Resumo do conteúdo contido na página número 1
15” LCD Television
FLM-1514, FLM-1514B, FLM-153B, FLM-1517
Your LCD TV may look slightly different from the one pictured above.
20061004
Resumo do conteúdo contido na página número 2
Table Of Contents Important Safety Instructions--------------------------------------------------1 Product Features ---------------------------------------------------------3 Front Panel---------------------------------------------------------------------------4 Rear Panel----------------------------------------------------------------------------5 Remote Control---------------------------------------------------------------------6 System Connections-----------------------------------------
Resumo do conteúdo contido na página número 3
Important Safety Instructions The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (s
Resumo do conteúdo contido na página número 4
Important Safety Instructions Note: 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such
Resumo do conteúdo contido na página número 5
Product Features This product incorporates LCD display and TV receiver in one system. Special Function Multiple Mode Support sleep time setting function. Component mode VGA mode Multi-audio and Multi-video modes TV mode Support multi-audio and multi-video modes, Composite mode provide more selecting. S-VIDEO mode Auto TV Searching Function High Quality Property Can be connected to the TV antenna, support Auto TV programs searching funct
Resumo do conteúdo contido na página número 6
Front Panel 1. INPUT button Press to select the modes: Component, VGA, TV, Composite or S-VIDEO. 2. MENU button Press to enter or exit setup menu. 3. CH ▲/ ▼ button In the TV mode, press to select channels. In setup menu, the same function as ▲/ ▼ direction buttons. 4. VOL ◄/ ► button In the TV mode, press to decrease or increase the volume. In setup menu, the same function as ◄/ ►direction buttons. 5. POWER button Press to
Resumo do conteúdo contido na página número 7
Rear Panel 1. Component Input / L/R Audio Input Jack 5. VGA Input Jack Connected to the Component (YPbPr) input Connected to the VGA output jack on a in Component mode. personal computer. Connected to the L/R audio input in 6. PC AUDIO Input Jack Component mode. Connected to the PC audio output jack. 2. S-VIDEO Input Jacks 7. TV Signal Input Jack 3. VIDEO/L/R Audio Input Jack Connected for the external NTSC TV Connected to the
Resumo do conteúdo contido na página número 8
Remote Control Remote Control Drawing 1. INPUT button Press to select the modes: Component, VGA, TV, Composite or S-VIDEO. 2. 0~9 Number buttons Press to select numbers. 3. LAST button In the TV mode, press to return to the channel last viewed. 4. MUTE button Press to turn on or off the speaker output. 5. Direction buttons ( ▲▼◄ ►) In the setup menu, press the ▲▼button to select the desired item and press the ◄► button to ad
Resumo do conteúdo contido na página número 9
Remote Control Preparation of Remote Control Using of Remote control Point the remote control unit from no more than Softly push the back cover to open the battery about 7m from the remote control sensor and compartment. within about 60 degrees of the front of the unit. Insert two batteries (1.5V, size AAA) into the compartment, please make sure the polarity matches the marks inside the compartment.
Resumo do conteúdo contido na página número 10
System Connections • Do not connect the power cord until all other connections have been made. • Ensure that you observe the color cord when connecting audio and video cables. Connecting to External AV Signal Source Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source and then press the INPUT button to shift to Compo
Resumo do conteúdo contido na página número 11
System Connections Connecting to External AV Signal Source Use the audio cable to connect the audio input jacks on the rear panel of the unit to the external AV signal source. Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and the external AV signal source and then press the INPUT button to shift to S-VIDEO mode.
Resumo do conteúdo contido na página número 12
System Connections Connecting to External AV Signal Source (COMPONENT) Use the audio and video cables to connect the COMPONENT (Y/Pb/Pr) input Jacks on the rear panel of the unit to the external AV signal source. After connection, turn on the power of the unit and external AV signal source and then press the INPUT button to shift to Component mode. - 11 -
Resumo do conteúdo contido na página número 13
System Connections Connecting to PC The unit can be connected to PC (person computer) via the VGA cable. Follow the steps and the figure below to connect: 1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit. 2. Connect the other end to the PC. 3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit. 4. Connect the other end to the PC audio output jack. 5. Please set the PC’s resolution at 102
Resumo do conteúdo contido na página número 14
System Connections Connecting the Power Cable Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will not the used for a long time, disconnect the plug from the outlet. - 13 -
Resumo do conteúdo contido na página número 15
System Connections Connecting to TV Signal This unit can be connected to the TV signal input source via the TV jack on the rear panel. After connection, turn on the power of the unit, press the INPUT button to shift to TV mode. After connecting to the antenna, turn on the unit, and go on with program searching, you can follow the below steps to select channels: 1. For 0~9 channel: Press the number buttons to select the channel X, wa
Resumo do conteúdo contido na página número 16
TV Function Preparations 1. After connection, press the POWER button to turn on the power. 2. Press the INPUT button to shift to TV mode. You can go on with the following operations: Image Setting Note: This item is only available when there is signal input. Press the MENU button once to enter the setup menu, as shown on the right: In the setup menu, press the ▲▼ button to select Image and then press the OK button to enter the item. Press the
Resumo do conteúdo contido na página número 17
TV Function Contrast Setup Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Hue Setup Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU button to return to the previous menu. Saturation Setup Press the ▲▼ button to select Saturation and press the ◄► button to adjust the value. Press the MENU button to return to the previous
Resumo do conteúdo contido na página número 18
TV Function Treble Setup Press the ▲▼button to select Treble and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. Balance Setup Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the MENU button to return to the previous menu. MTS Setup Press the ▲▼ button to select MTS and press the OK button to enter. Press the ▲▼ button to select the desired item and then press
Resumo do conteúdo contido na página número 19
TV Function Parental Setting Note: The Parental Function is the same as that of V-CHIP. Press the MENU button to enter the setup menu. Press the ▲▼ button to select Parental and p ress the OK button to enter the menu shown on the right. In the Parental setup menu, press the OK button and then use the number buttons to enter th e pin. The default pin is 1111. Then pre ss the OK button to continue and display the menu a s shown on t
Resumo do conteúdo contido na página número 20
TV Function Clear All Press the ▲▼ button to select Clear All and press the OK button to enter. Press the ▲▼ button to select the desired item and then press the OK button to confirm your selection. Press the MENU button to return to the previous menu. TV Rating Press the ▲▼ button to select TV Rating and press the OK button to enter. Press the ▲▼ button to select the desired item and then pre ss the OK button to confirm your selection. Press
