Resumo do conteúdo contido na página número 1
Use & Care Guide
Manual de Uso y Cuidado
English / Español
Model/Modelo: 119.16145210
Item / Artículo: 640-03982741-5
Kenmore®
Liquid Propane Gas Grill
Parilla a gas de propane liquido
P/N MCDLPTM000
Sears Brands Management Corporation
Hoffman Estates, IL 60179 U.S.A
www.kenmore.com
www.sears.com
www.kmart.com
™
Resumo do conteúdo contido na página número 2
If you smell gas: For residential use only. Do not use for commercial cooking. 1. Shut off gas to the appliance. 2. Extinguish any open flame. Installation Safety Precautions 3. Open lid. Use this grill, as purchased, only with LP (propane) 4. If odor continues, keep away from the gas and the regulator/valve assembly supplied. appliance and immediately call your gas Grill installation must conform with local codes,
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS WARRANTY KENMORE GRILL WARRANTY For Your Safety………………………………………….2 Grill Information Center………………………………....2 One Year Full Warranty on Kenmore Grill Product Record Information……………………………..2 If this grill fails due to a defect in material or Safety Symbols………………………………………….2 workmanship within one year from the date of Installation Safety Precautions………………………......2 purchase, call 1-8 00-4-MY-HOME® to arrange for Kenmore G
Resumo do conteúdo contido na página número 4
LP Tank USE AND CARE The LP tank used with your grill must meet the following requirements: Use LP tanks only with these required measurements: 12” (30.5cm) (diameter) x 18” (45.7cm) (tall) with 20 lb. (9kg.) capacity maximum. NEVER store a spare LP cylinder under or LP tanks must be constructed and marked in near the appliance or in an enclosed area. accordance with specifications for LP tanks of the U.S. Department of Transportation (DOT) or for Canada, CAN/CSA-B3
Resumo do conteúdo contido na página número 5
LP Tank Exchange Connecting Regulator To The LP Tank 1. LP tank must be properly secured onto the grill. Many retailers that sell grills offer you the option of replacing your empty LP tank through an exchange (Refer to assembly section.) service. Use only those reputable exchange 2. Turn all control knobs to the OFF position. companies that inspect, precision fill, test and certify 3. Turn LP tank OFF by turning the OPD hand wheel their tanks. Exchange your tank only for an OPD
Resumo do conteúdo contido na página número 6
For Safe Use of Your Grill and to Avoid Serious Do not insert any tool or foreign objects into Injury: the valve outlet or safety relief valve. You Do not let children operate or play near your may damage the valve and cause a leak. grill. Keep pets away from your grill. Leaking propane may result in explosion, fire Keep grill area clear and free from materials severe personal injury, or death. that burn. If a
Resumo do conteúdo contido na página número 7
Safety Tips ▲ Before opening LP cylinder valve, check the coupling nut for tightness. ▲ Before each use, check the gas hose for excessive Do not preheat the grill on HIGH with the lid abrasion or wear, or cuts. Replace a hose assembly closed for longer than 15 minutes. Preheating showing those signs with the hose assembly specified the grill with the lid closed beyond this point in the parts list before using the grill. Inspect the hose can result in excessive cooking temp
Resumo do conteúdo contido na página número 8
Turn controls and gas source or tank OFF when not in use. Turning Grill Off Turn all knobs to OFF. Turn LP cylinder OFF by turning the hand-wheel clockwise to a full stop. If ignition does NOT occur in 5 seconds, turn the Igniter Check burner controls OFF, wait 5 minutes and repeat Turn gas off at LP cylinder. Press and hold electronic the lighting procedure. If the burner does not ignitor button. A “clicking” sound should be heard ignite with the valve open,
Resumo do conteúdo contido na página número 9
Stainless Steel Surfaces: To maintain your grill’s high Cleaning the Burner Assembly Follow these instructions to clean and / or replace parts quality appearance, wash with mild detergent and of the burner assembly or if you have trouble igniting the warm soapy water and wipe dry with a soft cloth grill. after each use. Baked on grease deposits may require the use of an abrasive plastic cleaning pad. Use only 1. Turn gas off at control knobs and LP tank. in direction of brushed finish
Resumo do conteúdo contido na página número 10
Storing Your Grill Grilling Tips and Tricks Food cooked on the grill is either done using direct or Clean cooking grates. indirect cooking. Direct cooking is when the food is Store in a dry location. cooked directly over lit burners. Food is placed in- Remove battery from electronic ignition. between the lit burners for indirect cooking. If LP cylinder is connected to the grill, then the grill Direct: Use direct cooking to sear meats. This helps to must be stored outdoors in a
