Manual do usuário Draper 220V Access Electric Projection Screen

Resumo do conteúdo contido na página número 1

Installation/Operating Instructions
220V Access Electric Projection Screen by Draper
These Installation/Operating Instructions are available in the offi cial language
➄ Front, back and top of case must be straight—not forced to warp or bow.
of the country where you purchase the product. Please contact your distributor
➅ If case is painted on location, removal of roller/fabric assembly is
to request a copy.
recommended prior to painting. If not removed, slot on bottom of case
Vous pourriez d

Resumo do conteúdo contido na página número 2

220V Access by Draper page 2 of 4 220V & 12V VIDEO INTERFACE CONTROL—(Not CE Approved) Allows Motorized Roller/Fabric Installation screen to be con trolled by a trigger signal—when the signal comes on, the The bottom access panel must be removed fi rst. screen de scends automatically. Two versions: Model VIC220 in te grates screen The motor end mounting bracket has a metal bracket with snap ring for operation with a DRAPER video projector lift or a video projector or tuner with accepting mot

Resumo do conteúdo contido na página número 3

220V Access by Draper page 3 of 4 Case Dimensions Mount ing hard ware Mounting brackets slide supplied by 22.86 left and right as needed. cm others 17.78 2.22 2.54 cm cm cm 16.83 2.22 cm cm 5.4 slot L 20.3 cm Series E or M Series V Access L Engagement bracket (one on each end Series E 17.8 cm of the bottom access panel) clicks into place with the ball detent on each endcap Series V Varies 30mm 54mm 120mm Wiring Diagrams Mounting Bracket Dimensions Single Station Control Multiple

Resumo do conteúdo contido na página número 4

220V Access by Draper page 4 of 4 Low Voltage and Remote Control Terminal strip in junction box at left end of screen Red-to screen (directional) Brown-to screen (directional) White-Common to screen, 230V AC Black-to 230V AC Yellow-to 230V AC Green-Ground Dashed wiring by electrician Low voltage wiring by others Eye Port for IR Eye, RF Receiver or LED All-Pole Disconnect Switch For more than one of these, by Others STOP a splitter is required. 3 Button Wall Switch DOWN - Black STOP COM - White