Manual do usuário Heath Zenith HEATH CB-2011

Resumo do conteúdo contido na página número 1

OPERATION
Mode: On-Time: Works: Day Night
Test 5 Sec x x
Motion Sensor
Auto 1, 5, 20 min. x
Manual Until Dawn* x
Light Control with
* resets to Auto Mode at dawn.
1
Note: When first turned on wait about 1 / minutes for
2
Protective Lamp
the circuitry to calibrate.
TEST
Shields
Put ON-TIME switch on the sensor ON-TIME
Model CB-2011
bottom to TEST.
Features TEST 1 5 20
• Turns on lighting when motion is detected.
AUTO
• Automatically turns lighting off.
ON-TIME
• Photocell keeps the lighting of

Resumo do conteúdo contido na página número 2

❒ Twist the junction box wires and fixture wirestogether INSTALLATION as shown. Secure with wire connectors. For easy installation, select an existing light with a wall Mounting switch for replacement. White to Black to Strap White 1234567890123456789 Black 1 23456789012345678 9 1234567890123456789 Rubber Plug Wall Mount Eave Mount For under eave installation, the sensor head must Mounting be rotated as shown in the next two steps for proper Bolt operation and to avoid the risk of electrical s

Resumo do conteúdo contido na página número 3

T S O O B ❒ Loosen the clamp screw in Clamp TEST AND ADJUSTMENT the sensor ball joint and gen- Screw ❒ Turn on the circuit breaker and light switch. tly rotate the sensor. 1 ❒ Walk through the coverage NOTE: Sensor has a 1 /2 minute warm up period Ball area noting where you are before it will detect motion. When first turned Joint 1 when the lights turn on. Move on or when switching modes wait 1 /2 minutes. the sensor head up, down, ❒ Turn the RANGE control to the mid position and the or sidew

Resumo do conteúdo contido na página número 4

TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE SYMPTOM POSSIBLE CAUSE Lights will 1. Light switch is turned off. Lights stay 1. A flood lamp is positioned too close to not come 2. Flood light is loose or burned out. on continu- the sensor or pointed at nearby ob- on. 3. Fuse is blown or circuit breaker is turned ously. jects that cause heat to trigger the off. sensor. (Reposition the lamp away 4. Daylight turnoff is in effect (recheck from the sensor or nearby objects.) after dark). 2. Light Contr