Hook KDL-60NX80 * only Attach the Mounting Hook using the four Remove the bottom spacers and four cover and terminal M6 × 0 s crews cover. supplied with the TV. Mounting Hook Before installing, remove screws Spacer Screw (M6 × 20) ✍ • Place the TV on the Table-Top Stand, when securing the Mounting Hook. • When installing
Resumo do conteúdo contido na página número 6
Screw and Hook Locations Diagram/Table Model Name Screw Locations Hook Location e, j a KDL-60NX80 */KDL-60EX70 * KDL-55HX701/KDL-60EX50 */ d, g a KDL-55EX50 * KDL-46HX701/KDL-40HX701/KDL-40EX40B/ KDL-46EX50 */KDL-40EX50 */ d, g b KDL-46EX40 */KDL-40EX40 * KDL-52EX70 */KDL-46EX70 */ e, j b KDL-40EX70 */KDL-46EX60 */ KDL-40EX60 * f, j c KDL-32EX70 */KDL-32EX60 * KDL-32EX40B/KDL-32EX50 */ e, g c KDL-32EX40 */KDL-32EX30 * * I n the actual model names, the “ ” indicates numbers
Resumo do conteúdo contido na página número 7
6 Adjust the angle of the Mounting Hook using the hexagon wrench supplied with the Wall-Mount Bracket. When installing the TV parallel to the wall (0 degrees), adjustment of the Mounting Hook angle (procedures and below) is not necessary. Make sure that each arm base X is screwed in securely. R emove the two screws from the arm base X of the Mounting Hook. Choose the holes corresponding to the desired angle (5, 0, 5 o r 0 degrees). Adjust the angles of the top Y and bottom Z arm
Resumo do conteúdo contido na página número 8
9 Install the TV on the wall. Refer to the Instructions for SU-WL500. ✍ • When you put the TV back on the stand, reverse the above steps. • Remove the screws or install the Mounting Hook on a stable and level surface. Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) − 8 −
