Manual do usuário Land Pride TREKER 4200/4400 NT/ST

Resumo do conteúdo contido na página número 1

Trailer, Fifth Wheel
Assembly Instructions
Manual No. 701-154M
Treker 4200/4400 NT/ST and 4210/4410 ST Series
Before You Start
Assembly Instructions
A detailed listing of parts for this accessory kit is provided
When you see this symbol, the subsequent
on page 4. Use the list as a checklist to inventory parts
instructions and warnings are serious - follow
!
received. Please contact your local Land Pride dealer for
without exception. Your life and the lives of
any missing hardware.
others depend

Resumo do conteúdo contido na página número 2

Land Pride Assembly Instructions Must Pivot At These two Points Two Machine Bushings (# 18) 3. Place the Pivot Tube (#3) between the front support rails as shown in the picture above and attach using one of the 3/8" x 2-1/4" Bolts (#12) and Nylock Locknuts provided. Tighten fully and then back off turn or just until the Pivot Tube (#3) can rotate inside the support rails. 4. Install one of the 3/8" 2-1/2" Lock Pins (#8) in the rear hole of the Pivot Tube (#3) as shown and then attach the Trailer

Resumo do conteúdo contido na página número 3

Land Pride Assembly Instructions 5. The hitch comes already assembled. Mount the Hitch (#1) in the manner that will position the trailer pin hole at 11 inches or more from the ground. Note: On most machines the hitch will be mounted as shown above. 6. Make sure the Hitch (#1) is straight in line with the center of the Machine. First tighten the 3/4" x 2" Bolt (#14) just enough to take out the free play. Then tighten the 5/16" Eyebolt (#9) until it actually begins to draw the Hitch (#1) into the

Resumo do conteúdo contido na página número 4

Land Pride Listing of Parts Kit No. 701-034A BACK SCREEN NT Item Part No. Part Description Qty 1 PTL102 HITCH 1 2 PTL103 TRAILER TONGUE 1 3 PTL104 PIVOT TUBE 1 4 PTL105 TRAILER BED 1 5 PTL106 BED EXTENSION 1 6 PTL107 TAIL GATE 1 7 805-212C PIN WIRE SNAP LOCK 3/8 X 2 1/2 2 8 EB516WD 5/16" EYE BOLT WELDED 1 9 804-010C WASHER FLAT 5/16 USS PLT 1 10 802-131C HHCS 5/16-18X3 GR5 4 11 802-114C HHCS 3/8-16X2 1/2 GR5 2 12 SP34-14 5/16"X3/4"X1/4" NYLON SPACER 4 13 802-064C HHCS 3/4-10X2 GR5 1 14 804-025C