Resumo do conteúdo contido na página número 1
PN-R703
PN-R603
LCD MONITOR
OPERATION MANUAL
Resumo do conteúdo contido na página número 2
IMPORTANT: To aid reporting in case of loss or theft, please record the Model No.: product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Serial No.: U.S.A. ONLY
Resumo do conteúdo contido na página número 3
IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the CAUTION presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of RISK OF ELECTRIC sufficient magnitude to constitute a risk of electric SHOCK shock to persons. DO NOT OPEN The exclamation point within a triangle is intended to alert th
Resumo do conteúdo contido na página número 4
DEAR SHARP CUSTOMER Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in
Resumo do conteúdo contido na página número 5
SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specified batteries only. • Install the batteries with due attention to the plus (+) and minus (-) sides of the batteries according to the instructions in the compartment. • Do not mix old and new ba
Resumo do conteúdo contido na página número 6
TIPS AND SAFETY INSTRUCTIONS - The TFT color LCD panel used in this monitor is made with The Power Cord the application of high precision technology. However, there - Use only the power cord supplied with the monitor. may be minute points on the screen where pixels never light - Do not damage the power cord nor place heavy objects on or are permanently lit. Also, if the screen is viewed from it, stretch it or over bend it. Also, do not add extension cords. an acute angle there may be une
Resumo do conteúdo contido na página número 7
MOUNTING PRECAUTIONS • This product is for use indoors. • Adhere to the following when installing the monitor in its • A mounting bracket compliant with VESA specifications is portrait orientation. Failing to adhere to the following may required. cause malfunctions. • Since the monitor is heavy, consult your dealer before - Install the monitor such that the power LED is located on installing, removing or moving the monitor. the bottom side. • Mounting the monitor on the wall requires specia
Resumo do conteúdo contido na página número 8
Contents IMPORTANT INFORMATION ............................................3 Initialization (Reset)/Functional Restriction Setting DEAR SHARP CUSTOMER ..............................................4 (FUNCTION) ....................................................................32 SAFETY PRECAUTIONS....... ...........................................4 Controlling the Monitor with a PC (RS-232C) ..............33 TIPS AND SAFETY INSTRUCTIONS ...............................6 PC connection ..........
Resumo do conteúdo contido na página número 9
Part Names Accessing the operation panel nFront view 1 1. LCD panel 2. Remote control sensor (See page 15.) 3. Input switch (See page 18.) 4. Power switch (See page 16.) 5. Power LED (See page 16.) TIPS • Use a pointed object such as a pen tip to press the switches. 2 34 5 nRear view 1. Optional attachment section 21 This section is used to connect optional 12 hardware for function expansion. Offering this 13 attachment location is not a guarantee that future compatible hardware attach
Resumo do conteúdo contido na página número 10
Part Names nRemote control unit 1. Signal transmitter 1 2. POWER button (See page 16.) 3. MUTE button (See page 18.) 4. VOL +/- buttons (See page 18.) BRIGHT +/- buttons (See page 18.) Cursor control ( / / / ) buttons 7 2 5. DISPLAY button (See page 18.) 6. MODE button (See page 18.) 3 8 7. INPUT button (See page 18.) 8. MENU button (See page 18.) 4 9 9. ENTER button (See page 18.) 10. RETURN button (See page 18.) 10 1 1. SIZE button (See page 18.) 11 5 6 E 10
Resumo do conteúdo contido na página número 11
Connecting Peripheral Equipment 13 11 12 10 5 3 4 12 8 96 7 Caution Connection with a PC or AV equipment • Be sure to turn off the main power switch and disconnect 1. DisplayPort input terminal the plug from the power outlet before connecting/ • Use a commercially available DisplayPort cable. disconnecting cables. Also, read the manual of the • Select the audio input terminal to be used in DisplayPort equipment to be connected. of AUDIO SELECT on the SETUP menu. • Be careful not to confuse
