Resumo do conteúdo contido na página número 1
OPERATION MANUAL
Resumo do conteúdo contido na página número 2
Important Information DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc. Address: 9351 Jeronimo Road, Irvine, California 92618 U.S.A. Tel. No.: +1 - (949) 465-6000
Resumo do conteúdo contido na página número 3
IMPORTANT INFORMATION FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: • The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safety
Resumo do conteúdo contido na página número 4
IMPORTANT INFORMATION (Continued) • When operating the LCD monitor with an AC 100-120V power supply in North America, use a power supply cord provided with this monitor. • When operating the LCD monitor with an AC 220-240V power supply in Europe, use a power supply cord provided with this monitor. • In UK, use a BS-approved power cord with molded plug having a black (10A) fuse installed for use with this monitor. If a power cord is not supplied with this monitor, please contact your supplier.
Resumo do conteúdo contido na página número 5
DEAR MITSUBISHI CUSTOMER Thank you for your purchase of a MITSUBISHI LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can
Resumo do conteúdo contido na página número 6
SAFETY PRECAUTIONS (Continued) 15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement parts specifi ed by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorised parts can result in fi re, electric shock and/or other danger. 16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to ensure that the produc
Resumo do conteúdo contido na página número 7
TIPS AND SAFETY INSTRUCTIONS - The TFT colour LCD panel used in this monitor is made with The Power Cord the application of high precision technology. However, there - Do not damage the power cord nor place heavy objects on may be minute points on the screen where pixels never light it, stretch it or over bend it. Also, do not add extension cords. or are permanently lit. Also, if the screen is viewed from an Damage to the cord may result in fi re or electric shock. acute angle there may b
Resumo do conteúdo contido na página número 8
Contents Introduction Basic Operation IMPORTANT INFORMATION ............................................1 Turning Power On/Off ....................................................14 DEAR MITSUBISHI CUSTOMER .....................................3 Turning on the main power ........................................14 SAFETY PRECAUTIONS ..................................................3 Turning power on/off ..................................................14 TIPS AND SAFETY INSTRUCTIONS ...........
Resumo do conteúdo contido na página número 9
Supplied Accessories If any component should be missing, please contact your dealer. Liquid Crystal Display: 1 Remote control unit: 1 Stand hole protection cover: 2 Power cord: 1 R-6 battery: 2 CD-ROM (Utility Disk for Windows): 1 Operation manual: 1 * MITSUBISHI ELECTRIC CORPORATION holds authorship rights to the Utility Disk programme. Do not reproduce it without permission. * For environmental protection! Do not dispose of batteries in household waste. Follow the disposal inst
Resumo do conteúdo contido na página número 10
Part Names nRear view 1. RS-232C output terminal (D-sub 9 pin) (See page 24.) 16 1 2. RS-232C input terminal (D-sub 9 pin) (See page 24.) 2 3. AV3 input terminal (BNC) (See page 10.) 3 4. AV2 input terminals (BNC) (See page 10.) 5. PC3 input terminals (BNC) (See page 10.) 4 6. PC audio input terminal (See page 10.) 7. PC2 input terminal (Mini D-sub 15 pin) (See page 10.) 5 8. AV audio input terminals (See page 10.) 6 9. PC/AV audio output terminals (See page 11.) 7 10. PC1 input termin
Resumo do conteúdo contido na página número 11
How to Install the Monitor Mounting precautions • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people. • When moving the monitor, be sure to hold it with the handles both on the rear and the unit bottom. Do not hold the LCD panel. This may cause product damage, failure, or injury. • Install the monitor with the surface perpendicular to a lev
Resumo do conteúdo contido na página número 12
Connecting Peripheral Equipment Caution Connection with AV equipment • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/ AV1 input terminal disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input terminal with the output terminal when connecting cables. Mixing up the input and output terminals may cause malfunctions and the other AV2 input terminals problems. AV audio input te
Resumo do conteúdo contido na página número 13
Connecting Peripheral Equipment Other terminals Connecting multiple monitors PC/AV audio output terminals You can connect multiple monitors (up to 5 monitors) in a • Audio from the equipment connected to the AV audio input daisy chain by using the PC1/AV1 input terminals and PC/AV terminals or PC audio input terminal is output. Connect to output terminals of this monitor. the audio input terminals of the connected equipment using a commercially available audio cable (RCA). Connection example
Resumo do conteúdo contido na página número 14
Connecting the Power Cord Caution • Do not use a power cord other than the one supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. Main power switch 3. Plug the power cord (supplied) into the AC power outlet. 1 3 For power outlet 2 AC input terminal Power cord (Supplied) Preparing the Remote Control Unit Installing and removing the remote Remote control operation range The operation range of the remote control unit is appro
Resumo do conteúdo contido na página número 15
Removing the Temporary Stand and the Handles nRemoving the Temporary Stand nRemoving the Handles Prepare wall-hanging brackets or a stand to mount the monitor The handles are detachable. unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the rear of the monitor.) Caution • The monitor is heavy. Make sure to handle the monitor with at least 3 people. • This monitor is fi xed to the temporary s
Resumo do conteúdo contido na página número 16
Turning Power On/Off Caution TIPS • Turn on the monitor fi rst before turning on the PC or • If the monitor is in the input signal standby mode and you playback device. press the POWER button on the remote control unit, the monitor enters standby mode. • You can turn on/off the monitor by pressing the power Turning on the main power switch of the monitor. • Setting the SCHEDULE fl ashes the power LED alternately in red and orange in standby mode. Date/time setting • If the time has yet to be s
Resumo do conteúdo contido na página número 17
Basic Operation 5. BRIGHT +/- (Backlight adjustment) Pressing or displays the BRIGHT menu when the menu screen is not displayed. 1 BRIGHT 15 2 3 Press or to adjust the brightness. 4 * If you do not press any buttons for about 4 seconds, the BRIGHT menu automatically disappears. 5 6. SIZE (Screen size selection) The menu is displayed. Press or to select the screen size. (See page 16.) 7. DISPLAY 6 7 Displays monitor information. The display disappears when this button is pressed again or
Resumo do conteúdo contido na página número 18
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fi lls the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fi ll the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fi ll the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 cut
Resumo do conteúdo contido na página número 19
Menu Items nMenu screen display Displaying the menu screen 1 3 2 4 Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu SCREEN PICTURE 1/2 PC2 ANALOG items. See pages 18 to 20 for details of each menu items. PICTURE AUTO AUDIO CONTRAST 30 nExample of operation SETUP BLACK LEVEL 96 (Adjusting CONTRAST in the PICTURE menu) OPTION SHARPNESS 12 MENU 1. Press to display the menu screen. ENLARGE PIP/PbyP SCREEN SCREEN 1/1 PC2 ANALOG PI
Resumo do conteúdo contido na página número 20
Menu Items COLOR MODE Menu item details Changes the colour mode on the screen. The colour mode The menu will differ depending on the input mode. on the screen can also be changed using a remote control unit. (See page 15.) nSCREEN (PC2/PC3) * sRGB is PC input only. See page 15 for details. AUTO WHITE BALANCE The CLOCK, PHASE, H-POS, and V-POS are automatically THRU .............. Displays the input signal level as is. adjusted. (for PC1 only) Pressing performs adjustment. PRESET ........