Resumo do conteúdo contido na página número 11
Hardware Pack Listing F A Phillips Head Bolt M6x10mm Grill Transport Handle Heat Shield Qty: 11pcs Qty: 2pcs Part No. ：MCDKY18000 Part No. ：FP0027 G B Phillips Head Screwdriver Flat Head Bolt M6x25mm Qty: 4pcs Qty: 1 pc Part No. MCDKY15000 Part No. ：MCDKY20000 H C Step Head Bolt M6 Battery Size AA Qty: 4pcs Qty: 1 pc Part No. ：MCDKY16000 I D Flat Head Bolt M6x12mm Propane Tank Support Ring Hook Qty: 8pcs Qty: 1 pc Part No. ：MCDKY17000 Part No. ：
Resumo do conteúdo contido na página número 12
Parts List Part No Description Key Qty A1 1 HCDLCVA038 Hood Assembly A2 2 *ASMA0014-03 Hood Bolt A3 1 MCDKCVW000 Thermometer B1 1 HCDLBDA148 Firebox Assembly B2 1 SC0096 Gas Manifold Assembly B3 2 S7007-026D-018 Shelf Right Front / Left Back Support B4 2 S7007-026D-017 Shelf Left Front / Right Back Support B5 1 S1036-026D-016 Control Panel Left Support B6 1 MCDKADD000 Regulator and Hose Assembly B7 1 S1036-026D-017 Control Panel Right Support B8 3 SD0050-A "I" Burner B9 1 *AS
Resumo do conteúdo contido na página número 13
Parts List Key Qty Part No Description C4 1 HCDKBTA048 Cabinet Bottom Base C5 2 FE0080 Wheel C6 2 FE0154N Adjustable Foot C7 1 S4061-000B-001 Propane Tank Support Chain Hook C8 1 SE0232-001 Propane Tank Support Chain C9 1 MCDKADA025 Gas Manifold Bracket C10 1 MCDKFRH015 LP Tank Bracket C11 1 MCDKADG000 Regulator Hose Support Chain D1 1 HCDKTBJ035 Left Shelf Assembly D2 1 HCDKTBL035 Right Shelf Assembly D3 1 MCDKTBK035 Shelf Left Control Panel D4 1 MCDKTBM035 Shelf Right Control
Resumo do conteúdo contido na página número 14
Parts Diagram 14
Resumo do conteúdo contido na página número 15
Assembly Instruction Install Cabinet Left Side and Right Side Panels 1 Attach Cabinet Left and Right Side Panels to the Cabinet Base using 6 Phillips Head Bolts (M6x10mm). Do not fully tighten bolts at this time. Phillips Head Bolt M6x10mm Qty: 6 Install Cabinet Front Panel and LP Tank Bracket 2 Attach Cabinet Front Panel to the Cabinet Left and Right Side Panels using 4 Washer Head Bolts (M4x10mm) at the top and bottom holes. Attach Front Panel so that end with center hole
Resumo do conteúdo contido na página número 16
Attach Propane Tank Support Chain and Propane Tank Support Chain Hook 3 Attach the Propane Tank Support Chain to Cabinet Left Side Panel using 1 Washer Head Bolt (M4x10mm). Attach the Propane Tank Support Chain Hook to Cabinet Right Side Panel using 1 Washer Head Bolt (M4x10mm). Propane Tank Support Chain Hook Qty: 1 Washer Head Bolt M4x10mm Qty: 2 Install Hood and Firebox Assembly 4 Remove Regulator and Hose Assembly from underside of Hood a
Resumo do conteúdo contido na página número 17
Attach Hood and Firebox Assembly to Cabinet Assembly and Install the Regulator Hose Support 5 Chain Attach the Hood and Firebox Assembly to the front of the Cabinet Side Panels using 2 Phillips Head Bolts (M6x10mm). Attach the Regulator Hose Support Chain (located on the regulator hose) to the back of the Cabinet Side Panel using 1 Washer Head Bolt (M4x10mm). Phillips Head Bolt M6x10mm Qty: 2 Washer Head Bolt M4x10mm Qty: 1 Install Grease Pan Bracket and Grease Pan
Resumo do conteúdo contido na página número 18
Install Control Knobs 7 Press 3 Control Knobs onto the valve stems as shown. Install Side Shelf Supports to Firebox Assembly 8 Attach Side Shelf Right Front and Back Supports to Firebox Assembly using 4 Flat Head Bolts (M6x12mm). Repeat same procedure to attach Side Shelf Left Front and Back Supports to Firebox Assembly. Note: Position the Supports so that the pins are at the bottom of the supports and extend towards the center of the firebox. Flat Head Bolt M6x
Resumo do conteúdo contido na página número 19
Attach Side Shelves 9 Position the Shelf Brackets to the inside of the Shelf Supports in the grill storage position. Attach Left and Right Shelves to Shelf Supports with 2 Step Bolts (M6) each. Securely tighten. Step Bolt M6 Qty: 4 Side Shelf Operation 10 Pull up on the Left Side Shelf and slide down over the support pins to secure in the upright position. To lower, slide shelves up and fold down into storage position.
Resumo do conteúdo contido na página número 20
Install Heat Diffusers, Cooking Grates, Warming Rack 11 Insert Heat Diffusers into the firebox by placing them into the indentations along the front and back of the firebox. See Figure 1. Place the Cooking Grates into the firebox with the Grate finger holes at the front. See Figure 2. Insert the Warming Rack into the slots of the firebox side panels as shown. See Figure 3.
