Manual do usuário Harbor Freight Tools 36397

Resumo do conteúdo contido na página número 1

8 Ton Round Bottom
Long Ram Hydraulic Jack
36397
ASSEMBLY & OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
TO PREVENT SERIOUS INJURY,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS BEFORE USE.
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion
of this manual or any artwork contained herein may

Resumo do conteúdo contido na página número 2

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No._____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Finish: Baked enamel Capacity: 8 Ton 1 Maximum Height: 44- / ” 2 1 Minimum Height: 24- / ” 4 1 Stroke: 19- / ” 4 5 Shaft D

Resumo do conteúdo contido na página número 3

10. Keep children away. Children must never be allowed in the work area. 11. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across the Jack during use. 12. Never leave the product unattended while supporting an object. 13. Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before operating. 14. Never place your hands or other body parts near a hydraulic fluid leak. Never check f

Resumo do conteúdo contido na página número 4

Note: Only use pins that are intended for supporting this type of Jack, are capable of supporting 8 Tons, and ensure that the pins are properly secured before use. Note: This Jack is not intended for horizontal use. 2. Insert the Handle (26) into the Handle Socket (27). Raising and Lowering 1. To raise the Hydraulic Jack turn the Release Valve (18) clockwise until the valve is tightly closed. Pump the Handle (26) to raise the Jack. Continue to pump the Handle (26) until the Hydraulic Jack is a

Resumo do conteúdo contido na página número 5

Unpacking When unpacking your 8 Ton Long Ram Hydraulic Round Bottom Jack, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Part # Description Qty. Part # Description Qty. 1 Valve Body 1 17 Seal Ring 1 2 Copper Washer 1 18 Release Valve 1 3 Cylinder 1 19 Steel Ball 1 4 O-Ring 1 20 Copper Washer 1 5 O-Ring Retainer 1 21 Pump Cylinder 1 6 Ram 1 22 O-ring 1 7 Top Nut 1 23 Back Up Ring 1 8 O-Ring 1 24 Plunger