Resumo do conteúdo contido na página número 1
OPERATOR’S MANUAL
1/2 in. IMPACT WRENCH
DOUBLE INSULATED
R6300
Your impact wrench has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
1
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS n Introduction ...................................................................................................................................................................... 2 n General Safety Rules .....................................................................................................................................................3-4 n Specific Safety Rules...................................................................................................
Resumo do conteúdo contido na página número 3
GENERAL SAFETY RULES n Avoid accidental starting. Be sure switch is off WARNING: before plugging in. Carrying tools with your finger on the Read and understand all instructions. Failure to switch or plugging in tools that have the switch on invites follow all instructions listed below, may result in accidents. electric shock, fire and/or serious personal injury. n Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the
Resumo do conteúdo contido na página número 4
GENERAL SAFETY RULES n When servicing a tool, use only identical replacement SERVICE parts. Follow instructions in the Maintenance section n Tool service must be performed only by qualified re- of this manual. Use of unauthorized parts or failure to pair personnel. Service or maintenance performed by follow Maintenance Instructions may create a risk of unqualified personnel may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES n Hold tool by insulated gripping surfaces when
Resumo do conteúdo contido na página número 5
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current n No Load Speed Rotational speed, at no load o Class II Construction Doub
Resumo do conteúdo contido na página número 6
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may CAUTION: result in minor or moderate in
Resumo do conteúdo contido na página número 7
ELECTRICAL DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three-wire a power source, be sure to use an extension cord that has grounded power cord. All exposed metal parts are isolated the capacity to handle the current the tool will draw. An from the internal metal motor components with protect- undersized cord will cause a drop in line voltage,
Resumo do conteúdo contido na página número 8
FEATURES PRODUCT SPECIFICATIONS Square Drive............................................................. 1/2 in. No Load Speed .......................................1,500/1,800/min. Torque Output.................................... Maximum 450 ft. lb. Input ...............................120 V, 60 Hz, AC only, 8.5 Amps Speed Selection ...............................................Two Speed Cord Length ...............................................................12 ft. Impacts Per Minute ...
Resumo do conteúdo contido na página número 9
FEATURES KNOW YOUR IMPACT WRENCH DRIVE SHANK See Figure 1. The square 1/2 in. drive shank with detent retention pin pro- vides easy installation and removal of sockets by pushing Before attempting to use this product, familiarize yourself them on or pulling them off the shank. with all operating features and safety rules. POWER CORD SWITCH TRIGGER Your impact wrench has a 12-foot power cord. The shape The rocker-type switch trigger is located on the handle of the of the plug is designed not
Resumo do conteúdo contido na página número 10
OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. REVERSE WARNING: FORWARD Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of a
Resumo do conteúdo contido na página número 11
OPERATION INSTALLING AND REMOVING SOCKETS See Figure 4. Use only sockets designed for impact wrenches. Always se- lect the correct size impact socket for nuts and bolts. Using DRIVE SHANK the wrong size socket may damage the nut or bolt and cause the fastening torque to be inaccurate or inconsistent. SOCKET n Unplug the wrench. n Push the socket onto the drive shank until the detent pin locks it into place. n To remove the socket, pull it away from the drive TO shank. INSTALL OPERATING THE I
Resumo do conteúdo contido na página número 12
R F MAINTENANCE BRUSH CAP WARNING: When servicing use only identical RIDGID replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with BRUSH side shields during power tool operation or when ASSEMBLY blowing dust. If operation is dusty, also wear a dust mask. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial s
Resumo do conteúdo contido na página número 13
WARRANTY ® RIDGID HAND HELD AND STATIONARY POWER TOOL 3 YEAR LIMITED SERVICE WARRANTY Proof of purchase must be presented when requesting war- WHAT IS NOT COVERED ranty service. This warranty applies only to the original purchaser at retail ® and may not be transferred. This warranty only covers de- Limited to RIDGID hand held and stationary power tools fects arising under normal usage and does not cover any purchased 2/1/04 and after. This product is manufactured malfunction, failure or d
Resumo do conteúdo contido na página número 14
OPERATOR’S MANUAL 1/2 in. IMPACT WRENCH DOUBLE INSULATED R6300 Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at www.ridgid.com. The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space prov
