Resumo do conteúdo contido na página número 1
OPERATOR’S MANUAL
14.4 VOLT 1/4 in. IMPACT DRIVER
R82320
Your impact driver has been engineered and manufactured to our high standards for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
1
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS n Introduction .....................................................................................................................................................................2 n General Safety Rules ................................................................................................................................................... 3-4 n Specific Safety Rules......................................................................................................
Resumo do conteúdo contido na página número 3
GENERAL SAFETY RULES n Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable better WARNING! control of the tool in unexpected situations. READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may n Use safety equipment. Always wear eye protection. result in electric shock, fire and/or serious personal Dust mask, non-skid safety shoes, hard hat, or hearing injury. protection must be used for appropriate condition
Resumo do conteúdo contido na página número 4
GENERAL SAFETY RULES n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified of this manual. Use of unauthorized parts or failure to repair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n Batteries vent hydrogen gas and can explode in t
Resumo do conteúdo contido na página número 5
SAFETY RULES FOR CHARGER tain chemicals that can damage, weaken, or destroy WARNING! plastic. READ AND UNDERSTAND ALL INSTRUCTIONS. n An extension cord should not be used unless Failure to follow all instructions listed below, may absolutely necessary. Use of improper extension result in electric shock, fire and/or serious personal cord could result in a risk of fire and electric shock. If injury. extension cord must be used, make sure: a. That pins on plug of extension cord are the
Resumo do conteúdo contido na página número 6
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n Rotational speed, at no load No Load Speed o Class II Construction Doub
Resumo do conteúdo contido na página número 7
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may CAUTION: result in minor or moderate in
Resumo do conteúdo contido na página número 8
FEATURES PRODUCT SPECIFICATIONS Motor...................................................................................................................................................................14.4 Volt DC Switch............................................................................................................................................................. Variable Speed No Load Speed ..............................................................................................
Resumo do conteúdo contido na página número 9
FEATURES KNOW YOUR IMPACT DRIVER COMPACT DESIGN See Figure 1. The short, compact design of the impact driver allows the operator to get into tight areas. Before attempting to use this product, familiarize yourself with all operating features and safety rules. BLOWS PER MINUTE This tool features an impact speed of 0-2,800 Blows Per COUPLER Minute (BPM). Blows Per Minute is the number of impacts Quickly and easily change bits without the need for separate per minute. tools. BIT STORAGE VARIAB
Resumo do conteúdo contido na página número 10
OPERATION WARNING: Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments o
Resumo do conteúdo contido na página número 11
OPERA OPERATION TION LED FUNCTION OF CHARGER See Figure 3. LED BATTERY RED GREEN ACTION INDICATOR PACK LED LED Power Without battery pack ON OFF Ready to charge battery pack Evaluate Hot battery pack Flashing OFF When battery pack reaches cooled temperature, charger begins fast charge mode Evaluate Cold battery pack Flashing OFF When battery pack reaches warmed temperature, charger begins fast charge mode Evaluate Deeply discharged Flashing OFF Charger pre-charges battery until normal volta
Resumo do conteúdo contido na página número 12
OPERATION INSTALLING BITS TO INSTALL BATTERY PACK See Figure 4. See Figure 5. n Lock the switch trigger on the driver by placing the direc- n Place the battery pack in the driver aligning raised rib on tion of rotation (forward-reverse) selector in center lock battery pack with groove in the driver's battery port. position. n Make sure the latches on each side of the battery pack n Remove the battery pack from the driver. snap into place and the battery pack is secured to the driver before
Resumo do conteúdo contido na página número 13
OPERATION SWITCH TRIGGER WARNING: See Figure 7. Do not drive a screw where there may be hidden n To turn your driver ON, depress the switch trigger. To wiring behind the surface. Contact with a “live” wire turn it OFF, release the switch trigger. will make exposed metal parts of the tool “live” and VARIABLE SPEED shock the operator. See Figure 7. This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of
Resumo do conteúdo contido na página número 14
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing use only identical RIDGID plastics are susceptible to damage from various types of replacement parts. Use of any other parts may commercial solvents and may be damaged by their use. Use create a hazard or cause product damage. clean cloths to remove dirt, dust, oil, grease, etc. WARNING: WARNING: Do not at any time let brake fluids, gasoline, Always wear safety goggles or safet
Resumo do conteúdo contido na página número 15
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting war- WHAT IS NOT COVERED ranty service. This warranty applies only to the original purchaser at retail ® and may not be transferred. This warranty only covers de- Limited to RIDGID hand held and stationary power tools fects arising under normal usage and does not cover any purchased 2/1/04 and after. This product is manufactured malfunction, failure or d
Resumo do conteúdo contido na página número 16
OPERATOR’S MANUAL 14.4 VOLT 1/4 in. IMPACT DRIVER R82320 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space provided b
