Resumo do conteúdo contido na página número 1
LP Gas Grill Assembly and Use Manual
6804 6805
For Outdoor Household Use Only. Not for Commercial Use.
Need Help? Need to Register Your Grill? Looking for Aussie Parts & Accessories?
Visit us online at www.AussieGrills.com Or call Aussie Customer Service at 1-800-251-7558
WARNING DANGER
! !
• Failure to follow these intructions could result in If you smell gas:
fire or explosion which could cause death, serious 1. Shut off gas to the appliance.
personal injury, or property damage. 2. Extinquish
Resumo do conteúdo contido na página número 2
2 NOTICE Meco Corporation strives to be a quality supplier of consumer products. If we omitted any parts needed for assembly, or you need troubleshooting information, please contact us using our toll free number or visit our website. It is important to register your grill and retain your receipt. 1-800-251-7558 Consumer Service Department 8 am - 5 pm E.S.T. Monday - Friday MECO CORPORATION 1-423-639-1171 (Telephone) 1500 Industrial Road 1-423-639-2570 (Fax) Greenville, TN 37745 USA www.aussi
Resumo do conteúdo contido na página número 3
3 Contents Preparation for Assembly ..............................................3 Before Using Your Grill Installation Codes ....................................................... 19 Packing Lists Selecting a Location ................................................... 19 Model 6804 .................................................................4 How to Perform a Leak Test ........................................ 19 Model 6805 ................................................................
Resumo do conteúdo contido na página número 4
4 Packing List- Model 6804 Box Description 1 Cabinet Bottom Panel 2 Bottom Panel 2 Cabinet Side Panel- Right Cabinet Side Panel- Left Warming Rack 6 3 Left Side Shelf with Side Burner Right Side Shelf Door/Drawer handle, 2 pcs. 3 Large Door handle Locking Caster, 2 pcs. Fixed Casters, 2 pcs. 3 Side Burner Cooking Grid Flame Diffuser, 4 pcs. Hardware Package 8 Cylinder Wire guard Cylinder Retainer Bolt 3 Side Burner Control Knob Grease Pan 3 Foil Pan C
Resumo do conteúdo contido na página número 5
5 Packing List- Model 6805 Box Description 1 Cabinet Bottom Panel Bottom Panel 2 Cabinet Side Panel- Right 2 Cabinet Side Panel- Left Warming Rack 3 Left Side Shefl with Side Burner 6 Right Side Shelf Door/Drawer handle, 3 pcs. Locking Caster, 2 pcs. Fixed Casters, 2 pcs. 3 Side Burner Cooking Grid Flame Diffuser, 4 pcs. 3 Hardware Package 3 3 Cylinder Wire guard Cylinder Retainer Bolt 3 Side Burner Control Knob Grease Pan 3 Foil Pan Cylinder Blocking Wire
Resumo do conteúdo contido na página número 6
6 Assembly Instructions Step 1 Caster Assembly Lay Cabinet Bottom Panel upside down, so that the flat surface is on the floor. Assemble Fixed Casters to the LEFT Side (the side closest to the cutouts) of Cabinet Bottom Panel and Swivel Lock Casters to the RIGHT Side of Cabinet Bottom Panel. Insert 1/4-20 x .60” Bolts through the caster bracket holes into the threaded holes in the Cabinet Bottom Panel. Tighten the bolts. Push the lever on the two Locking Casters to lock so the caster wheels do
Resumo do conteúdo contido na página número 7
7 7 Step 3 Side Panel Assembly Attach Left Side Panel and Right Side Panel to Cabinet Bottom Panel with six 1/4-20 x .50” Bolts and 1/4-20 Nuts. 1/4-20 x .50” Bolt set 6 pc Secure Left and Right Side Panels to Back Panel with four 5/32 x .31” Bolts through the inside of the Back Panel. 5/32 x .31” Bolt set 4 pc
Resumo do conteúdo contido na página número 8
8 Step 4 Front Crossbar Assembly Turn cart assembly up on casters. Attach Front Crossbar, with the triangle braces facing down and the flat surface to the front, to Side Panels with six 1/4-20 x .50” Bolts into the threaded holes in the top inside ends of Side Panels. front crossbar 1/4-20 x .50” Bolt set 6 pc Step 5 Cabinet Upright Assembly Attach Cabinet Upright to Cabinet Bottom and Front Crossbar with four 5/32 x .31” Bolts. Orient Upright so that Match- holder/Chain is closest to top of c
Resumo do conteúdo contido na página número 9
9 WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • Never remove guards or devices to prevent storage of spare or oversize LP Gas Cylinders not recommended for this grill. Step 6 A. Cylinder Guard Assembly Attach Wire Guard to Front Crossbar and Back Panel with two 5/32 x .47” Bolts. B. Cylinder Blocking Wire Assembly Attach Cylinder Blocking Wire to Right Side Panel with one 5/32 x .47” Bolt and nut. Attach to Bottom Panel with one 5/32 x .47” Bolt. B A
Resumo do conteúdo contido na página número 10
10 Step 8 Model 6805 & 6804 with drawer Drawer Track Assembly (and Cylinder Retaining Bolt Installation for Model 6805) A. Attach one Drawer Track to Back Panel and Cabinet Upright using four 5/32 x .31” Bolts. Attach other Drawer Track to Back Panel and Right Side Panel using four 5/32 x .31” Bolts. B. Install the Cylinder Retainer Bolt through the hole in the back of the Bottom Shelf into the nut welded underneath. A 5/32 x .31” Bolt set 8 pc B Cylinder Retainer Bolt Step 9 Model 6805 &
Resumo do conteúdo contido na página número 11
