Resumo do conteúdo contido na página número 1
TAY AWA
ARMED READY
AWAY 1 2 3
STAY 4 5 6
7 8 9
PAGE #
0
R
FA560
S
Y
OFF
ASS BYP
TEST
MAX
CHIME
CODE
ANT INST
READY
OFF
ON
OFF
Y
S
MAX
TEST
ASS BYP
ANT INST
CODE
CHIME
READY
R
K5305-5PR 7/01
R
FA260
ARMED READY
3
A 1 2
B 4 5 6
8 9
C 7
D 0 #
TAY AWA
Resumo do conteúdo contido na página número 2
TO ENTER PROGRAMMING MODE: Local programming requires the use of an alpha keypad connected to the keypad terminals on the control. ✱ 1. POWER UP, then depress [ ] and [#] both at once, within 50 seconds of powering up. OR 2. Initially, key: Installer Code (default = 4112) plus 8 + 0 + 0. (if ✱ 98 was used to exit previously, see paragraph below. To Exit Programming Mode Data Field Programming Procedures Task Procedure ∗ Go to a Data Field Press [ ] + [Field Number], followed by the required en
Resumo do conteúdo contido na página número 3
Entry of a number other than one specified will give unpredictable results. Values shown in brackets are factory defaults. Entries shown in dashed boxes indicate partition entries for FA168C only (not applicable for FA148CP). Field Function Data Entries Programmable Values ✱ ✱ SYSTEM SETUP ( 20– 29) ✱ 4 digits, 0–9 20 INSTALLER CODE | | | [4112] ✱
Resumo do conteúdo contido na página número 4
NOTE: Entry of a number other than one specified will give unpredictable results. ✱ For fields *43-*46: Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; #+15 for F. Enter [ ] as the fourth digit if a 3-digit account number (for 3+1 dialer ✱ reporting format) is used. Enter 0 as the first digit of a 4-digit account number for Nos. 0000-0999. Exit field by pressing (and press next field number) if only 3 digits are used. E.g., For Acct. B234, enter: #+11| 2 | 3 | 4 See box above
Resumo do conteúdo contido na página número 5
✱ 67 RF XMTR LOW BAT REPORT CODE | [00] See box on previous page. UL: must be enabled if wireless devices are used ✱ 68 CANCEL REPORT CODE | [00] See box on previous page. ✱ ✱ RESTORE REPORT CODES ( 70 – 76) ✱ 70 ALARM RESTORE RPT CODE [0] See box on previous page. ✱ 71 TROUBLE RESTORE RPT CODE | [00] See box on previous page. ✱ 72 BYPASS RESTORE RPT CODE | [00] See box on previous page. ✱ 73 AC RESTORE RPT CODE | [00] See box on previous page. ✱ 74
Resumo do conteúdo contido na página número 6
✱ ✱ DOWNLOAD INFORMATION ( 94, 95) ✱ 94 DOWNLOAD PHONE No. | | | | | | | | | | | | | | | | | | | ✱ Enter up to 20 digits, 0–9; #+11 for ' '; #+12 for '#'; #+13 for a 2-second pause. Do not fill unused ✱ spaces. If fewer than 20 digits, exit field by pressing (and press 95, if entering next field). To clear ✱ ✱ entries from field, press 94 . UL: downloading may be performed only if a technician is at the site. ✱
Resumo do conteúdo contido na página número 7
CONFIGURABLE ZONE TYPE OPTIONS (*182-*185) ✱ 182 CONFIGURABLE ZONE TYPE 90 123456789 10 Enter the appropriate value for each entry, 1-10, based on the charts provided on next page. Each entry is the sum of the values of its selected options (0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15). UL: Do not configure zones as a fire alarm or UL burglar alarm zone. ✱ Enter the desired 3-digit Contact ID® report codes for 183 ZONE TYPE 90 REPORT CODE
Resumo do conteúdo contido na página número 8
Configurable Zone Types Worksheets Configurable zone types 90 and 91 can be programmed via downloader software or from a keypad using data fields*182-*185. Configurable zone types 92 and 93 (FA168C only) can only be programmed using the downloader software. Programming Configurable Zone Type options involves making 10 entries in data field *182 for zone type 90 and field *184 for zone type 91, where each entry represents the sum of the values of the various options shown in the tables below. Use
Resumo do conteúdo contido na página número 9
