Resumo do conteúdo contido na página número 1
ADEMCO LYNXR Series
Security Systems
LYNXR/LYNXR24 and LYNXR-EN
Installation and Setup Guide
ARMED
READY
OFF
1 2
3
ESCAPE RECORD VOLUME
PLAY
AWAY
4 5
6
ADD LIGHTS ON TEST
BYPASS
STAY
7 8
9
DELETE LIGHTS OFF CODE
CHIME
AUX
0
#
SELECT STATUS NO DELAY
FUNCTION
K5963V3bx 5/04 Rev. A
Resumo do conteúdo contido na página número 2
RECOMMENDATIONS FOR PROPER PROTECTION The Following Recommendations for the Location of Fire and Burglary Detection Devices Help Provide Proper Coverage for the Protected Premises. Recommendations for Smoke and Heat Detectors With regard to the number and placement of smoke/heat detectors, we subscribe to the recommendations contained in the National Fire Protection Association's (NFPA) Standard #72 noted below. • Early warning fire detection is best achieved by the installation of f
Resumo do conteúdo contido na página número 3
Table of Contents SYSTEM FEATURES...............................................................................................................................................4 MOUNTING THE CONTROL..................................................................................................................................5 WIRING CONNECTIONS........................................................................................................................................6 AC
Resumo do conteúdo contido na página número 4
System Features LYNXR and LYNXR-EN are not intended for UL985 Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. U U U U L L L L Powerline Carrier Devices are not UL Listed for fire or burglary functions and are intended for home automation. The LYNXR-Series controls are self-contained, rechargeable wireless control/communicators that feature easy installation and usage. A built-in speaker provides voice annunciation of system status alon
Resumo do conteúdo contido na página número 5
Mounting the Control Wall Mounting The illustration below shows the front assembly separated from the back plate. DO NOT disconnect the ribbon cable from the terminal strip board. Disconnect the cable only from the front assembly board. Certain features differ between the LYNXR/LYNXR24 and the LYNXR-EN models. Verify the specific model ! being installed prior to programming the system. LOCKING TABS 1. Separate the front assembly from the back plate by pressing on the two lock
Resumo do conteúdo contido na página número 6
Wiring Connections Wiring Overview The following summarizes the connections required. Refer to the Wiring Connections paragraph and the Summary of Connections diagram on the inside back cover when making connections. HARDWIRE ZONE LONG RANGE RADIO Supports 1 EOLR supervised zone using either closed Compatible with the ALARMNET 7845C and 7720 circuit or open circuit sensors. Devices. TWO-WAY VOICE POWERLINE CARRIER DEVICES The LYNXR-EN supports the two-wa
Resumo do conteúdo contido na página número 7
} } Wiring Connections Wiring Connections INCOMING PHONE LINE 2. Make Phone Line Connections - For local or full line RING TIP seizure proceed to the appropriate steps below. Local Seizure RED GREEN 45 3 6 a. Connect the incoming phone line to either the TO 8-position jack or terminals 2 (TIP) and 3 (RING) on PREMISES PHONES RJ31X RING the Lynx. TIP 2 7 b. Connect the handset phone lines to either the RJ11 BROWN GREY 1 8 jack or terminals 4 (TIP) and 5 (RING). DIRECT Full Line Sei
Resumo do conteúdo contido na página número 8
Wiring Connections ALL OUTPUT CIRCUITS ARE POWER LIMITED. WARNING: TO PREVENT RISK OF SHOCK DISCONNECT TELEPHONE LINE AAV / LRR AT TELECOM JACK BEFORE TRIGGER SERVICING THIS UNIT. (LYNXR/LYNR24) LRR EARTH TRIGGER GROUND PHONE ZONE (LYNXR-EN) SOUNDERS PLCD AC 11 12 13 14 15 8 1 2 3 4 5 6 7 8 9 10 16 POS RJ11 JACK DATA TIP RING TIP RING (+) ( ) ( ) (+) ( ) (+) SYNC OUT IN HARD WIRED TO INCOMING ZONE HANDSET PHONE PHONE LINE LINE LOCAL SOUNDER DISABLE SHUNT REMOVE TO DISABLE TRIGGER SIGNAL
Resumo do conteúdo contido na página número 9
AC Power and Backup Battery The system is powered by a 9VAC, 15VA Plug-in Transformer, ADEMCO 1332/1332X10 (1332CN in Canada). Refer to the wiring table below for wire gauge and length. Distance from Transformer Wire Gauge Use only the provided ADEMCO 1332/1332X10 or 1332CN Transformer to Control Up to 75 feet #20 75 to 150 feet #18 150 to 300 feet #16 Wiring to the AC Transformer must not exceed 300 feet using 16-gauge wire. The voltage reading between terminals 15 an
Resumo do conteúdo contido na página número 10
AC Power and Backup Battery AC Power and Rechargeable Backup Battery The LYNXR Series is equipped with an integral, replaceable, rechargeable battery pack composed of six (6) rechargeable 1.2-volt nickel-metal hydride batteries. Select the appropriate battery pack, based on the installation’s requirement, and install the battery pack. Model/Part Number Battery StandbyTime Low Battery Notification LYNXRCHKIT-SC 4-hours (minimum) Approximately 1-hour before battery depletion LYNXRCH
Resumo do conteúdo contido na página número 11
