Resumo do conteúdo contido na página número 1
®
ViewSonic
N2060w
LCD TV
- User Guide
- Guide de l’utilisateur
- Guía del usuario
Model No. : VS11287-1M
Resumo do conteúdo contido na página número 2
CONTENTS Compliance information ----------------------------------------------- 1 Important Safety Instructions ---------------------------------------- 2 Copyright Information-------------------------------------------------- 3 Product Registration--------------------------------------------------- 3 Antenna Installation Instructions------------------------------------ 4 PREPARATION -------------------------------------------------------- 6 OPERA
Resumo do conteúdo contido na página número 3
Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
Resumo do conteúdo contido na página número 4
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the LCD TV” in this guide for further instructions. 7. Do not block any
Resumo do conteúdo contido na página número 5
Copyright Information ® Copyright © ViewSonic Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer:ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product improveme
Resumo do conteúdo contido na página número 6
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges, Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding
Resumo do conteúdo contido na página número 7
CONNECT PERIPHERAL EQUIPMENT FRONT PANEL CONTROL KNOBS Source ①: Press to select your input source. Volume ②③: Press to confirm your function selection (when the OSD main menu displayed) or adjust volume (without OSD main menu) Channel④⑤: Select the intended function by pressing the two keys (when the OSD main menu displayed), or switch the channels in the TV mode (without OSD main menu) Menu : ⑥ Press to show the OSD menu and exit OSD menu at the TV mode Powe
Resumo do conteúdo contido na página número 8
There is a wide range of video and audio equipment could connect to your TV. The following connection diagrams show you how to connect them. PREPARATION Lay the LCD TV with the screen down on a table, as it will be easier to connect your peripheral equipment. Please take precaution on page9 not to damage the screen. 1. VGA audio input 2. VGA input 3. AC power input terminal 4. Headphone outlet 5. AV signal input 6. Left audio track input (AV/S-Video) 7. Right audio
Resumo do conteúdo contido na página número 9
OPERATING INSTRUCTIONS USE OF THE REMOTE CONTROL MUTE Temporarily interrupt the POWER Press to turn on/off the sound or restore it. TV. The TV is never completely powered off DISPLAY unless it is physically Press this button to unplugged. Display Channel number on the right-top corner. 0~9/100 Digit buttons To select a TV channel. PRE-CH To display the previous CH s
Resumo do conteúdo contido na página número 10
3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to per-sonal injury. Disp
Resumo do conteúdo contido na página número 11
PREPARATION 1. Assembly Take out TV and base from carton, assembled by three pieces screws, which you could find from the accessory box. Shown in the figures below: Place the base on a solid surface Note: Lock the screw middle first, then the others, to avoid holes aiming incorrectly ViewSonic 9 N2060w
Resumo do conteúdo contido na página número 12
2. Place the TV on a solid surface. Ensure that the TV placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be exposed to dripping or splashing. 3. Insert the aerial plug firmly into the aerial socket at the back of the TV. 4. Power
Resumo do conteúdo contido na página número 13
TO USE THE MENUS 1. Press the MENU button to display or close main menu. 2. Use the cursor up/down to select a menu item. 3. Use the cursor left/right to enter a submenu or enable/disable the function. 4. Press the MENU button to exit the menu. MAIN MENU Press the MENU button to enter the main OSD (On Screen Display). Adjust the items including Picture Setup, Sound setup, Child Lock Setup, Function Setup and TV setup. When the input source is PC or Component mode, could
Resumo do conteúdo contido na página número 14
When the input source is TV mode, could select the Sound Setup, Picture Setup, Child Lock Setup, Function Setup and TV Setup. Shown in the figure below: Sound Setup (Same in PC, TV, AV, S-Video and Components modes) 1. The range of volume, bass and treble is 0~100. 2. Select “ON” or “OFF” in sound selection to control the sound output. 3. The range of Balance is -50~+50. Adjusted from 0 to -50, the sound from the right track fades until silent. Adjusted from 0 to +50, the sound from
Resumo do conteúdo contido na página número 15
Picture Setting When the input source is in PC mode, you can select Brightness, Contrast, Position, Video noise, Sharpness, Auto Adjust, Info, Color Temp.,（ Red, Green, Blue can be adjusted) and Reset to Default. Shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100. 2. Position: There are two options, Horizontal and Vertical, could adjust from -50 to +50. 3. Video noise: There are two options, Phase and Clock, could adjust from -50 to +50. 4. Sh
Resumo do conteúdo contido na página número 16
When the input source is in TV/AV/S-VIDEO/YPbPr mode, you can select Brightness, Contrast, Color, Sharpness, Hue, Dyn. Skin Tone, Color Temp., Zoom and Reset to Default respectively; shown in the figure below: 1. Brightness and Contrast: Could adjust from 0 to 100 to adjust the luminance of picture. 2. Color: Could adjust from 0 to 100 to adjust the color saturation of picture. 3. Sharpness: Five options: Softest, Soft, Auto, Sharp and Sharpest. You can adjust the sharpness o
Resumo do conteúdo contido na página número 17
Function Setup When the input source is in TV, AV or S-Video mode, you can select OSD Time Out, Language, Child lock, Sleep Timer, CC Mode and Reset to Default. Shown in the figure below: 1. OSD Time Out: Could set OSD display time from 10 seconds to 60 seconds 2. OSD language setting: Three languages provided - English, French and Spanish. 3. Child Lock Setup: (1). Can enter the V-Chip level setting only if the Child Lock is O
Resumo do conteúdo contido na página número 18
OSD Time Out, Language, Sleep Timer and Reset to Default options are operated similarly as the above instructions Child Lock When the input source is in TV, AV or S-Video mode, V-Chip level can be set. You can enter the Child Lock setting only when the Child Lock is ON. When you enter the Child Lock setting, a message on the display will prompt you to enter password: You can enter the Child Lock setting to set up the V-Chip level when you enter the correct password: 1.
Resumo do conteúdo contido na página número 19
The empty box refers to unlocked; the solid box refers to locked. TV Setting The following menu appears only in the TV mode. 1. Channel No.: Shows the current channel number. 2. Tuning Mode: Select the mode of TV signal - Cable\HRC Cable\IRC Cable\ Broadcast. 3. System Standard: NTSC-M 4. Auto Search: Select "Auto Search" to search all signaled channel; when the search is complete, it stays at the first channel with signal and all ViewSonic 17
Resumo do conteúdo contido na página número 20
channels that have been located are stored. If you would like to stop "Auto Search" during the process, press the function button. 5. Fine Tuning: NTSC-M is seldom used. 6. AFC can be set to ON or OFF. When it is set to ON, the TV will search the TV signal automatically; when there is any offset in the signal, it will automatically adjust the channel to the correct position. 7. Skip can be set to ON or OFF. When it is set to ON, a channel can be skipped by pressing the switching button o
