Resumo do conteúdo contido na página número 1
OWNER'S MANUAL
AVN2210p
In-Dash Portable Navigation with
CD/USB Multi-Source Receiver
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.
Resumo do conteúdo contido na página número 2
For your Safety in Using the AVN2210p Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the AVN2210p. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage. Please read through the "Warning" and "Caution" notes before reading the owner's manual for operational features and functions. This sign indicates a situation in which incorrect handling or disregard Warning of this sig
Resumo do conteúdo contido na página número 3
WARNING ● Do not place foreign objects in the disc insertion slot or USB input terminal. Fires or shocks may result. ● Do not disassemble or alter this main unit. Accidents, fires or shocks may result. ● Do not let water or foreign objects enter the internal parts of this main unit. Smoke, fires or shocks may result. ● Do not use when main unit is malfunctioning (the screen is not lit or no sound comes out). Accidents, fires or shocks may result. ● Always replace fuses with fuses of identical c
Resumo do conteúdo contido na página número 4
Operating Precautions Notes on Operation For your safety, play only at moderate volumes in order to hear exterior sounds. Discs with the logo shown to the left can be played. You can play music CDs (CD-R/CD-RW) on this player. Be sure to use discs that have been properly processed. Depending on the editing format and software used, some discs may not play properly. TEXT Do not insert anything
Resumo do conteúdo contido na página número 5
Basic Operation Adjusting Sound Muting the Volume Press the [MUTE] button. 1 To cancel muting, either press the [MUTE] button again or turn the [VOL] rotary knob to the right. While the audio system is muted, navigation voice guidance continues unmuted. Setting Guide Tone Press the [FUNC] button to establish the FUNCTION mode. 1 Press the [FUNC] button until the indication on the sub display switches to 2 BEEP. Press the [SELECT (Right/Left)] button to switch between ON and OFF statuses 3 for BE
Resumo do conteúdo contido na página número 6
Switching Audio Control Modes Modes will switch in the order shown below each time the [ENTER] button is 1 pressed. BASS MID TREB BAL FAD NON-F NF-P LPF LOUD SVC BASS ... Turn the [VOL] rotary knob to the right or left in the audio mode while referring to the table below to adjust the sound. Mode Function [VOL] rotary knob/Function Turn to the right Emphasizes low sounds. BASS Adjusts bass level. Turn to the left Softens low sounds. Emphasizes mid range Turn to the right
Resumo do conteúdo contido na página número 7
Mode Function [VOL] rotary knob/Function LPF ON : Only allow lower Turn to the right frequencies (low range) through. LPF Adjust frequency (Low Pass Filter for LPF OFF : filtering settings. Sub-Woofer output) Allow all frequencies Turn to the left through regardless if the frequencies are low or high. Accentuate low and high frequencies Turn to the right ON when the volume is low. LOUD (LOUDNESS) When loudness is ON, the apparent deficiency in the high Turn to the left OFF sounds is
Resumo do conteúdo contido na página número 8
Turning the PND Display ON and OFF While the PND display is OFF, press the [SCREEN] button. 1 The PND display will come ON. Press the [SCREEN] button for longer than a second while the PND display is 2 ON. The PND display will go OFF. ● Note ● For details on using PND, refer to the operation manual of the PND. Switching Between Left and Right Speaker Output for the Navigation Voice Voice guidance speaker output can be switched between right and left speaker. Press the [SOURCE/PWR] button for mor
Resumo do conteúdo contido na página número 9
How to Operate the Tuner Calling up Preset Channels Press the [MODE] button to select the preset channel mode. 1 Turn the [VOL] rotary knob to call up the station registered for a preset channel. 2 Press the [ENTER] button. 3 The registered preset channel will be selected and the corresponding station will be received. Six stations can be memorized for each of FM 1, 2 and 3, and six stations can be memorized for AM, making a total of 24 stations. Calling up a Preset Channel from the PND Display
Resumo do conteúdo contido na página número 10
The selected station is memorized and the preset registration number and frequency are indicated on the display. To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel. If the stations have been stored in memory, pressing a switch from [1] to [6] will tune to that preset station. CAUTION If the vehicle's battery is disconnected (for repairs to the vehicle or for removing the main unit), all stations in memory will be lost. In such
Resumo do conteúdo contido na página número 11