11 Step 10 Door Assembly Install LEFT Door. Drop bottom door pin into Cabinet Bottom Panel hole. Swing top of door toward hole in top of Left Side Panel. Depress spring-loaded pin with thumb while sliding pin into Left Side Panel hole until it snaps into place. Right Door assembly is similar; Fixed pin is under drawer and inserts into hole in door and spring-loaded pin is in the BOTTOM of small door and functions the same. Depress Left Door shown, Right Door under drawer. CAUTION ! To reduc
Resumo do conteúdo contido na página número 12
12 CAUTION ! Prior to performing any further assembly, PERFORM “FIRST TIME USE” LEAK TEST as detailed on pages 20-21. If the grill is fully assembled before performing the First Time Use leak test, the side tables will need to be removed in order to perform the leak test on the valves behind the knobs, inside the control panel. Step 12 Side Table Assembly A. Screw two 1/4-20 x .50” Bolts into the two bottom threaded inserts on the outside of the Bowl. Do not screw Bolts all the way. Leave 1/
Resumo do conteúdo contido na página número 13
13 Step 13 Model 6804 Side Burner Valve Assembly NOTE: Side Burner Valve is already attached to the regulator hose. A. Install the Side Burner Valve from underneath the LEFT Side Table. First insert the valve stem out through the hole in the bezel and fascia on the front of the side table. Next, flex the tube of the burner down and insert the nozzle into the opening in the burner tube. B. Install two 5/32” x .31” Bolts through the Control Knob Bezel and front of Side Table and into t
Resumo do conteúdo contido na página número 14
14 CAUTION ! To avoid possible damage to grill, DO NOT ATTEMPT TO LIFT GRILL BY THE SIDE TABLES Step 15 Side Burner Igniter Wire Connection The Side Burner Igniter Wire is pre-installed and connected to the Ignition Box. Attach the wire to the Side Burner elec- trode by sliding the wire connector onto the electrode terminal. Underside view of Side Table/Side Burner Note: Shown without Regulator Hose for clarity. Step 16 A. Side Burner Control Knob Assembly Align the flat keyed hole in the Cont
Resumo do conteúdo contido na página número 15
15 Step 17 A. Bottom Body Panel Assembly Slide the Bottom Body Panel into the guides of the Body assembly. Secure Bottom Body Panel to Body assembly with one 5/32 x .31” Bolt on each side. B. Foil Pan/Grease Pan Assembly Insert the Foil Pan into the Grease Pan. Slide the Grease Pan into the guides under the Bottom Body Panel. 5/32 x .31” Bolt 2 pc A B CAUTION ! To reduce the risk of a laceration hazard: • Wear protective gloves when installing warming rack. Hood and Bowl edges could be sharp
Resumo do conteúdo contido na página número 16
16 Step 19 Flame Diffuser/Cooking Grid Assembly A. Lay a Flame Diffuser from back to front over each Burner on the lower Body ridges. Place each Flame Diffuser in the individual guides to keep from sliding. B. Place the Cooking Grids over the Burner Diffusers on the upper Body ridges. A flame diffuser B cooking grid Step 20 Battery in Igniter Installation Unscrew Igniter Cover and insert AA Battery with the negative “-“ end going in first. Replace the cover and tighten securely. Battery AA 1.5
Resumo do conteúdo contido na página número 17
17 Connecting/Disconnecting the Gas Using Gas DANGER ! Carbon Monoxide Hazard • This appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. • Never use this appliance indoors, on recreational vehicles, or boats. WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • Use only propane gas with this LP gas grill. • Do not attempt to convert an LP unit to natural gas. • Always use a gas appliance outdoors in an open area
Resumo do conteúdo contido na página número 18
18 LP Hose and Regulator WARNING ! To reduce the risk of serious bodily injury or death NOTE: from fire or explosion: If the hose/regulator assembly is not working properly • Clean and inspect the gas hose/regulator before and you need a replacement, contact Customer Service each use of the outdoor cooking gas appliance. at 1-800-251-7558 or go to www.aussiegrills.com. The gas hose/regulator must be replaced prior to being used, if there is evidence of excessive abra- Be sure to have the g
Resumo do conteúdo contido na página número 19
19 Before Using Your LP Gas Grill Installation Codes WARNING ! To reduce the risk of serious bodily injury or death from fire or explosion: • This installation must conform with local codes or, in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54 Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2 or the Standard for Recreational Vehicles, ANSI A 119.2/NFPA 1192 and CSA Z240 RV Series, recreational Vehicle C
Resumo do conteúdo contido na página número 20
20 How to Perform A Leak Test “FIRST TIME USE” and as required Supplies Needed for a Leak Test: • Clean paint brush • Water • Dish washing liquid 1. Use an LP Gas Cylinder equipped with an OPD (Overfill Prevention Device) and have it filled at an authorized LP gas dealer by a qualified attendant. 2. Make sure all grill Control Panel Knobs are turned to the “Off” position and verify that the LP Gas Cylinder valve is closed by turning the knob on the LP Gas Cylinder clockwise until it stops. 3.
