Resumo do conteúdo contido na página número 1
Home Theater Optimized
DILA1080pHD
Installation and
Operations Manual
NOTICE: THIS PROJECTOR HAS BEEN SIGNIFICANTLY
MODIFIED AND OPTIMIZED TO PRODUCE VERY HIGH
QUALITY IMAGES USING THE FAROUDJA PROCESSOR.
ANY CHANGES MADE TO THESE SETTINGS CAN CORRUPT
THIS PROCESS. RESETTING THE OPTIMIZATION IS NOT
COVERED UNDER WARRANTY.
™
Resumo do conteúdo contido na página número 2
SAFETY PRECAUTIONS About burning-in of the D-ILA device IMPORTANT INFORMATION Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. NOTICE (For USA) Do not project video images with high-intensity or high con- Language for Manuals of Products using HID Lamps trast (that contains mercury) on a screen. The video image could be burnt into the D-ILA device. This product has a High Intensity Discharge (HID) lamp Use special care whe
Resumo do conteúdo contido na página número 3
– Slots and openings in the cabinet are provided for ventila- – The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and tion. These ensure reliable operation of the product and pro- other products (including amplifiers) that produce heat. tect it from overheating. These openings must not be blocked or covered. (The openings should never be blocked by plac- –When connecting other products such as VCR’s, and per- sonal computers, you sh
Resumo do conteúdo contido na página número 4
Safety Precaution (continued) POWER CONNECTION POWER CONNECTION (United Kingdom only) WARNING: Do not cut off the main plug from this equipment. WARNING: If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then Do not cut off the main plug from this equipment. obtain an appropriate safety approved extension lead or adapter or consult your dealer. If the plug fitted is not suitable for the power points in your If nonetheless the m
Resumo do conteúdo contido na página número 5
Caution About Burning-in of D-ILA Device Maintenance Procedures ● Do not allow the same still picture to be pro- ● Clean dirt on the cabinet jected for a long time or an abnormally bright with a soft cloth. In case of heavy soiling, soak a cloth in video image to be projected. neutral detergent diluted with water, wring dry and wipe, Do not project video images with a high intensity or high followed by wiping again using a dry cloth. contrast on a screen. This video image could be burnt ● Pay at
Resumo do conteúdo contido na página número 6
Contents SAFETY PRECAUTIONS ..........................................2 Adjustments and Settings Using Menus .............22 Menu Structure..................................................................22 Caution ......................................................................5 Menu Operation Buttons ................................................... 23 Accessories ..............................................................6 Procedures for Menu Operation ............................
Resumo do conteúdo contido na página número 7
Controls and Features Front Side/Top Surface/Left Side 1 Backup Control Panel 6 Remote Sensor (Front) Use in case IR remote cannot be used. When operating with the remote control, Panel is located behind metal plate. aim it towards this sensor. (☞ Page 17) •A remote sensor is also located on the rear of the unit. 2 AC Power Input Terminal This is the AC power input terminal. Connect the 7 Focus Ring supplied power cord to this terminal. (☞ Page 19) Turn manually to focus the projected image. (☞
Resumo do conteúdo contido na página número 8
Controls and Features (continued) Rear Side/Right Side/Bottom Surface 3 4 2 1 Bottom Surface 5 6 6 7 Blocked as it is not in use. Opening it forcibly will cause damage to the unit. 1 Connection Panel 5 Front Adjustable Foot (for adjusting height and Access panel by removing four screws and removing angle) side panel. It is set at the lowest position when shipped from the factory. 2 Lamp Cover The foot can be adjusted to a maximum angle of +6° Remove this cover when replacing the lamp. and a maxi
Resumo do conteúdo contido na página número 9
Connector Panel 1324 SYNC OUT SERVICE RS-232C DVI CONTROL VIDEO IN 1 [SYNC OUT] Terminal 3 [RS-232C] Terminal (D-sub 9 Pin) This terminal is intended for servicing purposes. Do not This is the RS-232C interface-specific terminal. This use it. unit can be controlled by a computer connected Using it may give rise to error or malfunction of the unit. externally. (☞ Page 18) ● For details, please check with your authorized dealer. 2 [SERVICE] Terminal 4 [DVI] Terminal (DVI-D 24 Pin) This terminal is
Resumo do conteúdo contido na página número 10
Controls and Features (continued) Control Panel 1 6 STAND BY LAMP TEMP OPERATE 7 2 8 EXIT MENU 9 3 ENTER 4 10 PRESET HIDE 5 11 1 [TEMP] Indicator 7 [OPERATE] Indicator Blinking: Indicates that temperature inside this unit is ab- Light on: When this unit is in operation (during projec- normally high. (☞ Pages 11, 33) tion). (☞ Page 20) 2 [LAMP] Indicator 8 [OPERATE] Button Light on: Indicates that lamp has been used for more When this unit is in the standby mode, pressing this than 1900 hours. (☞
Resumo do conteúdo contido na página número 11
Indicator Display on the Control Panel In addition to the standby mode, operate mode and cool down mode*, this unit also displays other operational states using different combination of indicators. 1 2 ● Please refer to Page 28 for explanations on warning indication for * and Page 33 for * . [STAND BY] light on [OPERATE] light on [STAND BY] blinking Unit is in standby mode Unit is in operate mode (during opera- Unit is in cool down mode (when cooling tion (projection)) lamp) STAND BY STAND BY ST
Resumo do conteúdo contido na página número 12
Controls and Features (continued) Remote Control 5 [MENU] Button Press this button to display the menu. Pressing this 1 button when the menu is displayed clears the menu. (☞ Pages 23, 24) 6 Cursor [///] Buttons ON OFF Use these buttons when adjusting the menu items. OPERATE 2 8 (☞ Pages 23, 24) 3 FOCUS LIGHT TEST 9 7 [PRESET] Button 4 Use this button to reset the values to factory settings MENU EXIT 5 10 when the “Gamma”, “Color temp.”, “Mask” or “Picture shift” item in the menu is selected.