*56 ZONE PROGRAMMING WORKSHEET (FA148CP supports up to 32 zones: 1-6, 9-34) [default shown in brackets] ZoneZn Type Part.Report Input Type Loop R Tim sp. eSerial No. Location 1 [09] [1] [HW] [1] 2 [01] [1] [HW] [1] 3 [03] [1] [HW] [1] 4 [03] [1] [HW] [1] 5 [03] [1] [HW] [1] 6 [03] [1] [HW] [1] 7 [03] [1] [HW] [1] 8 [03] [1] [HW] [1] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 [1] [BR] 49 50 [1] [BR] 51 [1] [BR] [1] [BR] 5
Resumo do conteúdo contido na página número 10
*57 FUNCTION KEY PROGRAMMING Option Function A B C D Comments 01 Paging 02 Time Display 03 Arm AWAY 04 Arm STAY 05 Arm NIGHT-STAY 06 Step Arming 07 Device Activation Device: 08 Comm. Test 09 Macro Key 1 10 Macro Key 2 11 Macro Key 3 12 Macro Key 4 00 Emergency Keys: Personal Emergency Silent Alarm Audible Alarm Fire Emergency Keys: A = [1] / [∗] B = [∗] / [#] C = [3] / [#] ∗79, ∗ ∗ OUTPUT RELAYS/POWERLINE CARRIER DEVICES WORKSHEET FOR 80 and 81. Applicable only if Relays and/or Powerline Carrie
Resumo do conteúdo contido na página número 11
✱ 80 OUTPUT DEFINITIONS Fill in the required data on the worksheet below and follow the programming procedure in the installation manual as you enter the data during the displays and prompts that appear in sequence. Notes: 1. For Relays, 4229 and 4204 devices are programmed in *79, *80, and *81 modes. ✱ 2. For Powerline Carrier devices (plcd), field 27 must be programmed with a House Code. 3. Tampers of expansion units cannot be used to operate devices. Output Activation Type and Detail Part
Resumo do conteúdo contido na página número 12
Zone Type Definitions Use this zone type if the zone is not used. Type 00 Zone Not Used Type 01 • Assign to zones that are used for primary entry and exit. • Provides entry delay if the control is armed in the Away or Stay modes. Entry/Exit Burglary #1 • No entry delay is provided when the panel is armed in the Instant mode. • Entry delay #1 is programmable from 0 to 99 seconds for each partition. • Exit delay begins whenever the control is armed, regardless of the arming mode selected, and is ✱
Resumo do conteúdo contido na página número 13
• Arms the system in Away mode when the zone is activated. Type 21 • Pushbutton units send the user number to the central station when arming or disarming. Arm-Away • User code for button must be assigned. • Disarms the system when the zone is activated. Type 22 • User code for button must be assigned. Disarm • Can be used on a zone when an output relay action is desired, but with no accompanying alarm (e.g., Type 23* lobby door access). No Alarm Response • Usually assigned to all sensors or con
Resumo do conteúdo contido na página número 14
ALPHA VOCABULARY LIST (For Entering Zone Descriptors) 000 (Word Space) • 057 DOOR – L – – R – – V – • 106 LAUNDRY • 059 DOWN 155 RADIO 209 VALVE – A – 210 VAULT • 107 LEFT • 156 REAR • 001 AIR • 060 DOWNSTAIRS 212 VOLTAGE 108 LEVEL 061 DRAWER 157 RECREATION • 002 ALARM • 109 LIBRARY • 062 DRIVEWAY 159 REFRIGERATION 004 ALLEY – W – • 110 LIGHT 160 RF 005 AMBUSH • 064 DUCT 213 WALL 111 LINE • 161 RIGHT 214 WAREHOUSE • 006 AREA – E – • 113 LIVING • 162 ROOM • 007 APARTMENT • 216 WEST • 065 EAST •
Resumo do conteúdo contido na página número 15
5800 Series Transmitter Input Loop Identification • All of the transmitters illustrated below have one or more unique factory assigned input (loop) ID codes. Each of the inputs requires its own programming zone (e.g., a 5804's four inputs require four programming zones). • Transmitter inputs entered as: "RF" (Supervised RF) Type send periodic check-in LOOP 3 LOOP 2 signals, as well as fault, restore and low battery signals. LOOP (REED) LOOP 2 1 (REED) The transmitter must remain within the rece
Resumo do conteúdo contido na página número 16
_ _ } } _ _ + } + + + R A DIVISION OF PITTWAY CORPORATION 175 Eileen Way, Syosset, NY 11791 Copyright © 2001 Pittway Corporation K5305-5PR 7/01 8-PIN CONNECTOR 4219 4-WIRE USED FOR 4300/1321X10 24-HR BATTERY STANDBY REQUIRED FOR BATTERY FUSE RELAY WIRED EXPANSION MODULE SMOKE DETECTOR TRANSFORMER FIRE INSTALLATIONS. USE 12V, 17.2AH FOR REPLACEMENT, PROGRAM RELAY (8 ADD'L EOLR WIRED ZONES) CONNECTIONS 3A BATTERY FOR 600mA AUX POWER. SEE AS ZONE TYPE 54 USE SAME VALUE CO