Resumo do conteúdo contido na página número 12
Connecting Peripheral Equipment 8. DisplayPort output terminal • The video of the DisplayPort input can be output to an external device. • Use a commercially available DisplayPort cable. • Outputting HDCP-encrypted video requires an external device which supports HDCP. • This terminal allows the daisy chain connection (up to 25 monitors or up to 4 monitors when transmitting HDCP- encoded content) by connecting the monitors to each other through the DisplayPort input terminal of each monito
Resumo do conteúdo contido na página número 13
Connecting the Power Cord Caution • Use only the power cord supplied with the monitor. 1. Turn off the main power switch. 2. Plug the power cord (supplied) into the AC input terminal. 3. Plug the power cord (supplied) into the AC power outlet. Main power switch 1 AC input terminal 2 Power cord (Supplied) 3 For power outlet E 13
Resumo do conteúdo contido na página número 14
Binding Cables The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. Insert the cable clamp into the cable clamp attachment on the rear of the monitor and fasten the cables. Use the supplied cable clamp (stick-on) affixed to the rear of the monitor. Cable Where you attach the cable clamp, please remove the dirt. Cable clamp attachment (2) Cable clamp (3) (1) * Do not cover the vents. E 14
Resumo do conteúdo contido na página número 15
Preparing the Remote Control Unit Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly. 3. Close the cover. TIPS • When the batteries become exhausted, replace them with new (commercially available) batteries. • The supplied batteries (R-6 (“AA” size) x 2) may become exhausted quickly depending on
Resumo do conteúdo contido na página número 16
Turning Power On/Off Caution Turning power on/off • Turn on the monitor first before turning on the PC or Press the POWER button or POWER switch to turn the power playback device. ON/OFF. Turning on the main power Main power switch Power switch Power LED Status Status of the monitor Green lit Power on Orange lit Power off (Standby mode) Caution Green flashing Input signal waiting mode • The main power must be turned on/off with the main power It is possible to check the power LED even when th
Resumo do conteúdo contido na página número 17
Turning Power On/Off nDate/time setting Disabling power on/off operations • If the time has yet to be set when the monitor is first turned Power on/power off operations can be disabled in order to on, the date/time setting screen appears. Set the date and protect the monitor from an accidental power off. Set the time. ADJUSTMENT LOCK in FUNCTION menu to “ON 2”. (See page 32.) DATE/TIME SETTING // : : 01 / 01 / 20 13 12 : 00 AM OK···[ENTER] CANCEL···[RETURN] 1. Press or to select the
Resumo do conteúdo contido na página número 18
Basic Operation 4. VOL +/- (Volume adjustment) Pressing or displays the VOLUME menu when the menu screen is not displayed. 1 VOLUME 15 2 3 Press or to adjust the volume of the sound. 4 * If you do not press any buttons for about 4 seconds, the 5 VOLUME menu automatically disappears. 5. BRIGHT +/- (Brightness adjustment) Pressing or displays the BRIGHT menu when the menu screen is not displayed. 6 7 BRIGHT 15 8 9 Press or to adjust the brightness. 10 * If you do not press any buttons f
Resumo do conteúdo contido na página número 19
Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE PC input Displays image so it fills the entire screen. AV input An image with a 4:3 aspect ratio is stretched to fill the entire screen. ZOOM 1 PC input An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. The edges of the image may be cut off. AV input ZOOM 2 PC input Use this size if ZOOM 1 c
Resumo do conteúdo contido na página número 20
Menu Items TIPS Displaying the menu screen • The menu will differ depending on the input mode. Video and audio adjustment and settings of various functions • The menu screen will close automatically if no operation is are enabled. This section describes how to use the menu performed for about 15 seconds. (DATE/TIME SETTING, items. See pages 20 to 29 for details of each menu items. SCHEDULE and LAN SETUP screens will close in about 4 minutes.) Caution Menu screen display • Do not turn the ma
