Resumo do conteúdo contido na página número 1
HDD Navigation System with 7" Wide TFT Display and DVD/MS Multi-Source Receiver
MODEL
INSTALLATION MANUAL
Be sure to read this installation manual thoroughly prior to installation and making connections. If
installation methods or non-standard parts not specified in this installation manual are used, accidents
or injury may result.
Professional installation is recommended, contact the place of purchase to schedule an appointment.
After reading the owner's manual and the installation manual thoro
Resumo do conteúdo contido na página número 2
Components Check that all of the following components are present Components Check that all of the following components are present Main unit components 1 Main unit Interconnecting cable Interconnecting cable Interconnecting cable 2 3 4 x 1 (Power and speaker connector) (Speed pulse, parking, (E-lan etc) (16P) x 1 reverse,video, etc) (16P) x 1 (20P) x 1 Antenna cable Bezel Mounting sleeve Side bracket 5 6 7 8 x 1 x 1 x 1 x 2 Case Splicing connector Flat head screw 9 10 11 12 (For detachable
Resumo do conteúdo contido na página número 3
For your safety in using the AVN7000 For your safety in using the AVN7000 Warnings and caution signs, illustrated bellow, are posted throughout this manual as well as on the AVN7000. They show safe and correct ways to handle the product to prevent personal injury to you and others and avoid damage to property. Before reading through the manual, take time to read through and learn the important information listed in this section. This "Warning" sign indicates a situation in which incorrect handli
Resumo do conteúdo contido na página número 4
• • Do not place the vinyl storage bag over a person's • • Do not operate the product in a malfunctioning head. It may cause a serious accident or death by condition, for instance, when the audio does not play. suffocation. Doing so may result in an accident, fire, or electrical shock. • • Do not disassemble or rebuild this product. Doing so may cause an accident, fire, or electrical shock. • • If an abnormal situation occurs, such as foreign matter entering or liquid splashing on the product, o
Resumo do conteúdo contido na página número 5
Installation Diagram Installation Diagram 14 GPS antenna (When installing inside the vehicle) Tip 14 GPS antenna (When installing outside the vehicle) Main unit 1 Tip • •If installing the GPS antenna inside the vehicle, the location and the slope of the vehicle's windshield will determine the accuracy of the GPS antenna to receive the GPS signal. If the GPS antenna location inside the vehicle is hindering the accuracy of the GPS antenna, then you may want to install the antenna outside of the ve
Resumo do conteúdo contido na página número 6
Name and functions of terminals Name and functions of terminals • • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, accidents may result. If
Resumo do conteúdo contido na página número 7
2 3 4 Wire colors and connection points for connection cables and and Never connect the power supply to the speaker leads (No.6 and No.7), otherwise it will cause damage to the main unit. Caution 1 B+ (Yellow) Connect where power is constantly available, regardless of the ignition key's position. 2 ACC (Red) Connect where the power comes on when the ignition is in the ACC position. 3 Illumination power supply (Orange/White) Connect to where power comes on when the vehicle light switch is turned
Resumo do conteúdo contido na página número 8
NAVI-VOICE output terminal A Connect to the NAVI-VOICE input terminal of an external device such as a DCU105 (sold separately). B Digital output terminal Connect to the digital input terminal of an external device such as a DCU105 (sold separately). C VTR input terminals Connect the output cable of external video equipment such as a VTR. Yellow : Video signal White : Audio (left) signal Red : Audio (right) signal VTR output terminals D Connect to the monitor with video input. Yellow :
Resumo do conteúdo contido na página número 9
- Vehicle connections - Tip • •You will need to purchase the necessary component adapter cable for the vehicle so that the power supplies can be utilized. (Contact the dealer for further details.) • • Be sure to wrap the connection cables with plastic tape to insulate them. - Example of using vehicle adapter cables - Vehicle harness Power supplies for combined products From main unit Vehicle component adapter cable - - 9
Resumo do conteúdo contido na página número 10
Connecting the vehicle speed pulse, parking Connecting the vehicle speed pulse, parking brake, and reverse cables (wires) brake, and reverse cables (wires) Notes on installation • • Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the connections. If the cables are incorrectly connected, accidents or problems with correct operation may result. • • The label on the vehicle speed pulse signal cable contains a protection circuit, so do not cut t
Resumo do conteúdo contido na página número 11