1 2 3 4 5 6 7 8 9 0 # * • Installing Wireless Zones General Information Zones: The control supports up to 24 wireless zones using 5800 Series transmitters, and up to 16 wireless buttons. Range: The built-in RF receiver can detect signals from wireless transmitters within a nominal range of 200 feet. Transmitters: 5800 Series transmitters have built-in serial numbers that must be entered into the system using the ✻56 or ✻83 interactive mode, or input to the contr
Resumo do conteúdo contido na página número 12
OFF ON Installing Wireless Zones Transmitter Battery Life • Batteries in the wireless transmitters may last from 4–7 years, depending on the environment, usage, and the specific wireless device being used. Factors such as humidity, high or low temperatures, as well as large swings in temperature may all reduce the actual battery life in a given installation. The wireless system can identify a true low battery situation, thus allowing the dealer or user of the system time to arrange
Resumo do conteúdo contido na página número 13
1:15:0 1:13: OFF ON (Green) (Red) (Yellow) ARMED READY 1 2 3 1 2 4 5 6 7 8 9 4 3 5 0 # * 7 8 6 * 0 9 # Installing Wireless Zones 5800 Series Transmitter Loop Numbers (Refer to this information when programming transmitters) The following illustration shows the compatible transmitters, their associated input types and loop designations. LOOP 4 LOOP 3 LOOP 3 LOOP 2 YOU MUST ENROLL LOOP 4 LOOP 4 LOOP 4 YOU MUST THIS YOU MUST LOOP 2 YOU MUST LOOP 2 ENROLL BUTTON ENR
Resumo do conteúdo contido na página número 14
Mechanics of Programming General Programming Information Programming options are stored in non-removable, electrically erasable, nonvolatile EEROM memory. The system can be programmed at any time, even at the installer's premises prior to the actual installation. Simply apply power temporarily to the Control and then program the unit as desired. There are two programming modes: • Data field programming (used for setting various system options) • Interactive menu mode programming
Resumo do conteúdo contido na página número 15
Zone Response Type Definitions General Information During programming, you must assign a zone type to each zone, which defines the way in which the system responds to faults in that zone. Zone types are defined below. Zone type 00 is used to program a zone that is not used. Type 00 Zone Not Used Zone type 01 is usually assigned to sensors or contacts on primary entry and exit Type 01 doors. Entry/Exit Burglary #1 Zone Characteristics: • Entry delay #1 is programmable from 0-99
Resumo do conteúdo contido na página número 16
Zone Response Type Definitions Type 07 Zone type 07 is usually assigned to a zone containing an Emergency 24-hour button (audible emergency). Audible Zone Characteristics: Alarm • Sends a report to the central station, and provides alarm sounds externally and at the keypad. Zone type 08 is usually assigned to a zone containing a button for use Type 08 in personal emergencies or to a zone containing monitoring devices 24-hour (i.e.: water or temperature sensors, etc.). Auxi
Resumo do conteúdo contido na página número 17
Data Field Descriptions Defaults (where applicable) are Indicated in Text. The following pages list all data fields in this Control (in numerical order). Use the blank programming form to record the data for this installation. Note that both keypad LEDs flash while in Programming mode. Note: Entering a number other than the one specified will give unpredictable results. The Installer Code is used to enter the 4-digit Master Security Code. See Installer Code 20 ✻ "Master Code" in
Resumo do conteúdo contido na página número 18
Data Field Descriptions The system will wait the time entered before sounding alarm upon entering Entry Delay 01 ✻35 if system is not disarmed. UL installations: must be set for a maximum of 00-99 = entry delay time in seconds. 45 seconds The system will wait the time entered before sounding alarm upon Entry Delay 02 ✻36 entering. UL installations: must be set for a maximum of 45 seconds 00-99 = entry delay time in seconds. Exit Warning: Sound consists of slow continuous be
Resumo do conteúdo contido na página número 19
Data Field Descriptions Field 46: Enter up to 24 digits. Do not fill unused spaces. Enter 0-9, #+11 for ‘*’; #+12 for’#’; #+13 for a pause (2 seconds). This option allows the user to schedule a time driven message. When “Follow Me Reminder” Phone Number ✻46 activated the system will dial the phone number programmed and deliver a Enter up to 24 digits. voice message (custom words 72, 73 and 74). This option is only supported when the pager or follow me feature is enabled in field
Resumo do conteúdo contido na página número 20
Data Field Descriptions If enabled, provides communication delay to the central station and allows 15-Second Dialer Delay (Burglary) ✻50 the subscriber time to avoid a false alarm transmission. Delay does not 0 = no dialer delay apply to zone type 6, 7, 8, and 9 alarms, which are always sent as soon as 1 = provide 15-second delay of burglary alarm report they occur. UL installations: must be 0 (no delay) when armed away ✻ Test report code entered in field 64 is sent. Period