ATTENTION Pressing the preset switches ([1] to [6]) allows you to make one-touch station selections. The frequency of the selected station is displayed on the preset switch. When a new station is set in memory, the station previously set in memory will be deleted. If there are fewer than six receivable stations, the stations set in the remaining switches will remain unchanged. CAUTION If the vehicle's battery is disconnected (for repairs to the vehicle or for removing the main unit), all
Resumo do conteúdo contido na página número 12
How to Operate the CD/MP3/WMA Player About Compact Discs The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: Do not leave an ejected disc in the disc slot for very long; the disc may warp. Discs should be stored in their cases and kept away from high
Resumo do conteúdo contido na página número 13
XXXX XXXX NO GOOD Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for "improving sound performance" or "protecting CDs." The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. Please be sure NOT to attach any ring-shape protector (or other accessory) to your discs. Those protectors are commercially available and said to protect disc and to improve sound quality (and antivibration effect), but they c
Resumo do conteúdo contido na página número 14
About MP3/WMA ATTENTION The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3/WMA? MP3/WMA (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3/WMA a file can be compressed to one-tenth the size of the original. TM WMA (Windows Media Audio) is format for audio compression technolo
Resumo do conteúdo contido na página número 15
Media Media capable of playing MP3/WMA includes CD-R and CD-RW discs. Compared to CD-ROM media commonly used for music discs, CD-R and CD-RW discs are fragile in high temperature/high humidity environments and one section of the CD-R and CD-RW may become incapable of playback. Fingerprints or scratches on the disc may prevent playback or cause skipping during playback. Sections of a CD-R and CD-RW may deteriorate if left inside a vehicle for long periods of time. It is also recommended that CD-R
Resumo do conteúdo contido na página número 16
Multi-Sessions Multi-sessions are supported, and playing of CD-R and CD-RW discs with annotated MP3/WMA files is possible. However, when "Track at once" has been written, close the session or process the warning message. Standardize the format of each session without changing the format. Playing MP3/WMA When a disc with recorded MP3/WMA files is inserted, the main unit first checks all the files on the disc. No sound is output while the main unit is checking the files on the disc. It is recommen
Resumo do conteúdo contido na página número 17
Writing to CD-R/CD-RW MP3/WMA files can be recorded on CD-R/RW by using a CD-R/RW drive connected to a computer. Record by setting the recording format of the recording software to ISO9660 level 1 or level 2 (not including extension format). Select CD-ROM ( mode1 ) or CD-ROM XA ( mode2 ) for the disc format. When Playing Back CD-R/RW Insert a CD-R/RW disc having recorded MP3/WMA files. The system will automatically determine whether the disc is a music CD or a CD-R/RW with MP3/WMA files and beg
Resumo do conteúdo contido na página número 18
Skipping to the Next Track (File)/Returning to the Beginning of a Track (File) Press the [SELECT(Right/Left)] button. 1 Right: Advances to the next track (file). Left (pressing once): Returns to the beginning of the track (file) being played. Left (pressing more than two times): Returns to the previous track (file). FAST FORWARD/REWIND Press the [SELECT(Right/Left)] button for more than one second. 1 Right: Fast forward. Left: Rewind. Random Track Order Press the [FUNC] button while a CD track i
Resumo do conteúdo contido na página número 19
Press the [ENTER] button. 3 RAND ONE... Play the files in the folder being played in a random order. RAND ALL... Play the files in all folders in a random order. Repeat Track Press the [FUNC] button while a CD track is being played to switch to RPT on 1 the sub display. Press the [SELECT (Right/Left)] button to select RPT ON or OFF. 2 Right: ON Left: OFF Press the [ENTER] button. 3 The track being played is played again. Repeat File/Folder Press the [FUNC] button while an MP3/WMA file is being p
Resumo do conteúdo contido na página número 20
Scan Files/Folders Press the [FUNC] button while an MP3/WMA file is playing to switch to SCAN on 1 the sub display. Press the [SELECT (Right/Left)] button to select the scan setting. 2 Press the [SELECT(Right/Left)] button to switch the mode in the following sequence: Right: SCAN ALL Left: SCAN ONE Press the [ENTER] button. 3 SCAN ALL... Play the first ten seconds of the first file in each folder. SCAN ONE... Sequentially play the first ten seconds of all files in the folder being played and al