- A connecting the point for parking brake (example) - Hand-operated Use a splicing connector to connect the parking 1 Parking brake brake signal cable (red/white) coming from the main unit to the parking brake signal cable of the vehicle. Route the parking brake signal cable to the main 2 unit. Attach a splicing Parking brake connector at this location. Signal Cable Parking brake signal cable Foot-operated Parking brake - A connecting point for the reverse signal (example) - Tip Attach a splici
Resumo do conteúdo contido na página número 12
Light Green H/A MUTE Pink TEL MUTE System connection example System connection example • • Never cut the insulation on the power cable or use it to power any other equipment. If the rated current capacity of the power cable is exceeded, fire and electric shocks may result. • • The cables should be secured with tape or a similar securing method to prevent any obstructions while driving. If they get wound or entangled around components such as the steering wheel, shifting lever, or brake pedal, ac
Resumo do conteúdo contido na página número 13
FROM EXTERNAL VIDEO EQUIPMENT (remove cap when using extenal VIDEO EQUIPMENT) Yellow TO BATTERY+12V (Permanent Supply) Tip • • Install and connect all of the peripheral units before connecting them to the main unit. • • Do not remove any of the protective caps (RCA, etc.) unless in use. • • Be sure to wrap the connection cables with tape (PVC tape) to insulate them. DIGITAL OUT POWER CONNECTOR (Do not remove cap) CABLE (supplied with CH3083) CH3083 (sold separately) ANTENNA EXTENSION CABLE INT
Resumo do conteúdo contido na página número 14
TO EXTERNAL MONITOR (remove cap when using extenal MONITOR) H/A MUTE Light Green Pink TEL MUTE NO CONNECTION (Do not remove cap) These speaker cables are not used when connecting a DCU105 (sold separately). System connection example System connection example AVN7000 + DCU105 + HDR105 + TVR105 + CH3083 INTERCONNECTING CABLE (supplied with DCU105) These speaker cables are not used when connecting an external amplifier. If not using an external amplifier, connect the INTERCONNECTING CABLE front a
Resumo do conteúdo contido na página número 15
FROM EXTERNAL VIDEO EQUIPMENT (remove cap when using extenal VIDEO EQUIPMENT) Yellow TO BATTERY+12V (Permanent Supply) Tip*1 - Speaker connection examples- For a front 3-way speaker system For a front 1-way speaker system To center speaker (with amplifier) or To center speaker To external amplifier external amplifier To external amplifier (with amplifier) or To external amplifier external amplifier To sub woofer To external anplifier (with amplifier) or external To exte
Resumo do conteúdo contido na página número 16
Installing the GPS antenna Installing the GPS antenna Notes on installation • •The cables should be bound together with tape or a similar securing method (example: wire ties) so that they do not interfere with driving. If it becomes wound or entangled around parts such as the steering wheel, shifting lever, or brake pedal, accidents may result. • •Do not install the GPS antenna where it will obstruct the driver's vision or where it will be an obstacle while driving, otherwise traffic accidents m
Resumo do conteúdo contido na página número 17
- Installation inside the vehicle (example) - Choose an installation location on the dashboard 1 which is flat and has a clear view of the sky. Tip 16 Ground plate 14 GPS antenna • • Select a location that is at least 20 in. away from the main unit. If this is not done, the GPS measurement precision will drop. • • Be sure to use the ground plate when installing the GPS antenna. If the ground plate is not used, the reception sensitivity will drop and will affect the accuracy of the position measu
Resumo do conteúdo contido na página número 18
- Installation outside the vehicle (example) - Choose an installation location where the GPS 1 antenna can be attached securely. Remove the backing paper from the body 2 GPS antenna 14 protective sheet and attach the sheet to the Body protective 17 sheet (clear) vehicle. Install the GPS antenna on top of the body 3 protective sheet. Front of vehicle Waterproof cushion Route the GPS antenna cable inside the vehicle's 15 4 trunk and secure it with clamps. Attach the waterproof cushion so that the
Resumo do conteúdo contido na página número 19
Installing the main unit Installing the main unit - Installation angle - Tip Front To maintain proper function, the unit must be mounted less than 30 degrees. If the angle is in excess of 30 degrees, DVD/CD skipping and improper DVD/CD and Memory Stick ejection may occur. 30˚ or less Level (reference) - Installation preparation- Tip Caution In the event that the main unit requires shipping, re- Caution label attach the caution label to help prevent potential damage that may be caused by shippin
Resumo do conteúdo contido na página número 20
Metal of vehicle Insert the main unit into the mounting sleeve until 4 it locks in place. Dashboard or console box Fasten the rear of the main unit. 5 Install the bezel on the main unit. 6 7 Mounting sleeve 6 Bezel -Mounting the main unit (If installing the main unit using the side brackets of the vehicle)- Tip Center cluster panel Connect all cables before installing the main Pocket, etc unit. Remove the pocket and any other accessories 1 from the center cluster to make room for the main unit.