Resumo do conteúdo contido na página número 13
Loading Batteries into the Remote Control Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries. 1 Open the back cover Precautions for Using Batteries Press the back cover slightly and slide it in the direction of If batteries are incorrectly used, they may crack or leak. This the arrow. could cause fire, burn, malfunction, and staining or damag- ing of the surroundings. Beware of the following: • Do not mix new and old batteries. • D
Resumo do conteúdo contido na página número 14
Installing the Projector Precautions for Installation Please read the following carefully when installing this unit. Installation Environment Precaution for Usage This unit is a precision device. Do not install it at the following This unit uses a light-source lamp which reaches high tem- places. Doing so may cause fire or malfunction of the unit. perature when projecting. Please do not use it in the follow- • Where there is water, humidity or dust ing ways. Doing so may cause fire or malfunctio
Resumo do conteúdo contido na página número 15
Projector and Screen Installation The optimum image can be obtained when the center of this unit lens and the screen are placed perpendicular to each other. Take note of the projection angle when placing them. Failing to do so may give rise to trapezoidal distortion of the projected image. ● This unit does not come with a function to correct trapezoidal distortion. When viewed from the left (or right) When viewed from the top (or bottom) Mounting this Unit When mounting of this unit is requi
Resumo do conteúdo contido na página número 16
Installing the Projector (continued) Screen Size and Projection Distance ● This unit uses a 1.3x manual zoom lens for projection. ● Although the focusable projection distance is about 1.5 m to 12 m, the projection distance recommendable for performance is about 2 m to 8 m. Install this unit within this range and adjust the screen size when the aspect ratio of the screen is 16:9. Screen Installation Screen Relationship Between Projection Distance and Projection Screen Size Projection Screen S
Resumo do conteúdo contido na página número 17
Effective Range of Remote Control Unit The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen. ● If the fluorescent lamp is lit, the remote control unit might not function properly. When reflecting off a screen Ensure that total of distance A between this unit and screen and distance B between remote control and screen is within 7 m. ● As the effect of signals reflected f
Resumo do conteúdo contido na página número 18
Connecting to Various Devices Connecting to Devices Before connection, be sure to turn off both the projector and the device to be connected. Connecting to digital video processors ● Read the manual that is supplied with the digital video processor thoroughly. ● The signal may attenuate and the image may become unstable depending on the DVI cable. Use the high quality DVI cable below 5 m. When using DVI cable above 5 m, use a split system or optical fiber cable. Right Side of this unit DVI Con
Resumo do conteúdo contido na página número 19
Connecting the Power Cord (supplied) After all devices have been connected, connect the supplied power cord. 1 Connect the supplied power cord to the power in- put terminal of this unit 1 2 Insert the main plug of the supplied power cord into the wall outlet 2 Power Cord (supplied) Cautions Against Fire and Electric Shock ● Since the power requirement of this unit is high, insert the power plug directly into a wall outlet. ● When not using devices, remove the power plug from the wall outlet. ● D
Resumo do conteúdo contido na página número 20
Basic Operation Procedures If setting for this unit is not completed, please refer to “Adjustments and Settings Using Menus”(☞ Page 22) upon turning on the power and perform the required setting accordingly. Once the basic setting is completed, this unit can be used by simply performing the following operation procedures. 1 Turning on the power 1 Insert the power plug to the power outlet. ● The main power turns on and the [STAND BY] indicator on the unit lights up. Light on STAND BY LAMP TEMP OP
