Resumo do conteúdo contido na página número 1
INSTALLATION/OPERATION
ICI1000PIM
Personality Interface
®
Module
C1005M-G (10/02)
Resumo do conteúdo contido na página número 2
GENERAL UNPACKING INSTRUCTIONS Unpack and inspect all parts carefully. The following items are supplied: 1 ICI1000PIM Personality Interface Module ® 1 RJ-14 cable for Inter-Check and the DX2000 DVR 1 RJ-45 coupler for the DX2000 DVR DESCRIPTION The ICI1000PIM Personality Interface Module (PIM) is a data protocol translator that translates data from cash registers and other devices for use with Pelco’s Inter-Check or DX2000 Digital Video Recorder (DVR). Inter-Check is an automatic text insertion
Resumo do conteúdo contido na página número 3
INSTALLATION NOTE: The information in this manual is for PIM software version 4.02 and above. INSTALLATION FOR INTER-CHECK Refer to the ICI1000S Inter-Check manual as you install the ICI1000PIM. 1. Configure DIP switch bank 1 on the PIM (refer to Configuring DIP Switch Bank 1 section). 2. Configure DIP switch bank 2 on the PIM (refer to Configuring DIP Switch Bank 2 section). 3. Locate the 16-pin connector on your register/interface. Plug the register/interface connector into the PIM. 4. Plug o
Resumo do conteúdo contido na página número 4
TO INTER-CHECK UNIT STRAIGHT-THROUGH PHONE CABLE WHITE BLUE BLACK YELLOW RED GREEN USER-SUPPLIED CABLE, 18 AWG, SHIELDED WIRE IS SUGGESTED FROM ICI1000PIM WHITE BLUE BLACK YELLOW RED GREEN Figure 2. Configuration for Wiring ICI1000PIM Module 4 C1005M-G (10/02)
Resumo do conteúdo contido na página número 5
INSTALLATION FOR DX2000 DVR AND DX2000DH DATA HUB Refer to Figure 3 and the DX2000 Digital Video Recorder Installation/Operation Manual (C690M) and DX2000DH Data Hub Manual (C698M) as you install the ICI1000PIM. 1. Configure DIP switch bank 1 (refer to the Configuring DIP Switch Bank 1 section) for the device to which you are interfacing. 2. Configure DIP switch bank 2 (refer to the Configuring DIP Switch Bank 2 section) for the device to which you are interfacing. 3. Locate the 16-pin connector
Resumo do conteúdo contido na página número 6
CONFIGURING DIP SWITCH BANK 1 The switches in this bank serve several purposes. Selections include polling or non-polling operation, PIM addressing, clock signal manipulation, and ICI1000PIM graphics mode selection. The following describes the DIP switch settings for bank 1 on the ICI1000PIM. (Refer to Figure 4 and Tables A and B). NOTE: If data is garbled or non-existent and you have set the DIP switches correctly for your register, try setting switch 1 on bank 1 to the opposite position of th
Resumo do conteúdo contido na página número 7
Table A. PIM Address Settings for Switch Bank 1 + = OPEN (FLIP THE SWITCH DOWN) – = CLOSED (FLIP THE SWITCH UP) SWITCH # 45678 POLLING PIM ADDRESS (PIM #) – –––– 1 –––– + 2 ––– + – 3 –––+ + 4 –– + –– 5 –– + – + 6 – – + + – 7 –– + + + 8 – + – – – 9 – + – – + 10 – + – + – 11 – + – + + 12 – + + – – 13 – + + – + 14 – + + + – 15 – + + + + 16 + –––– 17 + – – – + 18 + – – + – 19 + – – + + 20 + – + – – 21 + – + – + 22 + – + + – 23 + – + + + 24 + + – – – 25 + + – – + 26 + + – + – 27 + + – + + 28 + + + –
Resumo do conteúdo contido na página número 8
Table B. Cash Register/Interface Configurations + = OPEN (FLIP THE SWITCH DOWN) X = POLLING/NON-POLLING R = RECEIPT (Normally CLOSED = – ) – = CLOSED (FLIP THE SWITCH UP) – = POLLING – = JOURNAL + = NON-POLLING + = SELECT G = GRAPHICS (Normally CLOSED = – ) Register/Interface Type Bank 1 Switch Bank 2 Switch 123 12345678 CASIO TK-2000 Dot Matrix Printer + X G - - - + + + - - CASIO TK4300 Dot Matrix Printer + X G - - - + + + + - CASIO TK1200/TK2600/TK4600/CE4115/CE4630 Dot Matrix Printer + X G -
Resumo do conteúdo contido na página número 9
Table B. Cash Register/Interface Configurations (Continued) Register/Interface Type Bank 1 Switch Bank 2 Switch 123 12345678 PANASONIC JS-6500 Dot Matrix Printer - X G + - - + + - + + RCALLEN RC204 Drum Printer + X - + - - + - + + + RUBY VERIFONE/RS-232 Standard Serial Printer + X + + - - - + - - + SAMSUNG 4900, 4915, 4940 Dot Matrix Printer (Version 3 or 4) - X G - - + - - + + - SANYO ECR 580,690,720 EPSON 220F Dot Matrix Printer + X G + - - + + - + - SHARP A430 DP630 Dot Matrix Printer - X G
Resumo do conteúdo contido na página número 10
SPECIFICATIONS ELECTRICAL Power Input Voltage: 120 VAC, 60 Hz to wall mounted transformer (5 VDC, 300 mA from transformer to ICI1000PIM) Connectors: One 16-pin interface connector One RJ-14 modular data connector One transformer power connector DIP Switches: Two eight-position DIP switches GENERAL Construction: Black plastic cover Environment: Indoor Operating Temperature: 32° to 120°F (0° to 49°C) Weight: Unit Shipping 1.80 lb (0.82 kg) 3.0 lb (1.36 kg) Dimensions: 0.75" H x 4.94" W x 2.75" D (
Resumo do conteúdo contido na página número 11
WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or (559) 292-1981 to workmanship for a period of one year after the date of shipment. Exceptions to this warranty are obtain a Repair Authorization number (RA), and provide the following information: as noted below: 1. Model and serial number • Five years on Pelco manufactured camer
Resumo do conteúdo contido na página número 12
® World Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 Orangeburg, New York Las Vegas, Nevada Eindhoven, The Netherlands Wokingham, United Kingdom Montreal, Canada
