Resumo do conteúdo contido na página número 19
4.2.2 GPS setting: .G PS Cold Start: Click “Cold Start” in Win_Tool or just press and hold the function and track buttons simultaneously, and then power on the device, it will be restarted by cold start mode. .G PS parameters setting: .1 Fi x Mode: Select the GPS positioning mode. .2 2D Fi x Altitude: Set the “fixed altitude” used when the fix mode is 2D. .3 Ini tial Min. SVs: Set how many GPS satellites used for the initial positioning. .4 Ini tial Signal Min Strength: Set the
Resumo do conteúdo contido na página número 20
4.2.3 Language selection of operation interface: Support English, Chinese Traditional, Chinese Simplified. 4.2.4 Shake mode (power saving) setting: To enable the Shake mode, the device will be power off when there is no movement after 5 minutes (default); and the device will be power on automatically when it moves. To disable Shake mode, device will be never power off automatically. And if you turn it off manually while shake mode is enable, then the shake mode will be disabled simultane
Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Table of contents Part 1 Product introduction 2 Part 2 Features 3 Part 3 Safety notes 4 Part 4 User’s guide 5 Part 5 Operation notes 10 Part 6 Access Tool 12 Part 7 Trouble shooting 27 1
Resumo do conteúdo contido na página número 3
Part 1 Product introduction Overview Power button: Function button: Ø Press and hold Ø Press and hold 1. Power on/off. 1. Normal mode To enter Ø Temporarily press the setting mode. 1. Normal mode To cycle Ø Temporarily press through the various 1. Normal mode To information of Easy reset the accumulation Showily. of Kilometer and 2. Setting mode To Counter. confirm the option of 2. Setting mode To set setting items and then and switch among each back to normal m
Resumo do conteúdo contido na página número 4
Part 2 Features Easy Showily is a Autoshow Track Logger with internal antenna. ublox ATR0625 used in its core is hightech component and included function of autolog record of journey. USB interface ensures easy linking with computer to read the log data or programming it any where without install any driver or software. The GPS acquisition status, the last record of time and position could all be stored in nonvolatile memory. The Easy Showily not only has 16 GPS channels but also po
Resumo do conteúdo contido na página número 5
Part 3 Safety notes GPS (Global Positioning System) is provided by the United States government. Its accuracy may varies depending on special conditions (area at war or if it is blocked). Any control by USA will affect this system and its accuracy. If installed on the transportation device, driver must not operate this while driving. GPS performance is affected when satellite coverage is degraded as near a highrise building, in the tunnel or under a cover. Personal replacement of comp
Resumo do conteúdo contido na página número 6
Part 4 User’s guide Package: Easy Showily (Autoshow Track Logger) AAA alkaline battery *2 USB extensive cable (15cm) *1 User’s manual. Easy Showily Operation: Press and hold “Power” button to power on it. The LCD will show up the main screen to confirm it is in the normal mode and GPS start acquisitioning. After power on, press and hold “Power” button to turn the power off. “FIX” show up in the upper right of main screen indicates GPS acquisition is done. If not, the GPS acquisi
Resumo do conteúdo contido na página número 7
avoiding worse GPS performance or unworking. In the normal mode, temporarily press “Power” button to change the information showed on LCD. A Heading and speed information (after positioning) Press “Function” button to change the information from speed to altitude. B Kilometer accumulated at present C Counter accumulated at present Press “Function” button to switch the following 3 accumulative value of counter. Total amount of counter. Amount of motion counter.
Resumo do conteúdo contido na página número 8
D Average speed at present E latitude and longitude at present (after positioning) or last positioning (before positioning) (When the first time use or after cold start) F Local time at present: (Based on the zone set by user) (When the first time use or after cold start) In the normal mode, press and hold “Function” button will enter the setting mode and then the LCD will show up setting information. In the setting mode, temporarily press “Power” button or no operation more than 15
Resumo do conteúdo contido na página número 9
In the setting mode, temporarily press “Track” button to switch setting value showed on the second line of the screen. The setting value would be confirmed when you skip to the other setting category or back to normal mode. 1. LOG Mode Setting: Walk mode, Bicycle mode, Car mode, User define mode. 2.Shake mode (power saving) function 3. Show the usage capacity of the record: If you want to reset the accumulative value of Kilometer and counter, please enter the inform
Resumo do conteúdo contido na página número 10
minutes, its power will be turned off (that interval can be set by yourself), until the device with movement again. The Easy Showily will not auto power on/off while shake mode is disable. And if you turn it off manually while shake mode is enable, then the shake mode will be disabled simultaneously. When the USB is used as interface: Turn the Easy Showily power off. Connect Easy Showily to USB port of computer. The builtin access tool (Win_Tool) will execute automatically, and then
Resumo do conteúdo contido na página número 11
Part 5 Operation notes Easy Showily will do selfcheck once it is powered. GPS start to work when LCD shows up the main screen. GPS automatically starts acquisition and autologs. If sky is clear overhead, it requires only 34 sec for acquisition. (If the data in its memory is still valid, it needs only 4~33 sec). After acquisition, Easy Showily starts record the track. For the first time if it is placed at the area well exposed to the satellite signal, this device requires approx 13 min
