Resumo do conteúdo contido na página número 1
ENGLISH
MODEL
HT-SL50
SOUND BAR HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read
this manual carefully. It will guide you in operating your SHARP product.
HT-SL50 Sound Bar Home Theater system consisting of Sound Bar and Subwoofer.
Notes:
● This product is recommended for flat panel TV (LCD and plasma).
● For HDMI connection, this product only supports PCM (Pulse Code Modulation) signals.
● This produc
Resumo do conteúdo contido na página número 2
Accessories Please confirm that only the following accessories are included. RCA to headphone cable Subwoofer Stand x 2 Audio cable x 1 HDMI cable x 1 Foot cushion x 4 (1pin - 2 pins) x 1 (GITAUA004AW01) (QCNWGA062AWPZ) (QCNWGA065AWPZ) (PCUSGA189AWZZ) (QCNWGA064AWPZ) Wall Mount Angle x 2 Pattern Paper Speaker Wire Sound bar Stand x 2 Sound bar Stand (LANGKA225AW01) (TCAUHA026AWZZ) (QCNWHA043AW01) (GITAUA012AWSA) Cushion x 2 (PCUSSA190AWZZ) Special Notes NOTE This equipment has been tested and f
Resumo do conteúdo contido na página número 3
Special Notes (continued) WARNING FCC Regulations state that any unauthorized changes or ® ENERGY STAR Program Information modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. Products that have earned ® the ENERGY STAR are designed to protect the environment through superior energy efficiency. ® ENERGY STAR is a U.S. registered mark. HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or r
Resumo do conteúdo contido na página número 4
Important Safety Instructions (continued) Additional Safety Information 19) Replacement Parts - When replacement parts are 15) Power Sources - This product should be operated required, be sure the service technician has used only from the type of power source indicated on the replacement parts specified by the manufacturer or marking label. If you are not sure of the type of power have the same characteristics as the original part. supply to your home, consult your product dealer or Unauthorized
Resumo do conteúdo contido na página número 5
For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. Th
Resumo do conteúdo contido na página número 6
Precautions Warning: General The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other ● Please ensure that the equipment is positioned in a than that which is specified is dangerous and may result in well-ventilated area and ensure that there is at least a fire or other type of accident causing damage. SHARP 4" (10 cm) of free space along the sides, top and back will not be held responsible for any damage resulting from of the equipment. u
Resumo do conteúdo contido na página número 7
Controls and indicators Sound Bar 1 2 FRONT VIEW REAR VIEW 45 R R L L R R L L 3 3 Reference page 1. Left Front Speaker 4. Right Front Speaker terminal (Red/Black). . . . . . 9 2. Right Front speaker 5. Left Front Speaker terminal (White/Black) . . . . . 9 3. Bass Reflex Duct Subwoofer FRONT VIEW REAR VIEW 1 3 2 1 4 7 ACTIVE SUBWOOFER SYSTEM HT-SL50 5 2 8 6 3 4 Reference page Reference page 5 5. HDMI Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . 11 1. Stand-by Indicator 6 6. AC Po
Resumo do conteúdo contido na página número 8
System preparation Make sure to unplug the AC power lead before Using foot cushions installing the unit or changing the position. Select from three installation methods according to the preferred position. Option 1 Option 2 Using stand 1. Peel off the double sided tape separator and attach the sound bar stand cushion at the bottom surface of the Option 1 sound bar stand. Option 2 Sound bar stand cushion Sound bar stand Double Attach foot cushions as shown sided tape separator To mount the soun
Resumo do conteúdo contido na página número 9
System preparation (continued) Installing the sound bar Fixing wall mount angle 1 Fix the pattern paper to the wall in horizontal 1 Align the wall mount slot at the sound bar to the position as below. wall mount angle. 30 mm 2 Slot the sound bar into the wall mount angle. 523 mm Wall surface 3 Fix them securely. 30 mm Wall surface Pattern paper 2 Make a hole on the wall following the screw point marks on the pattern paper by using a drill. 1-1/4" (32 mm) 3/8" (8-9 mm) Wall surface 3 Fix a wall
Resumo do conteúdo contido na página número 10
ACTIVE SUBH W TO -SO L5 F0 ER SYSTEM Placing the system Installation image: Notes: ● As the sound from the system is omni-directional, you can place the speaker anywhere you like. However, it is TV recommended to place it as close to the TV as possible. ● The front panel of the speaker is not removable. Caution: ● Do not change the installation direction when the unit is turned on. Placing the stand Place the stand as shown. ACTIVE SUBWOOFER SYSTEM HT-SL50 DVD player Blu-ray Place the system as
Resumo do conteúdo contido na página número 11
System connections (continued) Connecting to TV (with HDMI) Caution: Turn off all other equipment before making this connection. Notes: ● This unit supports HDMI which enables ARC (Audio Return Channel). ● To enable ARC make sure to use High Speed HDMI cable. ● This structure also needs TV that supports ARC. ● To listen to the sound from non-ARC-compatible TV, connect the audio output from TV to this system AUDIO IN (TV) terminal. ● This unit can be operated (power on/off or volume up/down) vi
Resumo do conteúdo contido na página número 12
System connections (continued) 2. Method 2 This connection is for HDMI TV without ARC (Audio Return Channel). TV DVD, Blu-ray disc player or similar To HDMI output terminal To HDMI output terminal To HDMI To HDMI terminal input terminal 1 2 3 4 5 6 7 1 9 9 E-11 2011 February 24 HT-SL50
Resumo do conteúdo contido na página número 13
System connections (continued) Connecting a TV (with AUDIO IN (TV)) Connect to the TV using an audio cable. 1. Method 1 TV To HEADPHONE terminal Audio cable Subwoofer To AUDIO IN (TV) input terminal 2. Method 2 TV To audio output terminal RCA cable Subwoofer 1 2 3 4 To AUDIO IN (TV) input terminal 5 6 7 Note: To control the volume, some setting in the TV MENU is needed. For details refer to the operation manual of the TV. 8 Example: Go to the Setting Menu of the TV, select AUDIO OUT and ch
Resumo do conteúdo contido na página número 14
General Control Make sure to enable the HDMI CEC when making HDMI connection. To turn the power on Plug the AC power cord into an AC outlet, the stand-by indicator turns red. This unit will automatically power on if: 1. TV or similar component which supports HDMI CEC, is turned on. 2. audio signal is detected from Audio input. The stand-by indicator turns blue. Notes: ● HDMI input will override the Audio input signal. ● Audio input will function only when there is no signal from HDMI input. Audi
Resumo do conteúdo contido na página número 15
Troubleshooting chart Many potential problems can be resolved by the owner Condensation without calling a service technician. If something is wrong with this product, check the following Sudden temperature changes, storage or operation in an before calling your authorized SHARP dealer or service extremely humid environment may cause condensation center. inside the cabinet. Condensation can cause the unit to malfunction. If this happens, leave the power on until General normal playback is possibl
Resumo do conteúdo contido na página número 16
Specifications As part of our policy of continuous improvement, SHARP Soundbar speaker reserves the right to make design and specification changes for product improvement without prior notice. The Type Full Range speaker system performance specification figures indicated are nominal 7/8" x 4-1/2" (2.2 x 11.5 cm) values of production unit. There maybe some deviations Full Range from these values in individual unit. Maximum 50 W/CH input power General Rated input 25 W/CH power Impedance 4 ohms/CH
